Abstract is missing.
- Modelling power flow in a hoist motor of a Rubber Tyred Gantry craneStefano Pietrosanti, William Holderbaum, Victor M. Becerra. 1-6 [doi]
- Low power driving techniques for 1-pixel displaysHiroyuki Manabe, Munekazu Date, Hideaki Takada, Hiroshi Inamura. 1-7 [doi]
- Coenergy based transient model of interior permanent synchronous machinesRoy D. Schultz, Lin Zhao. 1-7 [doi]
- Designs and feasibility assessments of an integrated linear electromagnetic actuator for cold roll mill applicationsCheng-Tsung Liu, Yu-Wen Chiu, Chang-Chou Hwang. 1-7 [doi]
- Reducing costs and saving energy in the tandem rolling of hot metal strip by the use of an advanced control methodJohn Pittner, Marwan A. Simaan. 1-8 [doi]
- Modeling and control of a low speed flywheel driving system for pulsed load mitigation in DC distribution networksAhmed T. Elsayed, Tarek A. Youssef, Osama A. Mohammed. 1-6 [doi]
- An induction generator based AC/DC hybrid electric power generation system for more electric aircraftYijiang Jia, Kaushik Rajashekara. 1-7 [doi]
- Neutral grounding in MV transformers substations for cranes serviceGiuseppe Parise, Luigi Parise, Marco Martufi, Chun-Lien Su, P. B. Chavdarian, Sergio Panetta. 1-6 [doi]
- Flow characteristics of a two stage EHD gas pump in circular pipeY. Birhane, S.-C. Lin, F. C. Lai. 1-9 [doi]
- Premises of using triboelectric charge for identification of the granular product flowing in a pneumatic transport systemImene Nassima Mahi, Khouira Senouci, Amar Tilmatine, Radjaa Messafeur, Farid Miloua, Lucien Dascalescu. 1-6 [doi]
- A coordinated control approach for DC link and rotor crowbars to improve fault ride-through of DFIG based wind turbinesAhmed M. A. Haidar, Kashem M. Muttaqi, Mehrdad Tarafdar Hagh. 1-8 [doi]
- Analysis and mitigation of parallel resonance in the distribution systemBhim Singh, Ikhlaq Hussain, Ambrish Chandra, Kamal Al-Haddad. 1-6 [doi]
- Comparison between the surface-electric-potential characteristics of tribo- and corona-charged polymersYopa Prawatya, Bogdan Neagoe, Thami Zeghloul, Lucian Dascalescu. 1-5 [doi]
- Fast dynamics current control of DCM flyback as PFC front converter for lighting applicationsPablo J. Quintana, Jorge García, Jesús Cardesín Miranda, Maicol F. de Melo, Marco A. Dalla Costa. 1-6 [doi]
- Ultrafine particle collection performance of an two-stage ESP using a novel mixing type carbon brush charger and parallel collection platesHak Joon Kim, Bangwoo Han, Chang-Gyu Woo, Yong Jin Kim, Seong-Jin Park, Jong-Pil Yoon. 1-7 [doi]
- Resonant inverter power and coil parameters determination for metal surface hardeningA. Attab, H. Zeroug, B. Meziane. 1-8 [doi]
- A novel ambiance changing energy saving LED lighting system with PFM operated Zeta converterSomnath Pal, Bhim Singh, Ashish Shrivastava, Ambrish Chandra, Kamal Al-Haddad. 1-8 [doi]
- A wide area protection scheme for smart distribution network with DGMi Xu, Ying Sun, Kejun Li, Wenwen Xiao, Hao Li, Hongxia Gao. 1-5 [doi]
- Intelligent control algorithms for optimal reconfiguration of microgrid distribution systemFarshid Shariatzadeh, Nikhil Kumar, Anurag K. Srivastava. 1-8 [doi]
- New aero-dynamic tribo-charging device with application to the electrostatic separation of granular mixtures of insulating materialsFekir D. Eddine, Mohamed Miloudi, Farid Miloua, Karim Medles, Lucian Dascalescu. 1-5 [doi]
- Study of VOC removal and E. Coli sterilization in six-mat space by atmospheric microplasmaKazuo Shimizu, Yusuke Kurokawa, Marius Blajan. 1-6 [doi]
- Examining the interactions between DG units and voltage regulating devices for effective voltage control in distribution systemsD. Ranamuka, Ashish P. Agalgaonkar, Kashem M. Muttaqi. 1-8 [doi]
- A new protection scheme for multi-bus DC power systems using an event classification approachMustafa Farhadi, Osama A. Mohammed. 1-7 [doi]
- High-power-factor LED driver based on input current shaper using a flyback converterG. G. Pereira, Maicol F. de Melo, Marco A. Dalla Costa, J. Marcos Alonso. 1-6 [doi]
- Pilot-scale exhaust gas treatment for a glass manufacturing system using a plasma combined semi-dry chemical processHashira Yamamoto, Yuri Yamamoto, Tomoyuki Kuroki, Kota Yoshida, Hidekatsu Fujishima, Masaaki Okubo. 1-7 [doi]
- Modeling and efficiency-based control of interleaved LLC converters for PV DC microgridWeiran Dai. 1-8 [doi]
- Parasitics assisted soft-switching and naturally commutated current-fed bidirectional push-pull voltage doublerDebjani Chakraborty, Akshay Kumar Rathore, Elena Breaz, Fei Gao. 1-8 [doi]
