Table of Contents

• Determining the Optimal Orientation of AM-Parts Based on Native 3D CAD DataSlim Krückemeier, Georg Staudter, Reiner Anderl. 3-9 [doi]
• Node-Based Shape Optimization and Mechanical Test Validation of Complex Metal Components and Support Structures, Manufactured by Laser Powder Bed FusionAditya Ghantasala, Johannes Diller, Armin Geiser, David Wenzler, Dorina Siebert, Christina Radlbeck, Roland Wüchner, Martin Mensinger, Kai-Uwe Bletzinger. 10-17 [doi]
• A Semi-skilled Fabrication Approach of Shape-Changing Interfaces through Fused Filament FabricationRobin Vandormael, Kamie Leten, Marieke Van Camp, Jouke Verlinden, Regan Watts. 18-26 [doi]
• Printing Small: Measuring the Resolution Limits of CLIP TechnologyAddis Tessema, Justin Mecham, Kimon Iliadis, Sue J. Mecham, Robert Pinschmidt, Joseph M. DeSimone. 27-34 [doi]
• Development of an Elastic Inflatable Actuator for Active Seating SystemsPeter Gust, Sebastian Kampa, Marco Kuhlmeier, Christian Sauder, Alina Sersch. 35-42 [doi]
• Reusable Kit for 3D Printable Sustainable CutleryMassimo Di Nicolantonio, Emilio Rossi, Antonello Vespoli, Giovanni Annese. 45-52 [doi]
• A Systematic Review of Differences Between Conventional Orthoses and 3D-Printed OrthosesAna Cláudia Tavares Rodrigues, Letícia Vasconcelos Morais Garcez, Fausto Orsi Medola, Luciana Ramos Baleotti, Frode Eika Sandnes, Atiyeh Vaezipour. 53-60 [doi]
• Product Design and Development by Additive Manufacturing for Automotive SystemsÁlvaro M. Sampaio, António J. Pontes. 61-67 [doi]
• 3D Printing and Social Inclusion: A Design Research FrameworkEmilio Rossi, Massimo Di Nicolantonio, Alessio D'Onofrio. 68-73 [doi]
• Design of Custom Breast Prosthesis for Additive Manufacturing ProductionCarlos G. Helguero, Jorge L. Amaya, Fausto Maldonado, Jocelyne A. Acosta, Maria Bravo, Junior Garzón. 74-81 [doi]
• Increasing Agility: A Tangible XR for Rapid Prototype Development, Design Exploration and Usability AssessmentRonald Meyer, Michael Preutenborbeck, Marcel Usai, Kristof Briele, André Witzel, Frank Ole Flemisch. 85-91 [doi]
• Applying Packing Problems to Optimize Throughput Time and Human Ergonomics in Project ShopsThomas Henke, Jochen Deuse. 92-99 [doi]
• Organizational Risk in Custom Manufacturing of Complex ProductsAnna K. Stasiuk-Piekarska, Magdalena K. Wyrwicka. 100-107 [doi]
• Reduction of Human Effort in Technical Cleanliness Inspection Through Advanced Image Processing ApproachesThorben Panusch, Roman Möhle, Ronny Zwinkau, Jochen Deuse. 108-115 [doi]
• Method for the Targeted Selection and Installation of an IoT - PlatformStefan Kugler, Cordula Czwick, Hoang Phuong Linh Nguyen, Reiner Anderl. 116-123 [doi]
• Predictive Model of Rock Fragmentation Using the Neuro-Fuzzy Inference System (ANFIS) and Particle Swarm Optimization (PSO) to Estimate Fragmentation Size in Open Pit MiningBetty Vergara, Maria Torres, Vidal Aramburu, Carlos Raymundo. 124-131 [doi]
• Managing the Team by Individualization. How Can Artificial Intelligence Help to Manage a Team Effectively and Increase Its Efficiency?Ewa Jochheim, Maciej Orzechowski, Pawel Nowodzinski. 132-139 [doi]
• Sill Panel Corrosion in Automotive IndustryDina Diga, Irina Severin. 140-147 [doi]
• Improved Sulfuric Acid Discharge Through Combined Task and Risk AnalysisJefferson dos Santos Mascarenhas, Igor Santos Araujo, Salvador Ávila Filho, Danillo Ramos Camargo, Leila Maria Aguilera Campos, Luiz Antônio Magalhães Pontes. 148-158 [doi]
