Abstract is missing.
- Profitability analysis using data envelopment analysis-discriminant analysis: An empirical studyHung-Tso Lin, Yin-Chi Huang. 1-5 [doi]
- Comparison of neural network and regression techniques for nonlinear prediction problemsUsha A. Kumar, Mukta Paliwal. 6-10 [doi]
- A decision analysis on flexible scale of green logistics under limited carbon emission with real options conceptTyrone T. Lin, Mong-Tien Chan. 11-15 [doi]
- Integration model of Fuzzy C means clustering algorithm and TOPSIS Method for Customer Lifetime Value AssessmentAmir Hossein Azadnia, Muhamad Zameri Mat Saman, Kuan Yew Wong, Abdul Rahman Hemdi. 16-20 [doi]
- A modified algorithm to find a representative capacity with evenness consideration for non-additive robust ordinal regressionRoghayeh Hemmatjou, Nasim Nahavandi, Behzad Moshiri, Isa Nakhai Kamalabadi. 21-25 [doi]
- Established the evaluation structure of the investment benefit of the "Doubling Tourist Arrivals Plan" in TaiwanHuey-hsi Lo, Pei-cheng Wen. 26-31 [doi]
- Analyzing newsvendor problems by one-shot decision approaches with considering regretPeijun Guo, Yating Yang. 32-35 [doi]
- Simplification of decision making matrix in fuzzy multiple attribute decision makingZhi Pei, Li Zheng. 36-40 [doi]
- A Petri net approach to resource allocation in brand management systemsHongwei Liao, Min Lu. 41-45 [doi]
- Optimal determination of simulated annealing parameters using TOPSISFateme Fotuhi. 46-50 [doi]
- Merger and acquisition decisions analysis with sustainability operation conceptTyrone T. Lin, Yi-Shun Huang. 51-55 [doi]
- Simulation-based operational decision analysis at decoupling point in MTS-MTO systemFeng Y. Wang, Laura Xu, Ronald Lim, Eng Wah Lee, Michal Zarzycki. 56-60 [doi]
- Applying green goodwill for project management on green economics conceptTyrone T. Lin, Wei-Cheng Wu. 61-65 [doi]
- A Fuzzy-based Integrated Framework for monitoring stochastic demand in a supply chain environmentHenry C. W. Lau, Premaratne Samaranayake, Dilupa Nakandala. 66-70 [doi]
- A Multicriteria Decision model for managing business processesAna Carolina S. M. Campos, Adiel T. de Almeida. 71-75 [doi]
- Reducing violence: A proposal based on multicriteria SMARTS methodAndre M. Gurgel, Caroline M. Mota, Dario J. Aloise. 76-80 [doi]
- Selection and ranking of improvement approaches in construction companies: SMARTS methodRenata Maciel de Melo, Denise D. Medeiros, Adiel T. de Almeida. 81-85 [doi]
- Innovative support of creation by analogy-based searching of potential needsTakayuki Suzuki, Taro Tezuka, Atsushi Aoyama, Fuminori Kimura, Akira Maeda. 86-90 [doi]
- Insurance pricing, reinsurance and investment decision based on the Mutual Benefit of the insurer and the customerHong Mao, Krzysztof Ostaszewski. 91-95 [doi]
- Enhancing tool availability in the forging industry by adjusting PPC and tool maintenanceAnis Selaouti, Sven Baumgarten, Jens-Michael Potthast, Rouven Nickel. 96-100 [doi]
- Robust optimization for resource-constrained project scheduling with uncertain activity durationsRoel Leus, Christian Artigues, Fabrice Talla Nobibon. 101-105 [doi]
- EPSO for solving non-oriented two-dimensional bin packing problemMohamed K. Omar, Kumaran Ramakrishnan. 106-110 [doi]
- Equivalent relationships of problem formulations optimizing forecast accuracyXue-Ming Yuan, Wee Meng Yeo, Joyce Mei Wan Low. 111-115 [doi]
- Multi-heuristics based Genetic Algorithm for solving maritime inventory routing problemNurhadi Siswanto, Daryl Essam, Ruhul A. Sarker. 116-120 [doi]
- A heuristic algorithm for substrates testing in MCMKeisuke Murakami. 121-125 [doi]
- Nash equilibrium retail prices in a linear duopoly marketTomoki Hamaguchi, Koichi Nakade. 126-130 [doi]
- Cross docking scheduling with delivery time window and temporary storageDwi Agustina, Carman Ka Man Lee, Rajesh Piplani. 131-135 [doi]
- A stochastic formulation of successive software releases with faults severityOmpal Singh, P. K. Kapur, Adarsh Anand. 136-140 [doi]