- Microplasma actuator for EHD induced flowMarius Blajan, Yoshinori Mizuno, Akihiko Ito, Kazuo Shimizu. 1-7 [doi]
- Utility-accessible external disconnect switch suppression in PV microgeneration: Brazilian scenarioNicole Foureaux, Fernando V. Amaral, Sidelmo M. Silva, Jose A. Brito, Braz de Jesus Cardoso Filho. 1-6 [doi]
- Self-sensing control of permanent-magnet synchronous machines with multiple saliencies using pulse-voltage-injectionLei Chen, Gunther Gotting, Simon Dietrich, Ingo Hahn. 1-9 [doi]
- Influence of environmental aspects upon the reliability of motor drive systems: Evaluation based on fuzzy rulesFrederico A. L. Souza, Helder de Paula, Anderson V. Rocha. 1-8 [doi]
- A distribution grid tied multifunctional SPV system operating with control approach based on decoupled adaptive neural networkChinmay Jain, Sagar Goel, Bhim Singh, Kamal Al-Haddad, Ambrish Chandra. 1-8 [doi]
- Power quality achievement using grid connected converter of wind turbine systemAbdullah Saad Bubshait, Marcelo Godoy Simões, Ali Mortezaei, Tiago Davi Curi Busarello. 1-8 [doi]
- Multifunctional control strategy for asymmetrical cascaded H-Bridge Inverter in microgrid applicationsAli Mortezaei, Marcelo Godoy Simões, A. S. Bu Bshait, T. D. Curi Busarello, Fernando Pinhabel Marafao, Ahmed Al-Durra. 1-8 [doi]
- Effects of the presence of grounded shield in the proximity of high-voltage corona electrodes collection platesAbdeldjalil Reguig, Ahmed Bouteffaha, Hanane Boudra, Abdelber Bendaoud, Amar Tilmatine, Lucien Dascalescu. 1-6 [doi]
- Sorting of finely-grinded granular mixtures using a belt-type corona-electrostatic separatorSara Messal, Thami Zeghloul, Abdelkader Mekhalef, Lucian Dascalescu. 1-5 [doi]
- Motion and mixing of a viscous droplet located on a super-hydrophobic surface using resonant vibration under the vertical and horizontal Ac fieldTakaki Oh-uchi, Toshiyuki Sugimoto, Yoshio Higashiyama. 1-6 [doi]
- A comparative study of conventional and high-efficiency induction machines using finite-element analysis and equivalent-circuit analysisLi Wang, Erh-Lung Chuang, Anton V. Prokhorov. 1-8 [doi]
- Stratification-based wind power forecasting in a high penetration wind power system using a hybrid model with charged system search algorithmYuan-Kang Wu, Po-En Su, Jing-Shan Hong. 1-9 [doi]
- Stabilized suspension control strategy at failure of a motor section in a d-q axis current control bearingless motorMasahide Ooshima, Ayumu Kobayashi, Takayoshi Narita. 1-7 [doi]
- Optimal deployment of distributed generation using a reliability criterionJoydeep Mitra, Mallikarjuna R. Vallem, Chanan Singh. 1-9 [doi]
- A harmonic power flow program aimed at analyzing distortion effects caused by industrial customersGonzalo Constante-Flores, Gabriela Cabrera-Celi, Franklin L. Quilumba, Jesus Jativa-Ibarra, Wei Jen Lee. 1-8 [doi]
- Hybrid simulation of power quality assessment an application for power ground grid in arc furnace systemsE. A. Cano-Plata, G. Jimenez-Lozano, O. J. Soto-Marin, A. J. Ustariz-Farfan, J. A. Ocampo-Wilches, M. C. Cortes, J. H. Estrada. 1-5 [doi]
- Recovery of water bottles plastic using tribo-electrostatic separation processRabah Ouiddir, Amar Tilmatine, Abdelber Bendaoud, Mohammed El-Mouloud Zelmat, Karim Medles, Lucien Dascalescu. 1-5 [doi]
- Intercell busbar design for copper electrowiningEduardo P. Wiechmann, Anibal S. Morales, Pablo Aqueveque, Esteban J. Pino, Luis G. Munoz, Jorge A. Henriquez. 1-7 [doi]
- A decentralized model predictive control for multiple distributed generators in the islanded mode of operationA. Tavakoli, Michael Negnevitsky, Kashem M. Muttaqi. 1-8 [doi]
- Flow distribution control in meso scale via electrohydrodynamic conduction pumpingLei Yang, Kliment S. Minchev, Michal Talmor, Cheng Jiang, Brandon C. Shaw, Jamal Seyed-Yagoobi. 1-8 [doi]
- Installation, startup and performance of a static var compensator for an electric arc furnace upgradeSam Morello, Thomas J. Dionise, Thomas L. Mank. 1-9 [doi]
- Modified electronic load controller for constant frequency operation with voltage regulation of small hydro driven single-phase SEIGUjjwal Kumar Kalla, Bhim Singh, Sreenival S. Murthy. 1-8 [doi]
- Electrical model of building structures under ground-fault conditions. Part IIFabio Freschi, Massimo Mitolo, Riccardo Tommasini. 1-6 [doi]
- CO2 concentration using adsorption and nonthermal plasma desorptionMasaaki Okubo, Tomoyuki Kuroki, Keiichiro Yoshida, Hideaki Yamada, Takuya Kuwahara. 1-7 [doi]
