External Links

    Journal: Production Engineering

    Volume 9, Issue 5-6

    563 -- 568Fritz Klocke, Janis Thiermann, Patrick Mattfeld. Influence of the dressing process on grinding wheel wear
    569 -- 576Alexander Kahrimanidis, Daniel Wortberg, Marion Merklein. Approach to minimize the distortion of 6xxx-aluminum tailor heat treated blanks in industrial applications
    577 -- 583Peiran Zhang, Gert Goch. A quality controlled laser-chemical process for micro metal machining
    585 -- 591Peter Groche, Falko Vogler, Lennart Wießner. Examination of tailored preforms produced by rotary swaging for subsequent hydroforming
    593 -- 599Philipp A. Schmidt, Michael F. Zaeh. Laser beam welding of electrical contacts of lithium-ion batteries for electric- and hybrid-electric vehicles
    601 -- 612U. Moos, D. Bähre. Modelling of tool behaviour for long stroke honing of bores
    613 -- 621Marcel Huptych, Sascha Röck. Online path planning in dynamic environments using the curve shortening flow method
    623 -- 634Krzysztof Swidergal, Christian Lubeseder, Ingo von Wurmb, Arnulf Lipp, Josef Meinhardt, Marcus Wagner, Steffen Marburg. Experimental and numerical investigation of blankholder's vibration in a forming tool: a coupled MBS-FEM approach
    635 -- 646Ali Azadeh, Mohammad Sheikhalishahi, A. Aghsami. An integrated FTA-DFMEA approach for reliability analysis and product configuration considering warranty cost
    647 -- 654Steven Peters. A readiness level model for new manufacturing technologies
    655 -- 664Paolo Renna. Workload control policies under continuous order release
    665 -- 673Mohammad Ali Nekooie, Mohammad Sheikhalishahi, Reza Hosnavi. Supplier selection considering strategic and operational risks: a combined qualitative and quantitative approach

    Volume 9, Issue 4

    433 -- 435Dirk Biermann, Ivan Iovkov. Modelling, simulation and compensation of thermal effects for complex machining processes
    437 -- 449Volker Schulze, Eckart Uhlmann, Rolf Mahnken, Andreas Menzel, Dirk Biermann, Andreas Zabel, Patrick Bollig, Ivan M. Ivanov, Chun Cheng, Raphael Holtermann, Thorsten Bartel. Evaluation of different approaches for modeling phase transformations in machining simulation
    451 -- 463Raphael Holtermann, Andreas Menzel, Sebastian Schumann, Dirk Biermann, Tobias Siebrecht, Petra Kersting. Modelling and simulation of Internal Traverse Grinding: bridging meso- and macro-scale simulations
    465 -- 471M. Deppermann, R. Kneer. Determination of the heat flux to the workpiece during dry turning by inverse methods
    473 -- 485Stefan Schindler, Marco Zimmermann, Jan C. Aurich, Paul Steinmann. Identification of thermal effects on the diameter deviation of inhomogeneous aluminum metal matrix composite workpieces when dry turning
    487 -- 494Bircan Bugdayci, Ismail Lazoglu. Temperature and wear analysis in milling of aerospace grade aluminum alloy Al-7050
    495 -- 504Matthias Schweinoch, Raffael Joliet, Petra Kersting, Andreas Zabel. Heat input modeling and calibration in dry NC-milling processes
    505 -- 515Pierre Faverjon, Joël Rech, Frédéric Valiorgue, Marc Orset. Optimization of a drilling sequence under MQL to minimize the thermal distortion of a complex aluminum part
    517 -- 526Unai Segurajauregui, Pedro José Arrazola. Heat-flow determination through inverse identification in drilling of aluminium workpieces with MQL
    527 -- 535Dirk Biermann, Ivan Iovkov. Investigations on the formation of straightness deviation in MQL deep-hole drilling of thin-walled aluminium components
    537 -- 549M. Putz, F. Tagliaferri, M. Dix, R. Wertheim. Methodology for analysing hybrid cutting processes with thermal assistance
    551 -- 562J. C. Outeiro, P. Lenoir, A. Bosselut. Thermo-mechanical effects in drilling using metal working fluids and cryogenic cooling and their impact in tool performance

    Volume 9, Issue 3

    289 -- 297Jan Langner, Malte Stonis, Bernd-Arno Behrens. Experimental investigation of a variable flash gap regarding material flow and influence of trigger forces
    299 -- 305Berend Denkena, T. Grove, O. Maiss. Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings
    307 -- 316Fritz Klocke, Gunter Spöcker, Tobias Huwer, Thomas Bobek, Kristian Arntz. Reducing data loss within adaptive process chains in the context of commonly-used CAx systems
    317 -- 328Jürgen Fleischer, Simon-Frederik Koch, Sven Coutandin. Manufacturing of polygon fiber reinforced plastic profiles by rotational molding and intrinsic hybridization
    329 -- 336Jan C. Aurich, Christian Effgen. Influence of the machining conditions when preparing cutting edges with elastic bonded grinding wheels
    337 -- 342Berend Denkena, T. Grove, M. A. Dittrich. Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel
    343 -- 349Norman Lang, Jens Saak, Peter Benner, Steffen Ihlenfeldt, Steffen Nestmann, Klaus Schädlich. Towards the identification of heat induction in chip removing processes via an optimal control approach
    351 -- 365Umakanta Mishra. An inventory model for deteriorating items under trapezoidal type demand and controllable deterioration rate
    367 -- 376Deniz Sari, Fritz Klocke, Christoph Löpenhaus. Gear finish hobbing: potentials of several cutting materials
    377 -- 391Cheng-Hsiang Liu, Cheng-I. Hsu. Dynamic job shop scheduling with fixed interval deliveries
    393 -- 404Florian Karl, Gunther Reinhart. Reconfigurations on manufacturing resources: identification of needs and planning
    405 -- 416Dirk Biermann, Jürgen Gausemeier, Hans-Peter Heim, Stefan Hess, Marcus Petersen, Angela Ries, Tobias Wagner. Planning and optimisation of manufacturing process chains for functionally graded components - part 2: case study on self-reinforced thermoplastic composites
    417 -- 424Josef Greitemann, Benjamin Stahl, Alexander Schönmann, Boris Lohmann, Gunther Reinhart. Strategic production technology planning using a dynamic technology chain calendar
    425 -- 431Christian Brecher, Christoph Löpenhaus, Rene Greschert. Influence of the metalworking fluid on the running behavior of gear analogy test parts