- Capacitated hub location problems with waiting time at hubsArsham Atashi, Mostafa Abedzadeh. 141-145 [doi]
- Evaluation on operation management of cascade hydropower stationsY. Zheng, X. D. Fu, Jia-hua Wei, Xiang Li. 146-150 [doi]
- A review of data envelopment analysis models for handling data variationsChuen Tse Kuah, Kuan Yew Wong. 151-155 [doi]
- Order batching and picking in a synchronized zone order picking systemLi Pan, Joshua Zhexue Huang, Sydney C. K. Chu. 156-160 [doi]
- Evacuation route scheduling using discrete time-based Capacity-Constrained modelMojahid F. Saeed Osman, Bala Ram. 161-165 [doi]
- A hospital admission planning model for emergency and elective patients under stochastic resource requirements and no-showsPhongchai Jittamai, Thirapan Kangwansura. 166-170 [doi]
- Multi-processor job shop scheduling with due windowsRong-Hwa Huang, Shun-Chi Yu. 171-175 [doi]
- Spreadsheet approach for solving complex flowshop scheduling problemsMohamed K. Omar. 176-180 [doi]
- A pseudo-efficient frontier method for solving two-phase packing problemsDavid Raz, Arik Sadeh. 181-184 [doi]
- Moral hazard resolved in communication for S4n-logic - Acyclic communication network case -Takashi Matsuhisa. 185-189 [doi]
- Optimization of multi periods Inventory Routing Problem model with time varying demandNoor Hasnah Moin. 190-194 [doi]
- A math-heuristic approach for integrated resource scheduling in a maritime logistics facilityHuaXing Chen, Hoong Chuin Lau. 195-199 [doi]
- A tabu search algorithm for integrated inventory and vehicle routing problem in one depot and multicustomers distribution systemAnchalee Supithak. 200-205 [doi]
- Effective design of the construction supply chain: A case of small buildings in ThailandSataporn Amornsawadwatana. 206-210 [doi]
- Simply structured policies for a dynamic pricing problem with constant price elasticity demandChia-Shin Chung, James Flynn. 211-215 [doi]
- Governance mode in reverse logistics: A research frameworkQing Lu, Mark Goh, Robert de Souza. 216-220 [doi]
- Developing an improved particle swarm optimization algorithm for solving the inventory routing problem with direct shipmentIsa Nakhai Kamalabadi, Seyed Hessameddin Zegordi, Ali Hossein Mirzaei. 221-225 [doi]
- Risks assessment of lower tier suppliers using operational reliabilities and product availabilitiesGopal Agarwal, Piyush Singhal, Murari LaiMittal. 226-230 [doi]
- EOQ model development for perishable items under stock dependent demand and time dependent partial backlogging by using intelligent packagingNarges Khanlarzade, Isa Nakhai Kamalabadi, Babak Yousefi. 231-236 [doi]
- A study on lean supply chain performance measures of SMEs in the automotive industryFarzad Behrouzi, Kuan Yew Wong, Farshad Behrouzi. 237-241 [doi]
- An exploratory research on educational supply chain managementMd. Mamun Habib, Veena Tewari, V. V. R. Raman. 242-246 [doi]
- Production and distribution planning model for hinterland supply chainShi Tao Zhao, Xue-Ming Yuan, Shih-Fu Ling. 247-251 [doi]
- The application of vendor managed inventory in the supply chain inventory model with probabilistic demandYosi Agustina Hidayat, Ika Deefi Anna, Arlene Khrisnadewi. 252-256 [doi]
- A logistics execution method for the regional distribution centerYuan-Kuei Huang, Wei-Jun Lu, Jun-Der Leu. 257-263 [doi]
- Research on measuring method of supply chain resilience based on biological cell elasticity theoryYing Shuai, Xinping Wang, Lindu Zhao. 264-268 [doi]
- Critical success factors of total productive maintenance implementation: A reviewKam-Choi Ng, Gerald Guan Gan Goh, Uchenna Cyril Eze. 269-273 [doi]
- Designing the optimal strategies for supply chain financing under warehouse receipt pledging with credit lineNina Yan, Tian Tian. 274-278 [doi]
- A framework for integrated assessment of sustainable supply chain managementFarzad Dehghanian, Saeed Mansoor, Mahboobeh Nazari. 279-283 [doi]
- A multiobjective evolutionary approach for integration of location-inventory and vendor selection decisionsChia-Lin Hsieh. 284-288 [doi]
