Table of Contents

• Set Based PLM Implementation, a Modular Approach to PLM Process Knowledge, Management and AutomationBas Koomen. 3-12 [doi]
• PLM Adoption Model for SMEsMourad Messaadia, Fatah Benatia, David Baudry, Anne Louis. 13-22 [doi]
• Maturity Models and Tools for Enabling Smart Manufacturing Systems: Comparison and Reflections for Future DevelopmentsAnna De Carolis, Marco Macchi, Boonserm Kulvatunyou, Michael P. Brundage, Sergio Terzi. 23-35 [doi]
• A Federated Enterprise Architecture and MBSE Modeling Framework for Integrating Design Automation into a Global PLM ApproachThomas Vosgien, Eugen Rigger, Martin Schwarz, Kristina Shea. 36-48 [doi]
• PLM Customizing: Results of a Qualitative Study with Industrial ExpertsEzgi Sucuoglu, Konrad Exner, Rainer Stark. 49-58 [doi]
• The Challenges of Adopting PLM Tools Involving Diversified Technologies in the Automotive Supply ChainJoseph P. Zammit, James Gao, Richard David Evans. 59-68 [doi]
• Twenty Years of PLM - the Good, the Bad and the UglyUrs Meier, Florian Fischli, Anita Sohrweide, Felix Nyffenegger. 69-77 [doi]
• PLM 4.0 - Recalibrating Product Development and Management for the Era of Internet of Everything (IoE)Julius D. Golovatchev, Prodip Chatterjee, Florian Kraus, Roger Schüssl. 81-91 [doi]
• Role of Openness in Industrial Internet Platform Providers' StrategyKaran Menon, Hannu Kärkkäinen, Thorsten Wuest. 92-105 [doi]
• Value Chain: From iDMU to Shopfloor Documentation of Aeronautical AssembliesManuel Oliva, Jesús Racero, Domingo Morales-Palma, Carmelo Del Valle, Fernando Mas. 106-115 [doi]
• Agent Based Framework to Support Manufacturing Problem Solving Integrating Product Lifecycle Management and Case-Based ReasoningAlvaro Camarillo, José Ríos, Klaus-Dieter Althoff. 116-128 [doi]
• PLM-MES Integration to Support Industry 4.0Gianluca D'Antonio, Lisa Macheda, Joel Sauza Bedolla, Paolo Chiabert. 129-137 [doi]
• Towards Cloud in a PLM Context: A Proposal of Cloud Based Design and Manufacturing MethodologyHussein Khlifi, Abhro Choudhury, Siddharth Sharma, Frédéric Segonds, Nicolas Maranzana, Damien Chasset, Vincent Frerebeau. 141-151 [doi]
• Flexible Best Fit Assembly of Large Aircraft Components. Airbus A350 XWB Case StudyRebeca Arista, Hugo Falgarone. 152-161 [doi]
• An Integrated Framework for Simulation and Analysis of Manual Assembly ProcessKyung-Hee Lee, Jong Youl Lee, Kyoung-Yun Kim, Sang Do Noh, Sung-Jun Kang, Doo-Myun Lee. 162-173 [doi]
• Analysis of the Robustness of Production Scheduling in Aeronautical Manufacturing Using Simulation: A Case StudyR. Pulido, T. Borreguero-Sanchidrián, Álvaro García-Sánchez, Miguel Ortega-Mier. 174-183 [doi]
• Development of a Part Criticality Index in Inventory ManagementClint Saidy, Liudas Panavas, Ramy F. Harik, Abdel-Moez Bayoumi, Joseph Khoury. 184-195 [doi]
• Cost Estimation Aided Software for Machined Parts: An Hybrid Model Based on PLM Tools and DataMarc-Antoine Michaud, Roland Maranzana. 199-211 [doi]
• Transformable Product Formal Definition with Its Implementation in CAD ToolsElise Gruhier, Robin Kromer, Frédéric Demoly, Nicolas Perry, Samuel Gomes. 212-222 [doi]
• Empty Space Modelling for Detecting Spatial Conflicts Across Multiple Design DomainsArun Kumar Singh, B. Gurumoorthy, Latha Christie. 223-230 [doi]
• Design and Development of Orthopedic Implants Through PLM StrategiesAndrea Patricia Murillo Bohórquez, Clara Isabel López Gualdrón, Javier Mauricio Martínez Gómez. 231-240 [doi]