    Volume 9, Issue 2

    149 -- 159M. Redetzky, A. Rabenstein, B. Seidel, Ekkard Brinksmeier, H. Wilhelm. The influence of cell counts, cell size, EPS and microbial inclusions on the lubrication properties of microorganisms
    161 -- 166N. Jaburek, M. Merklein. Influence of a retrogression and reaging (RRA)-treatment on the mechanical and microstructural characteristics of the aluminium alloy AlZn4, 5Mg1
    167 -- 178J. Volpp, Frank Vollertsen. Modeling keyhole oscillations during laser deep penetration welding at different spatial laser intensity distributions
    179 -- 186Matthias Schweinoch, Raffael Joliet, Petra Kersting. Predicting thermal loading in NC milling processes
    187 -- 193Berend Denkena, T. Grove, L. Behrens. Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts
    195 -- 201Gerrit Behrens, Maximilian Ruhe, Hendrik Tetzel, Frank Vollertsen. Effect of tool geometry variations on the punch force in micro deep drawing of rectangular components
    203 -- 214P. Müller, B. Kranz, Sebastian Kriechenbauer, H. Schlegel. Experimental and numerical modal analysis of a servo-screw press with coupled drives as a basis for increasing flexibility and dynamics
    215 -- 223Rouven Hense, Christoph Wels, Petra Kersting, Ulrich Vierzigmann, Maria Löffler, Dirk Biermann, Marion Merklein. High-feed milling of tailored surfaces for sheet-bulk metal forming tools
    225 -- 235J. Stoll, R. Kopf, J. Schneider, G. Lanza. Criticality analysis of spare parts management: a multi-criteria classification regarding a cross-plant central warehouse strategy
    237 -- 246Mohammad Ali Kashfi, Mehrdad Javadi. A model for selecting suitable dispatching rule in FMS based on fuzzy multi attribute group decision making
    247 -- 255Ju. Tsekhanov, Michael Storchak. Development of analytical model for orthogonal cutting
    257 -- 267Berend Denkena, K. M. Litwinski, M. Eckl. Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine tools
    269 -- 276Tim Engelberth, Stefanie Apprich, Jens Friedrich, Daniel Coupek, Armin Lechler. Properties of electrically preloaded rack-and-pinion drives
    277 -- 287Matthias Glonegger, Gunther Reinhart. Planning of synchronized assembly lines taking into consideration human performance fluctuations

    Volume 9, Issue 1

    1 -- 10T. Senner, S. Kreissl, M. Merklein, M. Meinhardt, A. Lipp. Bending of unidirectional non-crimp-fabrics: experimental characterization, constitutive modeling and application in finite element simulation
    11 -- 24Ahmad Al-Qudsi, Matthias Kammler, Anas Bouguecha, Christian Bonk, Bernd-Arno Behrens. Comparison between different numerical models of densification during solid-state sintering of pure aluminium powder
    25 -- 34P. Groche, S. Calmano, T. Felber, S. O. Schmitt. Statistical analysis of a model based product property control for sheet bending
    35 -- 40Berend Denkena, Jens Köhler, Andreas Schindler, Stephan Woiwode. Kinematic analysis of the cutting speed for continuous generating grinding
    41 -- 49Andreas Krause, René Weirauch, Günter Bräuer, Malte Stonis, Bernd-Arno Behrens. Analysis of the friction behavior of DLC in warm bulk forming by using the ring compression test
    51 -- 59W. Hintze, C. Klingelhöller, O. Langhof. Curved sawing of thin lightweight components
    61 -- 71Matthias Meyer, Malte Stonis, Bernd-Arno Behrens. Cross wedge rolling and bi-directional forging of preforms for crankshafts
    73 -- 77Berend Denkena, D. Preising, Stephan Woiwode. Gear profile grinding with metal bonded CBN tools
    79 -- 86H. Sayadi, S. Serajzadeh. Prediction of thermal responses in continuous hot strip rolling processes
    87 -- 97Dmitry Babichev, Michael Storchak. Synthesis of cylindrical gears with optimum rolling fatigue strength
    99 -- 107Eckart Uhlmann, F. Sammler, M. Meixner, D. Heinrich, F. Gansert, Walter Reimers, D. Berger, I. Rieck. Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools
    109 -- 117Fritz Klocke, Kristian Arntz, Dominik Heeschen. Integrative technology chain design for small scale manufacturers
    119 -- 124Christian Brecher, Marcel Fey, M. Wennemer. Volumetric thermo-elastic machine tool behavior
    125 -- 132Berend Denkena, J. Friederichs, J. Fuchs. Design and analysis of a 2-DOF synchronous planar drive for machine tools
    133 -- 141Christian Brecher, Marcel Fey, S. Neus, Y. Shneor, K. Bakarinow. Influences on the thermal behavior of linear guides and externally driven spindle systems
    143 -- 148Jan Schlechtendahl, Matthias Keinert, Felix Kretschmer, Armin Lechler, Alexander Verl. Making existing production systems Industry 4.0-ready
    runs on