- Selection of distribution centers with the time value of money and the loyal customer effectAlireza Amini, Reza Tavakkoli-Moghaddam, Armand Baboli. 289-292 [doi]
- Coffee waste management. A case studyVirgínia H. Machado, Ana Paula Barroso, Carolina S. Santos, Virgilio Cruz-Machado. 293-297 [doi]
- A buffer stock model to ensure price stabilization and availability of seasonal staple food by empowering producer using warehouse receipt systemWahyudi Sutopo, Senator Nur Bahagia, Andi Cakravastia, T. M. A. Arisamadhi. 298-302 [doi]
- Conceptual model for information systems of sustainable supply chain managementMajid Aarabi, Muhamad Zameri Mat Saman, Mohammad Reza Khoei, Kuan Yew Wong, Hooshang M. Beheshti, Norhayati Zakuan. 303-307 [doi]
- Using an artificial neural network and a mathematical model for sugarcane harvesting schedulingSurached Thuankaewsing, Supachai Pathumnakul, Kullapapruk Piewthongngam. 308-312 [doi]
- Optimum quantities of make and buy in multi-item manufacturing firms with restriction in production capacityMohammadal A. Pirayesh Neghab, Saeed Poormoaied. 313-317 [doi]
- Study and application of scheduling method for just-in-time production in flexible job shopsWei Weng, Shigeru Fujimura. 318-322 [doi]
- Order selection of processed chicken under production capacity constraintsPachara Chatavithee, Kullapapruk Piewthongngam, Supachai Pathumnakul. 323-326 [doi]
- Clustering variables selection in Mass Customized scenarios affected by workers' learningMichel J. Anzanello, Flavio S. Fogliatto. 327-331 [doi]
- Interactive online process management and quality control for cross-sited production process chainsPeter Becker, Robert Schmitt. 332-336 [doi]
- Periodic Virtual Cell Manufacturing (P-VCM) - Concept, design and operationJannes Slomp, Dmitry Krushinsky, Rahul Caprihan. 337-341 [doi]
- A novel virtual design platform for product innovation through customer involvementXingyu Y. Chen, Chun-Hsien Chen, Kah Fai Leong. 342-346 [doi]
- Adaptive scheduling by means of product-specific emergence dataGunther Reinhart, Florian Geiger. 347-351 [doi]
- A worker assignment for machine cluster in the manufacturing cellSuksan Prombanpong, Waraporn Seenpipat. 352-356 [doi]
- Optimal production policy of production system with inventory-level-dependent demand in segmented marketYogender Singh, Kuldeep Chaudhary, P. C. Jha. 357-361 [doi]
- Heuristic decomposition and LP-based scheduling in make-and-pack productionPhilipp Baumann, Norbert Trautmann. 362-366 [doi]
- Robust optimization model for fan coil production planning under supply uncertaintyJamshid Nazemi, Roja Zakeri. 367-371 [doi]
- An application of network topology to understand the signal in process variability: A case study in petrochemical industryShamshuritawati Sharif, Maman A. Djauhari. 372-376 [doi]
- Monitoring and classifying evidence-based workload for profiling manual handling occupationsJan Pieter Clarys, Jonathan Tresignie, Aldo Scafoglieri, Erik Cattrysse. 377-381 [doi]
- Measurement of handgrip force of the dominant hand at pre-selected force levels for malesKai-Way Li. 382-384 [doi]
- Lumbosacral bending moment assessment and parameter optimization using Taguchi design during lifting task in a steel rolling millSarbjeet Singh, Sunand Kumar. 385-388 [doi]
- A perspective on human factors contributing to quality requirements: A cross-case analysisAnnlize Marnewick, Jan-Harm Pretorius, Leon Pretorius. 389-393 [doi]
- Occupational stress, knowledge sharing and GSD communication barriers as predictors of software engineer's creativityAamir Amin, Shuib Basri, Mohd. Fadzil Hassan, Mubashir Rehman. 394-398 [doi]
- Miners' tacit knowledge: A unique resource for developing human-oriented lean mining culture in deep minesMohammed Aminu Sanda, Jan Johansson, Bo Johansson. 399-404 [doi]
- Identifying the meaning of information signs in traffic facilitiesHsien-Yu Tseng, Bor-Shong Liu. 405-409 [doi]