• Tacit Knowledge Awareness and Sharing as a Focal Part of Knowledge Production. Polish-US View on IT, Healthcare, and Construction IndustryWioleta Kucharska. 159-167 [doi]
• Evaluation Method in Multiple Scenarios by Means of Datamine Applying the Law of Variable Cutting in Optimization of the NPV in Open PitElmer Flores-Zuniga, Diego Rivera-Ascencios, Edgar Alayo-Leon, Vidal Aramburu-Rojas, Carlos Raymundo. 168-175 [doi]
• Sustainment Method in Gold-Bearing Workings Using Woodpacks to Mitigate the Induced Stresses that Cause Instability in an Underground Mine that Uses Longwall ExploitationCarlos Saldaña-Paredes, Humberto Pehovaz-Alvarez, Carlos Raymundo. 176-183 [doi]
• Operational Reliability Investigation of Turbogenerator Based on Technological Aspects and Human FactorsIgor Santos Araujo, Salvador Ávila Filho, Jefferson dos Santos Mascarenhas, Danillo Ramos Camargo. 184-191 [doi]
• Stability Method for Pit Dimensioning Obtained Using the Gradient Boosting Machine Algorithm in Underground MiningHernan Camacho, Humberto Pehovaz-Alvarez, Carlos Raymundo. 192-199 [doi]
• Expanded Polystyrene Wall and Conventional Concrete Wall Sustainability Issues in HousingLateef Adewole Adegboyega, Rita Yi Man Li. 200-207 [doi]
• Impact of Globalization on Current Practices in the Supply Chain Management of SMEsAyodeji Dennis Adeitan, Clinton Aigbavboa, Oyindamola Cynthia Olubiyo. 208-214 [doi]
• Achieving the Success of Sustainability Systemic Design Through Data Visualization ApproachYing Chuai, Haiwei Yan. 215-222 [doi]
• An Assessment of Supply Chain Resilience in Catastrophic Events: A Case of South AfricaOhiomah Ifije, Nita Sukdeo, Clinton Aigbavboa. 223-230 [doi]
• Influence of Effective and New Information Flow on Logistics ManagementAyodeji Dennis Adeitan, Clinton Aigbavboa, Adedamola Donald Adeitan, Adebayo Oluwasegun Adewole. 231-236 [doi]
• Structural Equation Modelling of Resource Commitment Constructs as a Predictor of Implementation of Reverse Supply Chain ManagementOhiomah Ifije, Clinton Aigbavboa, Nita Sukdeo. 237-244 [doi]
• Method of Implementation of Air Chambers Using Recycled Rubber Based on Positioning for the Optimization of Fragmentation in Open-Pit BlastingCristhian Chapoñan-Chinchay, Jhonatan Diaz-Cueto, Vidal Aramburu-Rojas, Yaneth Vasquez-Olivera, Carlos Raymundo. 245-253 [doi]
• Shotcrete Elaboration Method Using Geopolymer Cement Product of the Alkaline Activation of Tailings for the Support of Underground Work in Polymetallic Mines of PeruJhoseph La-Fuente, Saac Huacho, Humberto Pehovaz-Alvarez, Carlos Raymundo. 254-262 [doi]
• An Empirical Review and Implication of Globalization to the South African Automotive IndustryJohn M. Ikome, O. T. Laseinde, M. G. Kanakana Katumba. 263-270 [doi]
• An Assessment of Logistics and Transport Subdivision as an Element of GlobalizationAyodeji Dennis Adeitan, Clinton Aigbavboa. 271-276 [doi]
• Contextualizing Foreign Investments in the Nigerian Construction IndustryMathew Ikuabe, Clinton Aigbavboa, Ayodeji Oke, Douglas Aghimien, Wellington Didibhuku Thwala. 277-286 [doi]
• Business Management Engineers: Profile and Competencies of Generations X, Y and ZRodolfo Martinez-Gutierrez, Carmen Esther Carey-Raygoza, Carlos Hurtado-Sanchez, Beatriz Chavez-Ceja, Artemnio Lara-Chavez. 287-291 [doi]