- A new method for power system load modeling using a nonlinear system identification estimatorMohsen Ghaffarpour Jahromi, Steven D. Mitchell, Galina Mirzaeva, David Gay. 1-8 [doi]
- Quantitative evaluation of wind turbine faults under variable operational conditionsXiaohang Jin, Yayu Peng, Fangzhou Cheng, Wei Qiao, Liyan Qu. 1-8 [doi]
- Modeling and diagnostic of incipient inter-turn faults for a three phase permanent magnet synchronous motor using wavelet transformNajla Haje Obeid, Thierry Boileau, Babak Nahid-Mobarakeh. 1-8 [doi]
- Performance of energy saving lamps on power quality and luminous properties under voltage decreasing 240V-100VM. Yusrizal, Pascal Dupuis, N. I. Sinisuka, Georges Zissis. 1-8 [doi]
- Economic analysis of battery energy storage systemWilliam B. Ray, Anitha Sarah Subburaj, James A. Schrock, Stephen B. Bayne. 1-7 [doi]
- Generalized stability control for open loop operation of motor drivesJingbo Liu, Thomas A. Nondahl, Peter B. Schmidt, Semyon Royak, Timothy M. Rowan. 1-8 [doi]
- Smart grid topology identification using sparse recoveryMohammad Babakmehr, Marcelo Godoy Simões, Michael B. Wakin, Ahmed Al-Durra, Farnaz Harirchi. 1-8 [doi]
- A new approach to reduce the non-linear characteristics of a stressed power system by using the normal form technique in the control design of the excitation systemHadi Lomei, Danny Sutanto, Kashem M. Muttaqi, Mohsen Assili. 1-6 [doi]
- Stability enhancement of an integrated wind/solar system fed to an SG-based power systemLi Wang 0019, Van Thuyen Ngo, Mi Sa-Nguyen Thi, Dinh-Nhon Truong, Anton V. Prokhorov. 1-7 [doi]
- Value of insulated bus bars in reducing arcing fault duration in low voltage systemsRahul Rajvanshi, Tom Hawkins. 1-5 [doi]
- Equivalent inductance model of double-pole induced excitation synchronous generatorHui Zhong, Lin Zhao. 1-6 [doi]
- Inertia design methods for islanded microgrids having static and rotating energy sourcesNimish Soni, Suryanarayana Doolla, Mukul C. Chandorkar. 1-8 [doi]
- Feasibility investigation of a hybrid on-grid wind photovoltaic retrofitting systemHussein Al-Masri, Mehrdad Ehsani. 1-7 [doi]
- Fast bus protection using IEC 61850Cassandra H. Goff, Ahmed H. Eltom, Haytham Saeed. 1-8 [doi]
- Measuring electrostatic charge by ultrasound impulse excitationKazuya Kikunaga, Takayuki Hoshi. 1-4 [doi]
- Electric and magnetic field monitoring for power line diagnosticsMaciej A. Noras. 1-5 [doi]
- Optimal energy management in an industrial plant using on-site generation and demand schedulingMoein Choobineh, Salman Mohagheghi. 1-8 [doi]
- Dynamic characterization and modeling of organic light-emitting diodes (OLEDs)Vitor C. Bender, Norton D. Barth, Marina Camponogara, Rafael A. Pinto, Tiago B. Marchesan, J. Marcos Alonso. 1-8 [doi]
- Finite element analysis of a variable inductor for an RSCC based LED lamp driverMarina S. Perdigão, S. F. Ferreira, M. Martins, A. S. Mendes, J. Marcos Alonso. 1-8 [doi]
- Trip curves and ride-through evaluation for power electronics devices in power system dynamic studiesXiaodong Liang, John Hofman. 1-8 [doi]
- New shunt calorimeter for testing electric motorsLassi Aarniovuori, W. Cao, H. Chen, N. Yang. 1-8 [doi]
- On-line estimation of lithium polymer batteries state-of-charge using particle filter based data fusion with multi-models approachDaming Zhou, Alexandre Ravey, Fei Gao, Abdellatif Miraoui, Ke Zhang. 1-8 [doi]
- Operation and impact of energy storage system in an industrial microgridAbrez Mondal, Ajit A. Renjit, Mahesh S. Illindala, Joseph H. Eto. 1-7 [doi]
- KNX protocol compliant load shifting and storage control in residential buildingsLuigi Martirano, Roberto Marrocco, Francesco Liberati, Alessandro Di Giorgio. 1-6 [doi]
- Electrostatic precipitation of diesel PM at reduced gas temperatureMitsuhiro Takasaki, Hirofumi Kurita, Toma Kubota, Kazunori Takashima, Masahiro Hayashi, Akira Mizuno. 1-4 [doi]
- A characterization framework to optimize LED luminaire's luminous efficacyAngel Barroso, Pascal Dupuis, Corinne Alonso, Bruno Jammes, Lionel Seguier, Georges Zissis. 1-8 [doi]
- Online characterization of interharmonics and harmonics of AC electric arc furnaces by multiple synchronous reference frame analysisEda Uz-Logoglu, Özgül Salor, Muammer Ermis. 1-11 [doi]
- Ozone emission and electrical characteristics of ionizers with different electrode materials, numbers, and diametersHak Joon Kim, Bangwoo Han, Chang-Gyu Woo, Yong Jin Kim, Seong-Jin Park, Jong-Pil Yoon. 1-5 [doi]
- Modeling of the media-supply of gas burners of an industrial furnaceChristoph Fröhlich, Stephan Strommer, Andreas Steinböck, Martin Niederer, Andreas Kugi. 1-9 [doi]