- Analysis of design and purchase decision of central dust collection systemM. Yeasin Bhuiyan, A. I. Khan. 410-414 [doi]
- Role of knowledge management in world class manufacturing: An empirical investigationAbhijeet Digalwar, Kuldip Singh Sangwan. 415-419 [doi]
- Statistical quality control measurement on furniture manufacturerLaurence, Christine Puteri Utama, Jessica Hanafi. 420-423 [doi]
- The influence of geothermal environment to the quality of porcelain insulator: A correlation analysisN. Syahidah Yusoff, Maman A. Djauhari. 424-427 [doi]
- Learning organization in New Zealand and Malaysian manufacturing companiesAffandi Mohd-Zainal, Jane Goodyer, Nigel Grigg, Jafri Mohd Rohani. 428-432 [doi]
- Integration of production and supply chain strategic planning for renewable resources under sustainability considerations: Teakwood case studyBobby Kurniawan, Muhammad Hisjam, Wahyudi Sutopo. 433-437 [doi]
- On work performance for the labor-intensive manufacturingShin-Guang Chen. 438-442 [doi]
- In house industrial training for mechanical engineering students: A multidisciplinary approachS. K. Li, K. K. Lau, Vincent Li. 443-446 [doi]
- RFID-aided manufacturing training system and localizationSeng Fat Wong, W. I. Ho, Zhixin Yang, C. T. Kwok. 447-451 [doi]
- Students' experiences in different forms of support during doctoral studiesKatja Lahenius, Salla Maatta. 452-456 [doi]
- Educational game concept for the transfer of results from the transdisciplinary research to the new scientific generationFlorian G. H. Behncke, Moritz King, Udo Lindemann. 457-461 [doi]
- Quantitative analysis of international mobility of robotics researchers and characteristics of domestic robotics researchTakao Furukawa, Nobuyuki Shirakawa, Kumi Okuwada, Kazuya Sasaki. 462-466 [doi]
- Green design principles and trends of using them among Bangladeshi consumer goods manufacturersMd. Shahriar Jahan Hossain, Nafis Ahmad. 467-471 [doi]
- Evolutionary-based support vector machineR. J. Kuo, C.-M. Chen. 472-475 [doi]
- The effectiveness of hybrid negative correlation learning in evolutionary algorithm for combinatorial optimization problemsRonnachai Sirovetnukul, Parames Chutima, Warin Wattanapornprom, Prabhas Chongstitvatana. 476-481 [doi]
- A new guillotine placement heuristic combined with an improved genetic algorithm for the orthogonal cutting-stock problemSlimane Abou Msabah, Ahmed Riadh Baba-Ali. 482-486 [doi]
- Intelligent system for wind generating plantYoko Amano. 487-492 [doi]
- Collaborative and non-collaborative dynamic path prediction algorithm for mobile agents collision detection with dynamic obstacles in a two-dimensional spaceElmir Babovic. 493-498 [doi]
- Component-integrated sensors and communication for gentelligent devicesLudger Overmeyer, Lutz Rissing, Marc Christopher Wurz, Michael Dumke, Stefan Franke, Tim Griesbach, Alexander Belski. 499-503 [doi]
- Data mining application for customer segmentation based on loyalty: An iranian food industry case studyAli Hajiha, Reza Radfar, Samira Sarafi Malayeri. 504-508 [doi]
- Technology and knowledge sharing strategy in systems engineering practice performed by Indonesian expatriate engineersIka S. Windiarti, Timothy L. J. Ferris, Matthew J. Berryman. 509-513 [doi]
- An integrated multi agent based model to find the most agile supplierHoda Ghahremanloo, Mohammad Jafar Tarokh. 514-518 [doi]
- Measuring supply chain of packed milk from consumer perspective in PakistanFariza Kamran, Osman Babar, Muhammad Asim. 519-523 [doi]
- Impact of product design decisions within product development on the supplier selection process at the automotive industryFlorian G. H. Behncke, Katrin Abele, Udo Lindemann. 524-528 [doi]
- A measurement model for collaboration between suppliers and manufacturersPingyuan Zou, Hao Zhang. 529-533 [doi]
- An optimization model for global supplier selectionRamzi Hammami. 534-538 [doi]
- Service supply chain practices from the perspective of Malaysian tourism industryT. K. Hong, Suhaiza Zailani. 539-543 [doi]