• Digitization and Preservation of Cultural Heritage ProductsAbdelhak Belhi, Sebti Foufou, Abdelaziz Bouras, Abdul H. Sadka. 241-253 [doi]
• Towards Modelling and Standardisation Techniques for Railway InfrastructureChen Zheng, Samir Assaf, Benoît Eynard. 254-263 [doi]
• A Process Mining Based Approach to Support Decision MakingWidad Es-Soufi, Esma Yahia, Lionel Roucoules. 264-274 [doi]
• PLM in Engineering Education: A Pilot Study for Insights on Actual and Future TrendsJoel Sauza Bedolla, Gianluca D'Antonio, Frédéric Segonds, Paolo Chiabert. 277-284 [doi]
• Preliminary Study on Workshop Facilitation for IoT Innovation as Industry-University Collaboration PLM Program for Small and Medium Sized EnterprisesSatoshi Goto, Osamu Yoshie, Shigeru Fujimura, Kin'ya Tamaki. 285-296 [doi]
• PLM in Education - The Escape from BoredomBernhard Fradl, Anita Sohrweide, Felix Nyffenegger. 297-307 [doi]
• BIM-FM and Information Requirements Management: Missing Links in the AEC and FM InterfaceJulie Jupp, Ramsey Awad. 311-323 [doi]
• Automating Conventional Compliance Audit ProcessesJohannes Dimyadi, Robert Amor. 324-334 [doi]
• From Traditional Construction Industry Process Management to Building Lifecycle ManagementAda Malagnino, Giovanna Mangialardi, Giorgio Zavarise, Angelo Corallo. 335-344 [doi]
• BIM and PLM Associations in Current LiteratureGiovanna Mangialardi, Carla Di Biccari, Claudio Pascarelli, Mariangela Lazoi, Angelo Corallo. 345-357 [doi]
• What Do Students and Professionals Think of BIM Competence?Manish Yakami, Vishal Singh, Sunil Suwal. 358-368 [doi]
• Lean Thinking in the Digital EraLaura Cattaneo, Monica Rossi, Elisa Negri, Daryl Powell, Sergio Terzi. 371-381 [doi]
• The Evolution of the V-Model: From VDI 2206 to a System Engineering Based Approach for Developing Cybertronic SystemsMartin Eigner, Thomas Dickopf, Hristo Apostolov. 382-393 [doi]
• Replacement of Parts by Part Agents to Promote Reuse of Mechanical PartsHiroyuki Hiraoka, Atsushi Nagasawa, Yuki Fukumashi, Yoshinori Fukunaga. 394-403 [doi]
• Role of VR Throughout the Life of Low Volume Products Towards Digital Extended EnterprisesSimo-Pekka Leino, Antti Pulkkinen, Juha-Pekka Anttila. 404-415 [doi]
• Storytelling Platform for Virtual Museum Development: Lifecycle Management of an ExhibitionChaowanan Khundam, Frédéric Noël. 416-426 [doi]
• Automatic Configuration of Modularized ProductsJoel Sauza Bedolla, Stefano Amato, Alfredo Fantetti, Andrea Radaelli, Alex Saja, Gianluca D'Antonio, Paolo Chiabert. 429-439 [doi]
• Deployment of Product Configurators: Analysis of Impacts Within and Outside the User CompanyGianluca D'Antonio, Sara Mottola, Giovanni Prencipe, Arianna Rosa Brusin, Joel Sauza Bedolla, Paolo Chiabert. 440-449 [doi]
• Secure Modular Design of Configurable ProductsHenk Jan Pels. 450-461 [doi]
• Modular Architectures Management with PLM for the Adaptation of Frugal Products to Regional MarketsFarouk Belkadi, Ravi Kumar Gupta, Stéphane Natalizio, Alain Bernard. 462-472 [doi]
• A Multi-leveled ANP-LCA Model for the Selection of Sustainable Design OptionsManel Sansa, Ahmed Badreddine, Taieb Ben Romdhane. 473-486 [doi]
• Towards Smart Product Lifecycle Management with an Integrated Reconfiguration ManagementMichael Abramovici, Jens Christian Göbel, Philipp Savarino, Philip Gebus. 489-498 [doi]
• CAD Assembly Retrieval and BrowsingMatteo Rucco, Katia Lupinetti, Franca Giannini, Marina Monti, Jean-Philippe Pernot. 499-508 [doi]