- Analysis of voltage sag severity case study in an industrial circuitS. Arias-Guzman, O. A. Ruiz-Guzman, L. F. Garcia-Arias, M. Jaramillo-Gonzales, P. D. Cardona-Orozco, A. J. Ustariz-Farfan, E. A. Cano-Plata, A. F. Salazar-Jimenez. 1-6 [doi]
- Pilot-bus-centered automatic voltage control with high penetration level of wind generationWei Yan, Wei Cui, Wei Jen Lee, Juan Yu, Xia Zhao. 1-8 [doi]
- Design and implementation of a hybrid system for the mitigation of PQ problems of medium-frequency induction steel-melting furnacesIlker Yilmaz, Emre Durna, Muammer Ermis. 1-14 [doi]
- Corona-assisted plate-type electrostatic separation process for granular plastic wastesThami Zeghloul, Lucian Dascalescu, Seddik Touhami, Mohamed Miloudi, Omar Dahou, Gontran Richard. 1-6 [doi]
- Decoupled load sharing of multiple distributed generators in DC microgridsNanfang Yang, Damien Paire, Fei Gao, Abdellatif Miraoui, Weiguo Liu. 1-8 [doi]
- Energy storage systems for high power applicationsMustafa Farhadi, Osama A. Mohammed. 1-7 [doi]
- Non-interruptible energy transfer algorithm applied to multi-terminal VSC-HVDC with modular multilevel converterGumTae Son, HyunWoo Lee, Donghee Choi, Jung-Wook Park. 1-8 [doi]
- Distributed generation system's impact on power qualityUthane Supatti, Sarayuth Wetchakama. 1-9 [doi]
- Testing microprocessor-based numerical transformer differential protectionQuintin Verzosa, Wah A. Lee Alex. 1-9 [doi]
- Very short-term prediction of wind farm power: An advanced hybrid intelligent approachRamya M. Peri, Paras Mandal, Ashraf Ul Haque, Bill Tseng. 1-8 [doi]
- Battery and wind system in weak/strong grid analysisAnitha Sarah Subburaj, Stephen B. Bayne. 1-6 [doi]
- Determining the reactive power from the active power in single phase systems using the extended newton-phaselet methodS. A. Saleh. 1-10 [doi]
- Coupled inductor based high gain current-fed DC-DC bridge convertersSoumya Shubhra Nag, Santanu Mishra. 1-6 [doi]
- Payload estimation in AC electric mining shovels using drive signalsG. Matias Valenzuela, M. Anibal Valenzuela. 1-10 [doi]
- Factors that impact the accuracy of clustering based load forecastingXin Wang, Wei Jen Lee, Heng Huang, Robert Louis Szabados, David Yanshi Wang, Peter Van Olinda. 1-6 [doi]
- Hybrid energy function based real-time optimal wide-area transient stability controller for power system stabilityReza Yousefian, Amirreza Sahami, Sukumar Kamalasadan. 1-8 [doi]
- A modified relevance vector machine for PEM fuel cell stack aging predictionYiming Wu, Elena Breaz, Fei Gao, Abdellatif Miraoui. 1-8 [doi]
- Fuel cell based hybrid power generation strategies for microgrid applicationsUdupi R. Prasanna, Kaushik Rajashekara. 1-7 [doi]
- Electric field driven addressing of oil in water droplets in the presence of gradients of ionic and nonionic surfactantsJakub Tucek, Pavel Beranek, Lucie Vobecka, Zdenek Slouka, Michal Pribyl. 1-7 [doi]
- Low profile LED off-line phase-cut dimming ballast with piezoelectric transformerLi Le, Yujia Yang, Matthias Radecker. 1-4 [doi]
- 3D FEM thermal and electrical analysis of copper electrowining intercell barsEduardo P. Wiechmann, Anibal S. Morales, Pablo Aqueveque, Jorge A. Henriquez, Luis G. Munoz. 1-7 [doi]
- Optimization of data center battery storage investments for microgrid cost savings, emissions reduction, and reliability enhancementChristopher C. Thompson, Konstantinos Oikonomou, Amir H. Etemadi, Volker J. Sorger. 1-7 [doi]
- From Virtual Power Plant (VPP) to Sustainable Energy Microsystem (SEM): An opportunity for buildings energy managementMorris Brenna, Maria Carmen Falvo, Federica Foiadelli, Luigi Martirano, D. Poli. 1-8 [doi]
- Determining optimal energy storage size to mitigate intra-hour wind power variabilityYichuan Niu, Surya Santoso. 1-6 [doi]
- Robust estimation and protection of locked charge in grinding millsP. Pablo Castro, M. Anibal Valenzuela. 1-11 [doi]
- The effect of water droplets and salinity on the offshore wind turbines windings insulation: A short reviewChristina-P. Malliou, Athanasios Karlis, Michael G. Danikas, Blake Lloyd. 1-7 [doi]
- On the employment of 1φ, voltage-source, switch-mode PWM, DC-AC converters for supplying dielectric barrier discharge devicesS. A. Saleh, B. Allen, R. Meng, T. Lavigne, B. G. Colpitts. 1-9 [doi]
- Harmonic injection based adaptive control of IPM motor drive for reduced motor current harmonicsGarin M. Schoonhoven, M. Nasir Uddin. 1-8 [doi]