- Optimal selection of location for Distributed Generations to ensure a competitive advantage using fuzzy analytical network processMahdiyeh Montazeri, Mohammad Saleh Owlia, A. Moghimi, Mohamad Kamalzadeh. 544-548 [doi]
- A self-crossover Genetic Algorithm for job shop scheduling problemShiwang Hou, Yongjiang Liu, Haijun Wen, Yuepeng Chen. 549-554 [doi]
- A solution to the capacitated lot sizing problemZhicong Zhang, Weiping Wang, Shouyan Zhong, Kaishun Hu. 555-559 [doi]
- Non-cooperative game decision for capacity evaluation under output demand uncertaintyTing Yang, Dinghua Zhang, Bing Chen, Shan Li. 560-564 [doi]
- Losses caused by the presetting of tools by the manual methodMilton Vieira Junior, Jose Martinele A. Silva, Ivan Correr, Nivaldo L. Coppini, Elesandro A. Baptista. 565-569 [doi]
- Feature fatigue analysis based on behavioral decision makingMingxing Wu, Liya Wang. 570-574 [doi]
- ® softwareNivaldo L. Coppini, Luiz C. Bekesas, Elesandro A. Baptista, Milton Vieira Junior, Wagner C. Lucato. 575-579 [doi]
- Simulation for implementing RFID-EPC in reverse supply chain based on consumer marketQiaolun Gu, Tiegang Gao. 580-584 [doi]
- The use of artificial neural network (ANN) for modeling of diesel contaminated soil remediation by composting processMehrdad Khamforoush, M.-Javad Rahi, Tahmas Hatami, Kourosh Rahimzadeh. 585-589 [doi]
- Integrated development of space systems - design for AIT - design for assembly, Integration and Testing of satellites - D4AITAdalberto Coelho Silva, Geilson Loureiro. 590-594 [doi]
- Using structural complexity management for design process driven modularizationHarrys Daniilidis, David Hellenbrand, Wolfgang Bauer, Udo Lindemann. 595-599 [doi]
- Study on dynamical properties and simulation of a four-dimensional nonlinear discrete dynamicsJing Peng, Zehua Miao, Luoping Zheng. 600-604 [doi]
- Organizational e-readiness impact on E-procurement implementationNaseebullah, Shuib Bin Basri, P. D. D. Dominic, Muhammad Jehangir. 605-609 [doi]
- Technological economic study for ocean energy development in ChinaTianqi Wang, Peng Yuan. 610-614 [doi]
- Profit generation in a machining service provider - Optimization combining Theory of Constraints and contribution margin conceptElesandro A. Baptista, Wagner C. Lucato, Nivaldo L. Coppini, Milton Vieira Junior, Luiz C. Bekesas. 615-619 [doi]
- Understanding project success: The four-level project success frameworkEskander M. Howsawi, David Eager, Ravindra Bagia. 620-624 [doi]
- Probabilistic sustainable design using multiobjective optimization modelJui-Sheng Chou, Thanh Son Le. 625-629 [doi]
- The role of time, cost and quality in project managementNurul Izah Anuar, Poh Kiat Ng. 630-634 [doi]
- A study of measuring the impact of employee perception on business-IT alignment via neural networkT. C. Wong, Shing-Chung Ngan, Felix T. S. Chan, Alain Yee-Loong Chong. 635-638 [doi]
- New insight into technology licensing strategy and innovation performance: Evidence from Chinese latecomers in high-tech industriesYang Yang Zhao, P. K. Wong, A. M. Subramanian, C. C. Hang. 639-643 [doi]
- Functional semantic retrieval for effects knowledge baseHongtao Wu, Jinling Zhang, Jianhong Ma, Runhua Tan. 644-648 [doi]
- Constructing a dynamic evaluation model for corporate diversification - The thin-film solar cellChang-Lin Yang, Rong-Hwa Huang. 649-653 [doi]
- A study of inter-firm network and knowledge integration impact mechanism on absorptive capacityZhigang Fan, Shuai Geng, Xiaoying Peng. 654-658 [doi]
- Adoption of hierarchical structure for web document analysis in knowledge management systemRozlini Mohamed, Junzo Watada. 659-663 [doi]
- Activities and problems in new product development process in the networking industry - A case of different business modelsMin-Sun Wuang, Shu-Min Chiang. 664-668 [doi]
- A case study on the importance of knowledge management in creative product developmentPoh Kiat Ng, Nurul Izah Anuar. 669-673 [doi]
- Improving a model for new service developmentAlireza Sheikhzadeh, Hamed Heidari. 674-678 [doi]