• Analysing Product Development Process and PLM Features in the Food and Fashion IndustriesElisa d'Avolio, Claudia Pinna, Romeo Bandinelli, Sergio Terzi, Rinaldo Rinaldi. 509-521 [doi]
• Applying Closed-Loop Product Lifecycle Management to Enable Fact Based Design of BoatsMoritz von Stietencron, Karl A. Hribernik, Carl Christian Røstad, Bjørnar Henriksen, Klaus-Dieter Thoben. 522-531 [doi]
• Impact of PLM System in the New Food Development Process Performances: An Empirical ResearchClaudia Pinna, Laureline Plo, Monica Rossi, Vincent Robin, Sergio Terzi. 532-543 [doi]
• Implementing Total Lifecycle Product Sustainability Through True Lean ThinkingM. A. Maginnis, B. M. Hapuwatte, I. S. Jawahir. 544-553 [doi]
• A Methodological Framework for Ontology-Driven Instantiation of Petri Net Manufacturing Process ModelsDamiano Arena, Dimitris Kiritsis. 557-567 [doi]
• Engineering Knowledge Extraction for Semantic Interoperability Between CAD, KBE and PLM SystemsJullius Cho, Thomas Vosgien, Detlef Gerhard. 568-579 [doi]
• Towards a Proactive Interoperability Solution in Systems of Information Systems: A PLM PerspectiveZoubida Afoutni, Julien Le Duigou, Marie-Hélène Abel, Benoît Eynard. 580-589 [doi]
• Design and Implementation of a Prototype for Information Exchange in Digital Manufacturing Processes in Aerospace IndustryAndrés Padillo, Jesús Racero, Manuel Oliva, Fernando Mas. 590-600 [doi]
• Study of Data Structures and Tools for the Concurrent Conceptual Design of Complex Space SystemsClément Fortin, Grant McSorley, Dominik Knoll, Alessandro Golkar, Ralina Tsykunova. 601-611 [doi]
• Data Model in PLM System to Support Product TraceabilityDharmendra Kumar Mishra, Aicha Sekhari, Sébastien Henry, Yacine Ouzrout. 612-622 [doi]
• Deriving Information from Sensor Data - A General Approach for the Introduction of IoT Technologies for Field Data Analysis in Complex Technical SystemsMarco Lewandowski, Klaus-Dieter Thoben. 623-631 [doi]
• Context of Text: Concepts for Recognizing Context of Acquired Knowledge from DocumentsN. Madhusudanan, B. Gurumoorthy, Amaresh Chakrabarti. 632-641 [doi]
• Knowledge Modelling for an Electrical PLM System in AeronauticsChristophe Merlo, Éric Villeneuve, Sébastien Bottecchia, Pierre Diaz. 642-654 [doi]
• Development of a Smart Assembly Data ModelLuiz Fernando C. S. Durão, Sebastian Haag, Reiner Anderl, Klaus Schützer, Eduardo de Senzi Zancul. 655-666 [doi]
• Managing Maturity States in a Collaborative Platform for the iDMU of Aeronautical Assembly LinesDomingo Morales-Palma, Ignacio Eguia, Manuel Oliva, Fernando Mas, Carpóforo Vallellano. 667-676 [doi]
• The Design for Product Service Supportability (DfPSSu) Methodology: Generating Sector-Specific Guidelines and Rules to Improve Product Service Systems (PSSs)Claudio Sassanelli, Giuditta Pezzotta, Roberto Sala, Angelos Koutopes, Sergio Terzi. 679-689 [doi]
• Secure Concept for Online Trading of Technology Data in Global Manufacturing MarketGhaidaa Shaabany, Simon Frisch, Reiner Anderl. 690-700 [doi]
• Changing Information Management in Product-Service System PLM: Customer-Oriented StrategyAlexander Smirnov, Nikolay Shilov, Andreas Oroszi, Mario Sinko, Thorsten Krebs. 701-709 [doi]
• A Method for Lifecycle Design of Product/Service Systems Using PLM SoftwareTomohiko Sakao, Yang Liu, Rolf Gustafsson, Gabriel Thörnblad. 710-718 [doi]
• Defining a PSS Lifecycle Management System: Main Characteristics and Architectural ImpactsGiuditta Pezzotta, Mariangela Lazoi, Roberto Sala, Fabiana Pirola, Antonio Margarito, Lorenzo Quarta. 719-728 [doi]