- Employing DC transmission in long distance AC motor drives: Analysis of the copper economy and power losses reduction in mining facilitiesVinicius Cardoso de Paula, Helder de Paula. 1-7 [doi]
- Enlargement of continuous perceived depth region in Depth-fused 3D displayShiro Suyama, Hirotsugu Yamamoto. 1-5 [doi]
- Stability improvement of a large-scale offshore wind farm using a superconducting magnetic energy-storage unit and a superconducting fault-current limiterLi Wang, Si-Yang Lien, Anton V. Prokhorov. 1-7 [doi]
- Impact of shunt active harmonic filter on harmonic current distortion of voltage source inverter-fed drivesWei-Hsiang Ko, Jyh-Cherng Gu. 1-7 [doi]
- Influence of driving current on photometric performances of a white light OLEDYang Liu, Yuming Chen, David Buso, Georges Zissis. 1-6 [doi]
- Self-organizing recurrent fuzzy wavelet neural network-based mixed H2/H∞ adaptive tracking control for uncertain two-axis motion control systemFayez F. M. El-Sousy, Khaled A. Abuhasel. 1-14 [doi]
- Probabilistic wind generation forecast based on sparse Bayesian classification and Dempster-Shafer theoryMing Yang, You Lin, Xueshan Han. 1-7 [doi]
- A universal-phase rectifier architecture for rural telecom exchanges in developing countriesAbhishek Maji, Soumya Shubhra Nag, Santanu Mishra. 1-8 [doi]
- Performance evaluation of the ZIP model-phaselet frame approach for identifying appliances in residential loadsP. Pijnenburg, S. A. Saleh, P. R. McGaw. 1-14 [doi]
- Distributed energy resources placement in distribution networks considering proximity to voltage collapseFranklin L. Quilumba, Gonzalo E. Constante, Jesus A. Jativa, Wei Jen Lee. 1-6 [doi]
- Control and implementation of a standalone solar photo-voltaic hybrid systemJincy Philip, Chinmay Jain, Krishan Kant, Bhim Singh, Sukumar Mishra, Ambrish Chandra, Kamal Al-Haddad. 1-8 [doi]
- Comparative study of cycloconverter based double-ended isolated microinverter topologies for solar photovoltaic AC (SPVAC) moduleRavi K. Surapaneni, Dorai B. Yelaverthi, Akshay K. Rathore, Hua Geng. 1-8 [doi]
- Photoelectrochemical characterization of titania photoanodes fabricated using varying anodization parametersRajesh Sharma, Keith Arnoult, Kevin Hart, Maqsood Mughal, Robert Engelken. 1-7 [doi]
- Soft constrained finite horizon model predictive controlM. Askaria, Mahmoud Moghavvemi, Haider A. F. Almurib, Ahmed Haidar. 1-8 [doi]
- Effects on the results of the fall of potential test when using sky wires for the remote current probeEduardo H. Enrique. 1-6 [doi]
- A review on switched capacitor converters with high power density for OLED lamp drivingGilberto Martinez, J. Marcos Alonso. 1-8 [doi]
- Correlation between multiple electric arc furnace operations and unscheduled power flows in the interconnection lines at the eastern cross border of ENTSO-EErinc Altintas, Özgül Salor, U. Buyukdagli, Isik Çadirci, Muammer Ermis. 1-8 [doi]
- Distributed energy resource planning for microgrids in the united statesChen Yuan, Mahesh S. Illindala, Mohammed A. Haj-ahmed, Amrit S. Khalsa. 1-9 [doi]
- Rotational energy harvesting to prolong flight duration of quadcoptersRobert Sowah, Moses A. Acquah, Abdul R. Ofoli, Godfrey A. Mills, Koudjo M. Koumadi. 1-7 [doi]
- Performance investigation of high-energy high-power densities storage devices by li-ion battery and supercapacitor for fuel cell/photovoltaic hybrid power plant for autonomous system applicationsPhatiphat Thounthong, S. Sikkabut, P. Mungporn, C. Ekkaravarodome, N. Bizon, P. Tricoli, Babak Nahid-Mobarakeh, Serge Pierfederici, Bernard Davat. 1-10 [doi]
- Medium frequency signal propagation characteristics of a lifeline as a transmission line in underground coal minesJingcheng Li, Miguel A. Reyes, Nicholas W. Damiano, Bruce G. Whisner, Rudy J. Matetic. 1-7 [doi]
- Integrated mechanical and electrical non-salient pole PMSG-based wind turbine model development with predictive direct torque controlShih-yu Yang, Yuan-Kang Wu, Huei-Jeng Lin, Wei Jen Lee. 1-8 [doi]
- Design and implementation of voltage source converter excitation system to improve power system stabilityZhu Chen, Jiming Lu, Chengxiong Mao, Yuhao Zhou, Dan Wang. 1-10 [doi]
- Comprehensive protection strategy for an islanded microgrid using intelligent relaysKexing Lai, Mahesh S. Illindala, Mohammed A. Haj-ahmed. 1-11 [doi]
- A study of electrodeless fluorescent lamp's cores of ferrite N87 and IP12ENatalia B. Chagas, Veridiane Rosa, Marcelo Freitas da Silva, Ricardo Nederson do Prado. 1-6 [doi]
- Static elimination performance of a corona ionizer in nitrogen-based electronegative gasesDaisuke Nemoto, Naoyuki Sato, Wanting He, Takashi Ikehata, Takeshi Matsuo, Kazuo Okano. 1-5 [doi]