- HSR buying behavior modeling-Taiwan High Speed Railway caseHsiao-min Chuang, Chihpeng Chu, Yu-Tzeng Lin. 679-683 [doi]
- An approach of quality management in the small business environment of South AfricaBingwen Yan, Li Zhang. 684-688 [doi]
- Genetic algorithm for the project scheduling problem with fuzzy time parametersYilun Huang, Yongyi Shou, Lianfeng (Linda) Zhang. 689-693 [doi]
- Detection and improvement of deficiencies and failures in public-transportation networks using agent-enhanced distribution data miningEugene Levner, Avishai Ceder, Amir Elalouf, Yuval Hadas, Dvir Shabtay. 694-698 [doi]
- Forecasting the exchange rate between ASEAN currencies and USDTien-Chin Wang, Su-Hui Kuo, Hui-Chen Chen. 699-703 [doi]
- Pricing annuity insurance integrating mortality improvement risk, interest rate risk, insolvency risk and insurance demandHong Mao, Krzysztof Ostaszewski, Yuling L. Wang. 704-708 [doi]
- Possibilistic programming decision making in modality perspectiveNureize Arbaiy, Junzo Watada. 709-713 [doi]
- Towards a Lifecycle-oriented planning of a platform portfolioSebastian A. Schenkl, Robert Orawski, Fatos Elezi, Udo Lindemann. 714-718 [doi]
- About combined non-expansive and potentially expansive properties of a class of self-maps in metric spacesManuel de la Sen. 719-726 [doi]
- A preliminary study about the application of multicriteria decision aid to the evaluation of the road projects' performance on sustainable safetyRenaud Sarrazin, Yves De Smet. 727-732 [doi]
- Exploration of product Value - Characteristic relationship: Partial least squares path modeling for product design and developmentChathura Withanage, Taezoon Park, Truong Ton Hien Duc, Hae-Jin Choi. 733-737 [doi]
- Comparison between regression analysis and artificial neural network in project selectionOludolapo A. Olanrewaju, Adisa A. Jimoh, Pulek A. Kholopane. 738-741 [doi]
- Application of TOPSIS method for evaluating the temporal dimensions of Marand City in urban designMaliheh Hashemi, Mehdi Amiri-Aref. 742-746 [doi]
- Production and raw material ordering management for a manufacturing supply chain with uncertaintiesWei Xu, Dongping Song, Michael Roe. 747-751 [doi]
- Features selection approaches combined with effective classifiers in credit scoringChia-Ching Lin, Chin-Chih Chang, Feng-Chia Li, Tzu-Chin Chao. 752-757 [doi]
- Integrated optimisation of facilities layout and material handling systemDhamodharan Raman. 758-762 [doi]
- Model of spine configuration assembly line design for a Product familyDida D. Damayanti, Isa Setiasyah Toha. 763-767 [doi]
- Multi-objective assembly line balancing problem with bounded processing times, learning effect, and sequence-dependent setup timesNima Hamta, Seyyed M. T. Fatemi Ghomi, Mehrdad Hakimi-Asiabar, P. Hooshangi Tabrizi. 768-772 [doi]
- Optimization and modeling of turning process for aluminium - silicon carbide composite using Artificial Neural Network ModelsR. Jeyapaul, S. Sivasankar. 773-778 [doi]
- A framework for evaluating lean implementation appropriatenessDiogo Aurelio, António Grilo 0002, Virgilio Cruz-Machado. 779-783 [doi]
- Measuring efficiency of production lines based on maintenance factors; using DEASahar Abbasi, Hadi Shirouyehzad. 784-788 [doi]
- Comfort study of work environment of apparel industryWathavana Vithanage Randika Kosala, P. P. G. Nimesha Vilasini, Janaka R. Gamage. 789-793 [doi]
- Hybrid solving algorithm for complex machine scheduling problemJ. Behnamian, Seyyed M. T. Fatemi Ghomi, M. Zandieh. 794-798 [doi]
- Developing a framework for Six Sigma in financial service institutions - empirical evidence from expert interviewsAyon Chakraborty, Michael Leyer. 799-803 [doi]
- Improve burnishing formation yield applying Design for Six SigmaJianjun Wu, Yizhen Wang, Qizhong Zhang, Pengpeng Huang. 804-808 [doi]
- Robust monitoring of process mean vector in female shrouded connector production: An experience in MalaysiaRohayu Mohd Salleh, Maman A. Djauhari. 809-813 [doi]
