Abstract is missing.
- Development of a Micro-scale Assembly Facility with a Three Fingered, Self-aware Assembly Tool and Electro-chemical Etching CapabilitiesJacob W. Chesna, Stuart T. Smith, D. J. Hastings, Borja de la Maza, Bartoz K. Nowakowski, Feilong Lin. 1-8 [doi]
- Semi-automated Assembly of a MEMS-Based Micro-scale CMM Probe and Future Optimization of the Process Chain with a View to Desktop Factory AutomationJames D. Claverley, Arne Burisch, Richard K. Leach, Annika Raatz. 9-16 [doi]
- Design, Fabrication and Testing of Assembly Features for Enabling Sub-micron Accurate Passive Alignment of Photonic Chips on a Silicon Optical BenchJ. F. C. van Gurp, Marcel Tichem, Urs Staufer. 17-27 [doi]
- Parallel Packaging of Micro Electro Mechanical Systems (MEMS) Using Self-alignmentJens Taprogge, Felix Beyeler, Alexander Steinecker, Bradley J. Nelson. 28-35 [doi]
- Processes for the Self-assembly of Micro PartsMatthias Burgard, Norbert Schläfli, Uwe Mai. 36-41 [doi]
- Precisely Assembled Multi Deflection Arrays - Key Components for Multi Shaped Beam LithographyMatthias Mohaupt, Erik Beckert, Thomas Burkhardt, Marcel Hornaff, Christoph Damm, Ramona Eberhardt, Andreas Tünnermann, Hans-Joachim Döring, Klaus Reimer. 42-50 [doi]
- Construction Kit for Miniaturised Handling Systems: Further Developments and First ApplicationsAndreas Hoch, Matthias Haag, Samuel Härer. 51-56 [doi]
- Flexible Gripper System for Small Optical Assemblies - Final Tests and FindingsTimo Prusi, Riku Heikkilä, T. H. Ha, J. Y. Song, C. W. Lee, Reijo Tuokko. 57-64 [doi]
- Handling and Manipulation of Microcomponents: Work-Cell Design and Preliminary ExperimentsSerena Ruggeri, Gianmauro Fontana, Claudia Pagano, Irene Fassi, Giovanni Legnani. 65-72 [doi]
- Adhesive Workpiece Fixturing for MicromachiningPhilipp Blumenthal, Annika Raatz. 73-80 [doi]
- Dual-Stage Feed Drive for Precision Positioning on Milling MachineHendra Prima Syahputra, Hyeon Mo Yang, Byeong-Mook Chung, Tae Jo Ko. 81-88 [doi]
- High Resolution Actuators for Severe EnvironmentsChristian Belly, Mathieu Bagot, Frank Claeyssen. 89-96 [doi]
- Tolerance Management for Assembly - Not a Matter of Product SizeRainer Müller, Martin Esser, Christian Janßen, Matthias Vette, Stefan Quinders. 97-104 [doi]
- Modelling and Analysis of the Geometrical Errors of a Parallel Manipulator Micro-CMMAli Rugbani, Kristiaan Schreve. 105-117 [doi]
- Methods for Implementing Compensation Strategies in Micro Production Systems Supported by a Simulation ApproachChristian Löchte, Jamal Kayasa, Christoph Herrmann, Annika Raatz. 118-125 [doi]
- Accuracy Measurements of Miniature Robot Using Optical CMMAsser Vuola, Reijo Tuokko. 126-133 [doi]
- A System for the Quality Inspection of Surfaces of Watch PartsGiuseppe Zamuner, Jacques Jacot. 134-143 [doi]
- Characterisation of High Accuracy, Feedback Controlled, Adhesive BondingRik Lafeber, Gerrit van den Bosch, Max Murre, Jitze Bassa, Leo van Moergestel, Erik Puik. 144-153 [doi]
- Towards Intelligent Assembly and Manufacturing Environment - Modular ICT Support for Holonic Manufacturing SystemMinna Lanz, Eeva Järvenpää, Pasi Luostarinen, Fernando Garcia, Reijo Tuokko. 154-162 [doi]
- Enabling Fast Ramp-Up of Assembly Lines through Context-Mapping of Implicit Operator Knowledge and Machine-Derived DataKonstantin Konrad, Michael Hoffmeister, Matthias Zapp, Alexander Verl, Johannes Busse. 163-174 [doi]
- Accelerated Ramp-Up of Assembly Systems through Self-learningRobert Oates, Daniele Scrimieri, Svetan M. Ratchev. 175-182 [doi]
- A Methodology for Assessing the Cost Effectiveness of Assembly ProcessesKwabena Agyapong-Kodua, Svetan M. Ratchev. 183-190 [doi]
- Model Based Planning of Complex Micro-manufacturing StrategiesDaniel Zdebski, Shukri Afazov, Svetan M. Ratchev, Joel Segal. 191-199 [doi]
- Towards an European Approach for Characterisation of Multimaterial Micromanufacturing Process CapabilitiesMarkus Dickerhof, Sabino Azcarate, Attila Temun. 200-209 [doi]