- Modeling, control and modulation strategy of a three-phase four-switch PWM voltage-source rectifier based on novel non-orthogonal coordinateZhiyong Zeng, Chong Zhu, Qingwei Yuan, Weiyi Zheng, Rongxiang Zhao. 1-10 [doi]
- Retrofit LED lamps: Photometric flicker analysisLeos Kukacka, Pascal Dupuis, Georges Zissis, Milan Kolar. 1-5 [doi]
- Test bench model and algorithms for multi-sources light electric vehicle energy management systemM. A. Hannan, F. A. Azidin, A. Mohamed, M. N. Uddin. 1-8 [doi]
- Online unbalanced rotor fault detection of an IM drive based on both time and frequency domain analysesMd. Mizanur Rahman, M. Nasir Uddin. 1-8 [doi]
- A new hybrid surface-volume dielectric barrier discharge reactor for ozone generationKamel Nassour, Mostefa Brahami, Said Nemmich, Nacera Hammadi, Amar Tilmatine, Noureddine Zouzou. 1-7 [doi]
- A reinforcement learning algorithm based technique for thermal energy management of a PEM fuel cell power plantSuparna Chowdhury, M. Y. El-Sharkh. 1-8 [doi]
- An electrostatic sheet stapler using positive and negative corona chargingT. Sugimoto, K. Ozawa, Y. Higashiyama. 1-5 [doi]
- A linear program for system level control of regional PHEV charging stationsAsama Kulvanitchaiyanunt, Victoria C. P. Chen, Jay M. Rosenberger, Piampoom Sarikprueck, Wei Jen Lee. 1-8 [doi]
- Bidirectional hybrid batteries/ultra-capacitors energy storage system for vehicular applicationsUthane Supatti, Sarawut Sungtum. 1-6 [doi]
- Experimental performance of the phase-based digital protection against arc flash faultsS. A. Saleh, A. S. Aljankawey, Rachid Errouissi, M. A. Rahman. 1-10 [doi]
- A new model of electromechanical relays for predicting the motion and electromagnetic dynamicsEdgar Ramirez-Laboreo, Carlos Sagüés, Sergio Llorente. 1-8 [doi]
- A unified switching strategy in bidirectional grid interface DCM flyback stages for public street lighting systems with microgeneration capabilityPablo J. Quintana, Jorge García, Jesús Cardesín Miranda, Emilio L. Corominas. 1-6 [doi]
- Antenna arrangement investigation for through-the-earth (TTE) communications in coal minesLincan Yan, Carl Sunderman, Bruce G. Whisner, Nicholas W. Damiano, Chenming Zhou. 1-6 [doi]
- A bi-level program for the planning of an islanded microgrid including CAESJun Zhang, Kejun Li, Mingqiang Wang, Wei Jen Lee, Hongxia Gao. 1-8 [doi]
- An optimal storage management algorithm for PV capacity firming based on weather patternsSherif A. Abdelrazek, Sukumar Kamalasadan. 1-8 [doi]
- Autonomy and user experience enhancement control of an electrically assisted bicycle with dual-wheel driveMichael Guarisco, Fei Gao, Damien Paire. 1-8 [doi]
- Developing and testing phaselet frames-based digital protection for distributed generation unitsS. A. Saleh, E. Ozkop, A. S. Aljankawey. 1-13 [doi]
- Optimal pulsewidth modulation of medium-voltage modular multilevel converterAmarendra Edpuganti, Akshay Kumar Rathore. 1-8 [doi]
- Simulation and measurement of medium frequency signals coupling from a line to a loop antennaNicholas W. Damiano, Jingcheng Li, Chenming Zhou, Donovan E. Brocker, Yifeng Qin, Douglas H. Werner, Pingjuan L. Werner. 1-6 [doi]
- Water purification using a packed bed reactorYudai Takeda, Hirofumi Kurita, Yuki Taino, Kazunori Takashima, Hachiro Yasuda, Akira Mizuno. 1-6 [doi]
- A method of 20 kV cable line fault location based on sheath grounding currentFaan Guo, Guofang Zhu, Xiaofeng Dong. 1-5 [doi]
- Protection coordination analysis under a real-time architecture for industrial distribution systems based on the Std IEEE 242-2001Juan Diego Pico, David Celeita, Gustavo Ramos. 1-6 [doi]
- On the application of single-phase voltage sag compensators in three-phase systemsIgor A. Pires, Felipe Dias de Oliveira, Sidelmo M. Silva, Braz de Jesus Cardoso Filho. 1-7 [doi]
- Economic and technical evaluation of solar assisted water pump stations for mining applications: A case of studyMario Montorfano, Daniel Sbarbaro, Luis Moran. 1-5 [doi]
- Phase-to-phase communication scheme for downhole monitoring tool design in electrical submersible pump systemsOmid Ghoreishi, Xiaodong Liang, Wilsun Xu. 1-13 [doi]
- Toward intelligent fault classification in autonomous microgridsShankar Abhinav, Giulio Binetti, Frank L. Lewis, Ali Davoudi. 1-8 [doi]
- An electrical impact study between variable speed dual pinion mills and gearless mill drivesMazyar Laylabadi, Athol Symonds. 1-9 [doi]