• Quality Evaluation of Measurement Service in Online Clothing Mass Customization ModeXiaoli Yu, Zhenzhen Huang. 292-299 [doi]
• Segmentation and Sequencing in CAx Instructional VideosLorena Niebuhr, Nina Rußkamp, Eva-Maria Jakobs. 303-310 [doi]
• Data-Driven Determination and Plausibility Check of Requirement Profiles in LogisticsMarkus Kohl, Sandra Häring, Jens Lopitzsch, Johannes Fottner. 311-319 [doi]
• Robotic Process Automation in Industrial Engineering: Challenges and Future PerspectivesSebastian Schlund, Mathias Schmidt. 320-327 [doi]
• Process Improvement for the Reduction of Rework Applying TPM and Kaizen in a Company in the Metalworking SectorAngel Murga-Vasquez, Jennyfer Valenzuela-Garcia, Percy Castro-Rangel. 328-335 [doi]
• Improvement of the Global Efficiency of Mining Equipment Through Total Productive Maintenance - TPMOrlando Lama, Josue Alayo, Ernesto Aparicio, Cesar Nunura. 336-344 [doi]
• Management System of Intelligent, Autonomous Environment (IAEMS). The Reference ModelEdmund Pawlowski. 345-352 [doi]
• st Century ManufacturersMakinde Oluwafemi Ajayi, Opeyeolu Timothy Laseinde. 353-363 [doi]
• Analyzing the Dynamics of Work Accidents in Manufacturing to Understand "Reasonably Foreseeable Behaviors"Lucia Botti, Riccardo Melloni, Maniva Oliva. 367-375 [doi]
• Human Action Recognition on Exceptional Movement of Worker OperationChao-Lung Yang, Shang-Che Hsu, Yu Wei Hsu, Yu-Chung Kang. 376-383 [doi]
• Motion Analysis at Checking Phase in Automobile Repair PaintingYuka Takai, Shigeru Ikemoto. 384-391 [doi]
• Micro-influencers as an Effective Channel to Reach Customers Using Social Media in the Time of the COVID-19 PandemicMichal Trziszka. 395-400 [doi]
• Correlations Linking Macroergonomic Premises with Key Features of Intelligent BuildingsLeszek Pacholski. 401-408 [doi]
• Management Model Based on the Application of the DEA (Data Envelopment Analysis) and 5s Method to Improve the Efficiency of Production Processes in the Coffee Agronomic SectorFernando Bellido-Arcas, Cesar Ramirez-Valdivia, Carlos Raymundo. 409-416 [doi]
• The Impact of Changes Perceived in the Environment on the Agility of the EnterpriseStefan Trzcielinski. 419-427 [doi]
• The Concept of Management by Objectives and Kaizen Implementation on the Basis on Production Intelligent FacilityJoanna Kalkowska, Hanna Wlodarkiewicz-Klimek. 428-436 [doi]
• Productivity Improvement of a Footwear Manufacturing Company Through Lean ToolsJose Castillo-Castañeda, Brian Tarazona-Lopez, Claudia Leon-Chavarri, Luis Cardenas. 437-445 [doi]
• Warehouse Management Model Under the Lean Warehousing Philosophy to Reduce Product Returns in the MarketerMaría Isidro, Angel Susaya, Gino Viacava, Wilder Namay. 446-454 [doi]
• Process Improvement Model Based on Lean Manufacturing and Plant Distribution to Reduce Production TimesJosue Arias-Castañeda, Ruth Condori-Gonza, Victor Aparicio-Lora, Alejandro Barbachan-Callirgos, Wilder Namay. 455-463 [doi]
• A Lean Manufacturing and RCM-Based Production Process Improvement Model for Increasing the Production Capacities of Carbonated Beverage Bottling CompaniesEsthefani Capcha-Huamali, William Vila-Huaman, Gino Viacava-Campos, Juan Quiroz-Flores, Luis Cardenas. 464-472 [doi]
• Lean Manufacturing Model for Production Management Based on SAP-LAP to Reduce Delays in the Production Line in Mypes of the Metalworking SectorAdeir Leon-Huerta, Leslie Zamora-Huamancha, Ernesto Altamirano-Flores, Carlos Raymundo. 473-481 [doi]