Abstract is missing.
- Analysis of the Applicability of Design for Microassembly Theory to Biomedical DevicesCarsten Tietje, Daniel Smale, Steve Haley, Svetan M. Ratchev. 5-12 [doi]
- A Haptic Tele-operated System for MicroassemblyPablo Estevez, Shahzad Khan, Pierre Lambert, Marcello Porta, Ilhan Polat, C. Scherer, Marcel Tichem, Urs Staufer, H. Hans Langen, Rob Munnig Schmidt. 13-20 [doi]
- Neutral Interface for Assembly and Manufacturing Related Knowledge Exchange in Heterogeneous Design EnvironmentMinna Lanz, Roberto Rodriguez, Pasi Luostarinen, Reijo Tuokko. 21-29 [doi]
- Assembly Analysis of Interference Fits in Elastic MaterialsKannan Subramanian, Edward P. Morse. 41-49 [doi]
- How Form Errors Impact on 2D Precision Assembly with Clearance?Pierre-Antoine Adragna, Serge Samper, Hugues Favrelière. 50-59 [doi]
- Precision Assembling and Hybrid Bonding for Micro Fluidic SystemsAgathe Koller-Hodac, Manuel Altmeyer, Silvio Walpen. 65-72 [doi]
- Feasibility of Laser Induced Plasma Micro-machining (LIP-MM)Kumar Pallav, Kornel Ehmann. 73-80 [doi]
- Focused Ion Beam Micro Machining and Micro AssemblyHongyi Yang, Svetan Rachev. 81-86 [doi]
- Hybrid Assembly for Ultra-Precise ManufacturingAlexander Steinecker. 89-96 [doi]
- Development of the Roll Type Incremental Micro Pattern Imprint System for Large Area Pattern ReplicationJung-Han Song, Hye-Jin Lee, Shuhuai Lan, Nak-Kyu Lee, Geun-An Lee, Tae-Jin Lee, Seogou Choi, Sung Min Bae. 97-104 [doi]
- Utilisation of FIB/SEM Technology in the Assembly of an Innovative Micro-CMM ProbeDaniel Smale, Steve Haley, Joel Segal, Ronaldo Ronaldo, Svetan M. Ratchev, Richard K. Leach, James D. Claverley. 105-112 [doi]
- Miniaturized Camera Systems for MicrofactoriesTimo Prusi, Petri Rokka, Reijo Tuokko. 115-122 [doi]
- Vision and Force Sensing to Decrease Assembly UncertaintyR. John Ellwood, Annika Raatz, Jürgen Hesselbach. 123-130 [doi]
- Modelling the Interaction Forces between an Ideal Measurement Surface and the Stylus Tip of a Novel Vibrating Micro-scale CMM ProbeJ. D. Claverley, A. Georgi, R. K. Leach. 131-138 [doi]
- Alignment Procedures for Micro-opticsMatthias Mohaupt, Erik Beckert, Ramona Eberhardt, Andreas Tünnermann. 143-150 [doi]
- Pneumatic Driven Positioning and Alignment System for the Assembly of Hybrid MicrosystemsChristian Brecher, Martin Freundt, Christian Wenzel. 151-158 [doi]
- Flexure-Based 6-Axis Alignment Module for Automated Laser AssemblyChristian Brecher, Nicolas Pyschny, Jan Behrens. 159-166 [doi]
- Approach for the 3D-Alignment in Micro- and Nano-scale Assembly ProcessesThomas Wich, Christian Stolle, Manuel Mikczinski, Sergej Fatikow. 167-173 [doi]
- Guidelines for Implementing Augmented Reality Procedures in Assisting Assembly OperationsViviana Chimienti, Salvatore Iliano, Michele Dassisti, Gino Dini, Franco Failli. 174-179 [doi]
- Monodirectional Positioning Using Dielectric ElastomersClaudia Pagano, Matteo Malosio, Irene Fassi. 180-187 [doi]
- Active Gripper for Hot Melt Joining of Micro ComponentsSven Rathmann, Annika Raatz, Jürgen Hesselbach. 191-198 [doi]
- Grasping and Interaction Force Feedback in MicroassemblyMarcello Porta, Marcel Tichem. 199-206 [doi]
- Low Voltage Thermo-mechanically Driven Monolithic Microgripper with Piezoresistive FeedbackVladimir Stavrov, Emil Tomerov, Chavdar Hardalov, Daniel Danchev, Kostadin Kostadinov, Galina Stavreva, Evstati Apostolov, Assen Shulev, Anna Andonova, Mohammed Al-Wahab. 207-214 [doi]
- Improvement of Robotic Micromanipulations Using Chemical FunctionalisationsJérôme Dejeu, Patrick Rougeot, Michaël Gauthier, Wilfrid Boireau. 215-221 [doi]
- Positioning, Structuring and Controlling with NanoprecisionRegine Hedderich, Tobias Heiler, Roland Gröger, Thomas Schimmel, Stefan Walheim. 222-226 [doi]
- Challenges of Precision Assembly with a Miniaturized RobotArne Burisch, Annika Raatz, Jürgen Hesselbach. 227-234 [doi]
- Application of a Reconfiguration Methodology for Multiple Assembly System ReconfigurationsD. Smale, Svetan M. Ratchev. 239-246 [doi]
- Multi-agent Architecture for Reconfiguration of Precision Modular Assembly SystemsPedro Ferreira, Niels Lohse, Svetan M. Ratchev. 247-254 [doi]
- Reconfigurable Self-optimising Handling SystemRainer Müller, Martin Riedel, Matthias Vette, Burkhard Corves, Martin Esser, Mathias Hüsing. 255-262 [doi]
- Modular and Generic Control Software System for Scalable AutomationChristian Brecher, Martin Freundt, Daniel Schöllhorn. 263-270 [doi]
- Agile Multi-parallel Micro Manufacturing Using a Grid of EquipletsErik Puik, Leo van Moergestel. 271-282 [doi]
- Development of a Reconfigurable Fixture for the Automated Assembly and Disassembly of High Pressure Rotors for Rolls-Royce Aero EnginesThomas Papastathis, Marco Ryll, Stuart Bone, Svetan Ratchev. 283-289 [doi]
- Architectures and Interfaces for a Micro Factory ConceptNiko Siltala, Riku Heikkilä, Asser Vuola, Reijo Tuokko. 293-300 [doi]
- Desktop Micro Forming System for Micro Pattern on the Metal SubstrateHye-Jin Lee, Jung-Han Song, Sol-Kil Oh, Kyoung-Tae Kim, Nak-Kyu Lee, Geun-An Lee, Hyoung-Wook Lee, Andy Chu. 301-308 [doi]
- Miniaturization of Flexible Screwing CellAsser Vuola, Riku Heikkilä, Timo Prusi, Mikko Remes, Petri Rokka, Niko Siltala, Reijo Tuokko. 309-316 [doi]
- A Cooperation Model and Demand-Oriented ICT Infrastructure for SME Development and Production Networks in the Field of Microsystem TechnologyMarkus Dickerhof. 319-328 [doi]
- A Methodology for Evaluating the Technological Maturity of Micro and Nano Fabrication ProcessesEmmanuel Brousseau, Richard Barton, Stefan Dimov, Samuel Bigot. 329-336 [doi]
- Function and Length Scale Integration Study in Emerging MST-Based ProductsSamuel Bigot, Stefan Dimov, Roussi Minev. 337-342 [doi]