- Optimizing LED lamps design for street lighting with staggered arrangement allowing energy saving strategies in a Lighting Smart Grid contextDaniel Garcia-Llera, Calleja Rodriguez, Antonio Javier, Nelo Huerta-Medina, Manuel Rico-Secades, Emilio López Corominas, Pablo Quintana Barcia. 1-8 [doi]
- Defining the industrial demilitarized zone and its benefits for mining applicationsDavid C. Mazur, Rob A. Entzminger, Pete A. Morell, John A. Kay, Erik Syme. 1-7 [doi]
- Dynamic estimation of electrical demand in hot rolling millsGonzalo Alonso Orcajo, D. Josue Rodriguez, José M. Cano, Joaquín G. Norniella, G. Pablo Ardura, T. Rocio Llera, R. Diego Cifrian. 1-9 [doi]
- Enhanced frequency response strategy for PMSG based wind energy conversion system using ultracapacitor in remote area power supply systemsYingjie Tan, Kashem M. Muttaqi. 1-8 [doi]
- Self-oscillating series-resonant led driver applied to reduce low-frequency current ripple transmissionMaicol F. de Melo, W. D. Vizzotto, M. F. Menke, Marco A. Dalla Costa, Alysson R. Seidel, J. Marcos Alonso. 1-7 [doi]
- A new displaying technology for information hiding using temporally brightness modulated patternHiroshi Unno, Kazutake Uehira. 1-4 [doi]
- Improving power quality in mining industries with a three-level active front endAlex-Sander Amavel Luiz, Braz de Jesus Cardoso Filho. 1-9 [doi]
- Collection of ultrafine particles using polypropylene non-woven filter media charged by triode corona dischargeAli Fatihou, Noureddine Zouzou, Lucien Dascalescu. 1-5 [doi]
- Determination of radiative properties for water-wall plasma arc lamp modellingYann Cressault, Francis P. Dawson, Dave M. Camm, Markus Lieberer, Harpreet Singh Grover. 1-9 [doi]
- Adaptive harmonic cancellation scheme for voltage and frequency control of a single-phase two-winding SEIGUjjwal Kumar Kalla, Bhim Singh, Sreenival S. Murthy, Krishan Kant, Rajasekhara Reddy Chilipi. 1-7 [doi]
- Naturally commutated current-fed three-phase bidirectional soft-switching DC-DC converter with new modulation techniqueSatarupa Bal, Akshay K. Rathore, Dipti Srinivasan. 1-8 [doi]
- Why existing utility metrics do not work for industrial reliability analysisRobert Schuerger, Robert Arno Harris, Neal Dowling. 1-5 [doi]
- An active life extension strategy for power switches in interleaved convertersSerkan Dusmez, Syed H. Ali, Bilal Akin. 1-8 [doi]
- Control of doubly fed induction generator in standalone wind energy conversion systemShailendra Sharma, Bhim Singh, Ambrish Chandra, Kamal Al-Haddad. 1-8 [doi]
- A new compensation technique for PMSM torque ripple minimizationA. Houari, François Auger, J. C. Olivier, M. Machmoum. 1-6 [doi]
- Optimum resistive type fault current limiter: An efficient solution to achieve maximum fault ride-through capability of fixed speed wind turbines during symmetrical and asymmetrical grid faultsSeyed Behzad Naderi, Michael Negnevitsky, Amin Jalilian, Mehrdad Tarafdar Hagh, Kashem M. Muttaqi. 1-8 [doi]
- Multi-mega VAR passive filters for mining applications: Practical limitations and technical considerationsLuis Moran, Cristobal Albistur, Rolando Burgos. 1-8 [doi]
- Power distribution in coupled multiple-coil inductors for induction heating appliancesFernando Sanz-Serrano, Carlos Sagüés, Sergio Llorente. 1-8 [doi]
- Electrical Safety Update - OSHA 29 CFR 1910.269 and NFPA 70E®-2015 revisionsDennis K. Neitzel. 1-6 [doi]
- Analysis of star-star-delta_utilized transformer under balanced and unbalanced load conditionsM. V. Athul, Preetha P. K., P. S. Chandramohanan Nair. 1-6 [doi]
- Bidirectional OLED buck driverRay-Lee Lin, Jhong-Yan Tsai, David Buso, Georges Zissis. 1-10 [doi]
- A simplified mathematical approach to model and analyze magnet defects fault signatures in permanent magnet synchronous motorsMohsen Zafarani, Taner Goktas, Bilal Akin. 1-6 [doi]
- Static elimination in VacuumTakashi Ikehata, Daisuke Nemoto, Wanting He, Takeshi Matsuo, Naoyuki Sato, Kazuo Okano. 1-5 [doi]
- Comparative analysis of segmental rotor type switched reluctance motors with single teeth windingZhenyao Xu, Dong-Hee Lee, Jin Woo Ahn. 1-8 [doi]
- True unit power factor active front end for high capacity belt conveyor systemsThiago M. Parreiras, Anderson V. Rocha, Julio C. G. Justino, Braz de Jesus Cardoso Filho. 1-9 [doi]
- A profile measurement system for rail manufacturing using multiple laser range findersJulio Molleda, Rubén Usamentiaga, Alvaro F. Millara, Daniel F. García, Pedro Manso, Carlos M. Suarez, Ignacio Garcia. 1-8 [doi]
- Intelligent volt/VAR control algorithm for active power distribution system to maximize the energy savingsRahul Anilkumar, Griet Devriese, Anurag K. Srivastava. 1-8 [doi]