- Research of relationship between tolerance allocation and machine movement chainJiping Lu, Shuiyuan Tang, Guanghe Lu, Hao Song. 814-818 [doi]
- Implementation of overall equipment effectiveness in wire mesh manufacturingRatapol Wudhikarn. 819-823 [doi]
- Strategic management of the triple constraint trade-off dynamics - a polarity management approachC. Jurie Van Wyngaard, H. C. Pretorius, Leon Pretorius. 824-828 [doi]
- Total productive maintenance in a semiconductor manufacturing firm: an empirical analysisKam-Choi Ng, Gerald Guan Gan Goh, Uchenna Cyril Eze. 829-833 [doi]
- Innovation Project Portfolio Management: the case of Philips ResearchSergey Filippov, Herman G. Mooi. 834-838 [doi]
- Project risk management: A new approachStefan Creemers, Erik Demeulemeester, Stijn Van de Vonder. 839-843 [doi]
- Exploring close-optimal solutions for the Time Constrained Scheduling Prolem in project managementChristos Kiriklidis, Konstantinos Kirytopoulos, Elena Rokou. 844-847 [doi]
- Application of real options in project portfolio selectionChengchao Wang, Yongyi Shou. 848-853 [doi]
- Risk factors influencing time and cost overrun in multiple D&B projects in Malaysia: A case studyChidambaram Ramanathan, Narayanan Sambu Potty, Arazi Bin Idrus. 854-859 [doi]
- Do project managers need an operations research support indeed? (A survey on polish project managers attitude towards operations research methods and tools)Tomasz Blaszczyk. 860-864 [doi]
- Dynamic fuzzy comprehensive evaluation of contract management in project departmentYunna Wu, Yong Huang, Wenjun Chen. 865-868 [doi]
- Particle swarm optimization for preemptive project scheduling with resource constraintsFei Li, Changtao Lai, Yongyi Shou. 869-873 [doi]
- An optimization model for the control of complex turnkey projects in plant engineeringEgon Müller, Ralph Riedel, Manuela Krones, Henrik Vay. 874-878 [doi]
- Team communications and academic R&D performance: A case of National Telecommunication Program of TaiwanChia-Liang Hung, Jerome Chih-Lung Chou, Shan-Jan Kuo. 879-883 [doi]
- Prioritizing activities on a building site projectLuciana H. Alencar, Adiel T. Almeida, Caroline M. M. Mota. 884-887 [doi]
- A multi-objective optimization and fuzzy prioritization approach for project risk responses selectionEbrahim Rezaee Nik, Seyed Hessameddin Zegordi, Ahad Nazari. 888-892 [doi]
- A serial scheme for minimizing the duration of resource-constrained projects within Microsoft ProjectNorbert Trautmann, Gianluca Brandinu. 893-897 [doi]
- Reverse logistics: Implementation in the industrial sector of EcuadorArun Kumar, Christian Veloz, Roesfiansjah Rasjidin. 898-902 [doi]
- Performance-based MRO service contracts with two customer classesNiak Wu Koh, Roland Y. G. Lim. 903-907 [doi]
- An effective heuristic for yard template design in land-scarce container terminalsMingkun Li, Shiying Li. 908-912 [doi]
- How the effect of country-of-origin on store brand moderates customer's affection-conation link toward multinational retailersYung-Hsin Chen, Shuo-Chang Tsai, Yi-Shuang Wu, Shu-Min Li. 913-917 [doi]
- Information sharing in supply chain: Modeling the barriersAkshay A. Pujara, Ravi Kant, M. D. Singh. 918-922 [doi]
- Service impact on customer demand and member profit in a supply chainRasul Jamshidi, Seyyed M. T. Fatemi Ghomi. 923-927 [doi]
- The resilience paradigm in the supply chain management: A case studyAna Paula Barroso, Virgínia H. Machado, Virgilio Cruz-Machado. 928-932 [doi]
- Minimizing the vulnerabilities of supply chain: A new framework for enhancing the resilienceUmang Soni, Vipul Jain. 933-939 [doi]
- Reducing risk in supply chains with forecasting - an analysisRichard Lackes, Markus Siepermann. 940-944 [doi]
- A supply chain coordination mechanism with credit option contract considering backordered demand of customerReza Hasani, Farid Khoshalhan. 945-949 [doi]
- An effective lean supply inventory management model using VMI hubWeidong Lin. 950-954 [doi]
