External Links

    Journal: IEEE Trans. Contr. Sys. Techn.

    Volume 6, Issue 6

    689 -- 700Gregory W. Neat, James W. Melody, Boris J. Lurie. Vibration attenuation approach for spaceborne optical interferometers
    701 -- 706Wolfgang M. Schubert, Robert F. Stengel. Parallel synthesis of robust control systems
    707 -- 718Bor-Sen Chen, Yu-Min Cheng. ∞ optimal control design for practical applications: a genetic approach
    719 -- 729Xuan Kong, Pu Liu, Sen M. Kuo. Multiple channel hybrid active noise control systems
    730 -- 739Suresh M. Joshi, Atul G. Kelkar. Inner loop control of supersonic aircraft in the presence of aeroelastic modes
    740 -- 744Alexander Verl, Marc Bodson. Torque maximization for permanent magnet synchronous motors

    Volume 6, Issue 5

    577 -- 595Colin G. Anderson, Jean-Baptiste Richon, Tim J. Campbell. An aerodynamic moment-controlled surface for gust load alleviation on wind turbine rotors
    596 -- 611Marcello R. Napolitano, Dale A. Windon, Jose L. Casanova, Mario Innocenti, Giovanni Silvestri. Kalman filters and neural-network schemes for sensor validation in flight control systems
    612 -- 622Mark E. Jackson, Yuri B. Shtessel. Sliding mode thermal control system for space station furnace facility
    623 -- 634Fahmida N. Chowdhury, Jorge Luman Aravena. A modular methodology for fast fault detection and classification in power systems
    635 -- 650David L. Pepyne, Christos G. Cassandras. Design and implementation of an adaptive dispatching controller for elevator systems during uppeak traffic
    651 -- 662Ceri Evans, David Rees, Dave Hill. Frequency-domain identification of gas turbine dynamics
    663 -- 670Jung-Ho Moon, Moon-Noh Lee, Myung Jin Chung. Repetitive control for the track-following servo system of an optical disk drive
    671 -- 677Santosh V. Joshi, Sreenatha Gopalarao Anavatti, J. Chandrasekhar. Suppression of wing rock of slender delta wings using a single neuron controller
    678 -- 687Mooncheol Won, Seibum B. Choi, J. Karl Hedrick. Air-to-fuel ratio control of spark ignition engines using Gaussian network sliding control

    Volume 6, Issue 4

    445 -- 461Daniel Simon, Eduardo Castillo Castañeda, Paul Freedman. Design and analysis of synchronization for real-time closed-loop control in robotics
    462 -- 472Anthony Tzes, Pei-Yuao Peng, John Guthy. Genetic-based fuzzy clustering for DC-motor friction identification and compensation
    473 -- 481Daniel R. Madill, David W. L. Wang. 2-stability of a shape memory alloy position control system
    482 -- 494Xi-Ren Cao, Yat-Wah Wan. Algorithms for sensitivity analysis of Markov systems through potentials and perturbation realization
    495 -- 506Der-Ming Chang, Cheng-Ching Yu, I.-Lung Chien. Coordinated control of blending systems
    507 -- 514Rory A. Cooper, Tianna L. Fletcher-Shaw, Rick N. Robertson. Model reference adaptive control of heart rate during wheelchair ergometry
    515 -- 523Paolo Bolzern, Romano M. DeSantis, Arturo F. Locatelli, Dario Masciocchi. Path-tracking for articulated vehicles with off-axle hitching
    524 -- 533Jamal Daafouz, Germain Garcia, Jacques Bernussou. Robust control of a flexible robot arm using the quadratic d-stability approach
    534 -- 542Priyadarshee D. Mathur, William C. Messner. Controller development for a prototype high-speed low-tension tape transport
    543 -- 553Michael L. Zierolf, Marios M. Polycarpou, James G. Uber 0001. Development and autocalibration of an input-output model of chlorine transport in drinking water distribution systems
    554 -- 562Robert B. Gorbet, David W. L. Wang. A dissipativity approach to stability of a shape memory alloy position control system
    563 -- 570Yangquan Chen, Changyun Wen, Jian-Xin Xu, Mingxuan Sun. High-order iterative learning identification of projectile's aerodynamic drag coefficient curve from radar measured velocity data
    571 -- 576Gangbing Song, Ranjan Mukherjee. A comparative study of conventional nonsmooth time-invariant and smooth time-varying robust compensators

