| 131 | -- | 139 | Steffen C. Eickemeyer, Tim Borcherding, Sebastian Schäfer, Peter Nyhuis. Validation of data fusion as a method for forecasting the regeneration workload for complex capital goods |
| 141 | -- | 151 | Marion Merklein, Thomas Svec. Hot stamping: manufacturing functional optimized components |
| 153 | -- | 166 | C. Becker, G. Quintana, Matthias Hermes, B. Cavallini, A. Erman Tekkaya. Prediction of surface roughness due to spinning in the incremental tube forming process |
| 167 | -- | 176 | Bernd-Arno Behrens, Klaus-Georg Kosch. Characterizing the buckling behavior of cylindrical hollow and hybrid specimens by experimental upsetting tests |
| 177 | -- | 184 | Fritz Klocke, Thomas Bergs, Florian Degen, Philipp Ganser. Presentation of a novel cutting technology for precision machining of hardened, rotationally symmetric parts |
| 185 | -- | 193 | Eckart Uhlmann, L. Hochschild. Tool optimization for high speed grinding |
| 195 | -- | 201 | Christian Brecher, Jens Rossaint, Jens Falker. Evaluation of an internally spring preloaded four contact-points bearing for spindle units |
| 203 | -- | 211 | Uwe Heisel, Michael Storchak, Dmitrii Krivoruchko. Thermal effects in orthogonal cutting |
| 213 | -- | 221 | Alexandra Werber, Mathias Liewald, Winfried Nester, Martin Grünbaum, Klaus Wiegand, Jörg Simon, Jürgen Timm, Walter Hotz. Assessment of forming limit stress curves as failure criterion for non-proportional forming processes |
| 223 | -- | 231 | Christian Brecher, Fritz Klocke, Markus Brumm, Ario Hardjosuwito. Simulation based model for tool life prediction in bevel gear cutting |
| 233 | -- | 237 | Zheng Sun, Alexandru Dadalau, Alexander Verl. Component oriented and automatic generation of FE models for parallel kinematics |
| 239 | -- | 249 | Ioannis Tsoupis, Sven Hildering, Marion Merklein. Prediction of damage in small curvature bending processes of high strength steels using continuum damage mechanics model in 3D simulation |
| 251 | -- | 263 | Raphael Holtermann, Sebastian Schumann, Andreas Menzel, Dirk Biermann. Modelling, simulation and experimental investigation of chip formation in internal traverse grinding |
| 265 | -- | 274 | Christian Brecher, Markus Brumm, Florian Hübner, Jannik Henser. Influence of the manufacturing method on the running behavior of beveloid gears |
| 275 | -- | 281 | Bernd-Arno Behrens, Christoph Michael Gaebel. Formability of an anti-fingerprint clear coating on satin stainless steel sheet metal |
| 283 | -- | 289 | C. Eichenseer, I. Wittmann, C. Hartig, G. A. Schneider, N. Schell, W. Hintze. In situ measurement of lattice strains in mixed ceramic cutting tools under thermal and mechanical loads using synchrotron radiation |
| 291 | -- | 297 | Michael Lütjen, Patrick Dittmer, Marius Veigt. Quality driven distribution of intelligent containers in cold chain logistics networks |
| 299 | -- | 308 | Berend Denkena, F. Charlin, M. Merwart. Competence-based process planning for the workshop production |
| 309 | -- | 318 | Christian Brecher, Christian Krella, Florian Lindner. Simulative investigation of point diffraction interferometry with regard to machine tool calibration |
| 319 | -- | 328 | Bernd-Arno Behrens, Lennard Lippold, Julian Knigge. Investigations of the shear behaviour of aluminium alloys |
| 329 | -- | 338 | Christian Brecher, Thomas Breitbach, Christian Ecker, Wolfram Lohse. Environment sensing for the creation of work cell models |
| 339 | -- | 349 | A. Eckert, M. Israel, R. Neugebauer, M. Rössinger, M. Wahl, F. Schulz. Local-global approach using experimental and/or simulated data to predict distortion caused by mechanical joining technologies |