- District heating safety issues: Interactions between grounding systems and thermal installationsGiulio Cerino, Fabio Freschi, Massimo Mitolo, Alberto Poggio, Michele Tartaglia. 1-6 [doi]
- Measurement methods for flow electrification in the context of a tank being filled with a dielectric liquidPaul D. S. Clermont, Yohann Duval, Thierry Paillat, Gérard Touchard, Gilles Peres, Jean Rivenc. 1-6 [doi]
- The effect of available short circuit capacity and trail cable length on substation voltage amplification in surface excavation industryOmar J. Abdel-baqi, Michael G. Onsager, Peter J. Miller. 1-8 [doi]
- The TN-island system for cold ironingGiuseppe Parise, Luigi Parise, P. B. Chavdarian, Stefano Sabatini, Chun-Lien Su. 1-6 [doi]
- A single-stage single-switch LED driver based on integrated buck-boost circuit and Class E converterYijie Wang, Jiaoping Huang, Wei Wang, Dianguo Xu. 1-5 [doi]
- An optimized algorithm for SVPWM based on three-phase stationary frameWeiyi Zheng, Chong Zhu, Zhiyong Zeng, Qingwei Yuan, Huan Yang, Rongxiang Zhao. 1-7 [doi]
- Performance comparison between Dual-Blinder and Phasor-Based Out-of-Step detection functions using hardware-in-the loop simulationMustafa A. Saad, Ahmed H. Eltom, Gary L. Kobet, Raga Ahmed. 1-8 [doi]
- Space vector modeling of a SAG mill drive and evaluation during mill shutdownsP. Pablo Castro, M. Anibal Valenzuela. 1-12 [doi]
- A single sensor based bridgeless landsman PFC converter fed BLDC motor drivePraveen Kumar Singh, Bhim Singh, Vashist Bist, Ambrish Chandra, Kamal Al-Haddad. 1-8 [doi]
- Premises of evaluation of the filtration efficiency of an electrostatic precipitator by measuring of the electric chargeMalika Bengrit, Farid Miloua, Mohamed Miloudi, Amar Tilmatine, Lucian Dascalescu, Noureddine Zouzou. 1-5 [doi]
- Adaptive disturbance rejection control scheme for DFIG-based wind turbineAkbar Tohidi, Hadi Hajieghrary, M. Ani Hsieh. 1-8 [doi]
- Application of nanosecond pulsed dielectric barrier discharge for sooty surface regenerationNoureddine Zouzou, Arthur Claude Aba'a Ndong, Eric Moreau. 1-6 [doi]
- Wind and solar farms underground cables ampacity when lining materials are used in trenchesEduardo H. Enrique, Andrew Rees, Sean Freihaut. 1-8 [doi]
- Designing smart inverter with unified controller and smooth transition between grid-connected and islanding modes for microgrid applicationFarnaz Harirchi, Marcelo Godoy Simões, Mohammad Babakmehr, Ahmed Al-Durra, S. M. Muyeen. 1-7 [doi]
- On the design robustness and long term performance of the most used electrodes in the copper electrowining industryEduardo P. Wiechmann, Anibal S. Morales, Pablo Aqueveque, Esteban J. Pino, Leonardo G. Aburto. 1-8 [doi]
- Removal of high concentration of nitrous oxide for anesthetic gas using nonthermal plasma combined with adsorbentTomoyuki Kuroki, Toshiaki Yamamoto, Shunsuke Nishii, Masayuki Akita, Masaaki Okubo. 1-6 [doi]
- Characterization and analysis of electric-field sensorsSean M. Heintzelman, David M. Hull. 1-8 [doi]
- Oxide thin-film transistor technology for flexible organic light-emitting diode displaysMitsuru Nakata, Hiroshi Tsuji, Yoshihide Fujisaki, Yoshiki Nakajima, Tatsuya Takei, Genichi Motomura, Hirohiko Fukagawa, Toshimitsu Tsuzuki, Takahisa Shimizu, Naoki Shimidzu, Toshihiro Yamamoto. 1-5 [doi]
- Experimental investigation of a new-electrostatic separation process for micronized plasticsMohammed El-Mouloud Zelmat, Rabah Ouiddir, Amar Tilmatine, Adel Benabboun, Abdelber Bendaoud, Karim Medles, Lucien Dascalescu. 1-5 [doi]
- Feature extraction based hellinger distance algorithm for non-intrusive aging load identification in residential buildingsHsueh-Hsien Chang, Meng-Chien Lee, Nanming Chen, Chao-Lin Chien, Wei Jen Lee. 1-8 [doi]
- Predictive torque control with zero-sequence current suppression for open-end winding induction machineBohang Zhu, Kaushik Rajashekara, Hajime Kubo. 1-7 [doi]
- Integrating the first HVDC-based offshore wind power into PJM system - A real project case studyJeremy Lin. 1-8 [doi]
- Control of hybrid AC/DC microgrid involving energy storage, renewable energy and pulsed loadsTan Ma, Mehmet Hazar Cintuglu, Osama A. Mohammed. 1-8 [doi]
- Improved efficiency determination for a PLL-controlled series resonant inverter for induction metal surface hardeningB. Meziane, H. Zeroug. 1-8 [doi]
- State estimation based determination of harmonic current contributions of iron and steel plants supplied from PCCErhan Sezgin, Murat Göl, Özgül Salor. 1-10 [doi]