    Volume 6, Issue 3

    313 -- 324Kenneth R. Shouse, David G. Taylor. Sensorless velocity control of permanent-magnet synchronous motors
    325 -- 334Seibum Choi, J. Karl Hedrick. An observer-based controller design method for improving air/fuel characteristics of spark ignition engines
    335 -- 349Lyndon J. Brown, Sean P. Meyn, Robert A. Weber. Adaptive dead-time compensation with application to a robotic welding system
    350 -- 358Frederik Boe, Blake Hannaford. Online improvement of speed and tracking performance on repetitive paths
    359 -- 371Ajay Thukral, Mario Innocenti. A sliding mode missile pitch autopilot synthesis for high angle of attack maneuvering
    372 -- 387Carlos Bordons, Eduardo F. Camacho. A generalized predictive controller for a wide class of industrial processes
    388 -- 400Benedict Schenker, Mukul Agarwal. Predictive control of a bench-scale chemical reactor based on neural-network models
    401 -- 411Shahram Tafazoli, Clarence W. de Silva, Peter D. Lawrence. Tracking control of an electrohydraulic manipulator in the presence of friction
    412 -- 420Eiichi Ono, Shigeyuki Hosoe, Hoang Duong Tuan, Shun'ichi Doi. Bifurcation in vehicle dynamics and robust front wheel steering control
    421 -- 427Bo Li, David A. Hullender, Michael DiRenzo. Nonlinear induced disturbance rejection in inertial stabilization systems
    428 -- 434Bo Li, David A. Hullender. Self-tuning controller for nonlinear inertial stabilization systems
    435 -- 436D. Hrovat, D. Colvin, B. K. Powell. Comments on "Applications of some new tools to robust stability analysis of spark ignition engine: a case study"
    436 -- 439Andrew G. Alleyne. Physical insights on passivity-based TORA control designs
    439 -- 441Anders Robertsson, Rolf Johansson. Comments on "Nonlinear output feedback control of dynamically positioned ships using vectorial observer backstepping"

    Volume 6, Issue 2

    134 -- 145Brian R. Tibbetts, John Ting-Yung Wen. Extrusion process control: modeling, identification, and optimization
    146 -- 156Naoharu Yoshitani, Akihiko Hasegawa. Model-based control of strip temperature for the heating furnace in continuous annealing
    157 -- 171Tormod Drengstig, Dag Ljungquist, Bjarne A. Foss. 3 and temperature control of an aluminum electrolysis cell
    172 -- 179Remn-Min Guo. Development of an optimal crown/shape level-2 control model for rolling mills with multiple control devices
    180 -- 187Carla A. Schwartz, Jordan M. Berg. Neural-network feedback control of an extrusion
    188 -- 199Rodolfo Elías Haber Guerra, Clodeinir Ronei Peres Ferreira, Angel Alique Palomar, Salvador Ros Torrecillas, Carlos González Fernández-Vallejo, José Ramón Alique López. Toward intelligent machining: hierarchical fuzzy control for the end milling process
    200 -- 207Hirosh Kitada, Osamu Kondo, Hirosh Kusachi, Kingo Sasame. ∞ control of molten steel level in continuous caster
    208 -- 219Tim Hesketh, Yu An Jiang, David J. Clements, D. h. Butler, R. Van der Laan. Controller design for hot strip finishing mills
    220 -- 232Stephen Richard Duncan, Julian M. Allwood, Srinivas S. Garimella. The analysis and design of spatial control systems in strip metal rolling
    233 -- 245Alina Voda Besançon, Christian Delclos. Control of semicontinuous aluminum casting process
    246 -- 256Michel Dussud, Sylvie Galichet, Laurent P. Foulloy. Application of fuzzy logic control for continuous casting mold level control
    257 -- 269Eric John Muir Geddes, Ian Postlethwaite. Improvements in product quality in tandem cold rolling using robust multivariable control
    270 -- 280Emad Tabatabaei, Allon Guez, Hyuntae Choi. Adaptive sigmoidal molten metal pouring control
    281 -- 293Srinivas S. Garimella, Krishnaswamy Cheena Srinivasan. Application of iterative learning control to coil-to-coil control in rolling
    294 -- 303Björn Sohlberg. Monitoring and failure diagnosis of a steel strip process
    304 -- 312Lars Malcolm Pedersen, Björn Wittenmark. Multivariable controller design for a hot rolling mill

    Volume 6, Issue 1

    2 -- 14Dirk E. Torfs, Rudi Vuerinckx, Jan Swevers, Johan Schoukens. Comparison of two feedforward design methods aiming at accurate trajectory tracking of the end point of a flexible robot arm
    15 -- 20Giorgio Corriga, Alessandro Giua, Giampaolo Usai. An implicit gain-scheduling controller for cranes
    21 -- 32Pierre Apkarian, Richard J. Adams. Advanced gain-scheduling techniques for uncertain systems
    33 -- 42Jwu-Sheng Hu, Shiang-Hwua Yu, Cheng-Shiang Hsieh. Application of model-matching techniques to feedforward active noise controller design
    43 -- 61Anthony S. McCormack, Keith R. Godfrey. Rule-based autotuning based on frequency domain identification
    62 -- 71Sean C. Warnick, Munther A. Dahleh. Feedback control of MOCVD growth of submicron compound semiconductor films
    72 -- 87Andrea Caloini, GianAntonio Magnani, Mauro Pezzè. A technique for designing robotic control systems based on Petri nets
    88 -- 102Marcel P. G. J. Besteman, Camille H. L. Limpens, Robert Babuska, John B. Otten, Michel Verhaegen. Modeling and identification of a strip guidance process with internal feedback
    103 -- 110Ka-Lun Tung, Yeung Yam. System identification and control synthesis for a benchmark problem
    111 -- 120Jeongho Hong, Dennis S. Bernstein. Bode integral constraints, collocation, and spillover in active noise and vibration control
    121 -- 128Thor I. Fossen, Åslaug Grøvlen. Nonlinear output feedback control of dynamically positioned ships using vectorial observer backstepping
    runs on