- A new approach in supply chain modelingM. Pazoki, Seyyed M. T. Fatemi Ghomi, Fariborz Jolai. 955-958 [doi]
- Management process quality and safety at organizational level (A case study at an international airport)Mohammad Shahriari, Lennie Edman, K. Hamdani, Pedro Arezes. 959-963 [doi]
- Emergency Exposure Limits for toxic chemicals in Major hazard installations of ChinaHui Cui. 964-968 [doi]
- Optimal Risk Response plan of project risk managementAmnon Gonen. 969-973 [doi]
- Modeling a constraint-based Design Risk Management tool: An empirical study for collaborative product designJian Ruan, Sheng Feng Qin. 974-978 [doi]
- IT can improve healthcare management for patient safety - minimizing risk of blood transfusion with Point-of-Act-SystemMasanori Akiyama, Atsushi Koshio. 979-984 [doi]
- Occupational Safety & Health (OSH) performance of SMEs: A structured frameworkEnrico Cagno, Guido Jacopo Luca Micheli, Celeste Jacinto, Donato Masi. 985-989 [doi]
- A clustering approach to the operational resilience analysis of key resource supply chains (KRSC): The case of fast Moving Consumer GoodsPaolo Trucco, David Ward. 990-994 [doi]
- Electrostatic hazards of polypropylene powders in the fluidized bed reactorK. S. Choi, K. T. Moon, J. H. Chung, X. Bi, J. R. Grace. 995-999 [doi]
- Coordinating time-constrained multi-agent resource sharing with fault detectionShieu-Hong Lin. 1000-1004 [doi]
- A method for identifying process reuse opportunities to enhance the operating modelMarne de Vries, Alta van der Merwe, Paula Kotzé, Aurona Gerber. 1005-1009 [doi]
- Dynamic partitioning for enterprise applicationsMartin Grund, Jens Krüger 0003, Jürgen Müller 0003, Alexander Zeier, Hasso Plattner. 1010-1015 [doi]
- Pitfalls of information technology management systemsRaj Siriram. 1016-1023 [doi]
- Fuzzy hierarchical clustering based on fuzzy dissimilarityYaqiong Lv, Carman Ka Man Lee. 1024-1027 [doi]
- A comparison of technology trajectories between the global and the United States in smart gridSiou-Zih Lin, Ssu-Han Chen, Chun-Chieh Wang, Dar-Zen Chen. 1028-1032 [doi]
- Knowledge management implementation: Analytic hierarchy process methodologyRavi Kant, A. Anand, D. P. Patel, M. D. Singh. 1033-1037 [doi]
- Shared resources, capabilities and inclusive growth of clustered SMEs: A multiple case study in ChinaYilin Fan, Guowei Wan. 1038-1042 [doi]
- Applying K-means clustering and technology map in Asia Pacific-semiconductors industry analysisChin-Yuan Fan, M. F. Lai, T.-Y. Huang, C.-M. Huang. 1043-1047 [doi]
- Roadmapping an emerging technology in clean energy industry: A case study of dimethyl ether development in ChinaYuan Zhou, Guannan Xu, Jun Su, Tim Minshall, Qiang Zhi. 1048-1052 [doi]
- Structure of international research collaboration in wind and solar energyIchiro Sakata, Hajime Sasaki, Toshihiro Inoue. 1053-1057 [doi]
- A methodology for tracking the impact of changes in (re)designing of the industrial complex productNattawut Janthong. 1058-1062 [doi]
- Dynamic interactions between knowledge creation and resource mobilization in R&D management: A case of the inkjet innovation in JapanKen Hashimoto, Shuzo Fujimura. 1063-1067 [doi]
- Evaluation of the sci-tech service industry based on Factor Analysis - a demonstration study of 30 provinces in ChinaHongtao Yang, Huiling Huang. 1068-1072 [doi]
- Using methodologies to embed knowledge into the information systems development process: An investigation into the IT sector in ChinaYounes Benslimane, Zijiang Yang. 1073-1077 [doi]
- The impact of openness on innovation performance of China's firms: From the perspective of knowledge attributesXiaoting Zhao, Liang Liang. 1078-1082 [doi]
- Measurement and improvement of individual e-Business capabilityChui Young Yoon, Byung Hwan Kim. 1083-1087 [doi]
- Relations between corporate philanthropy and antecedent variables: Based on the empirical dataXueying Tian. 1088-1092 [doi]
- Key performance indicators for sustainable manufacturing evaluation in automotive companiesElita Amrina, Shari Mohd Yusof. 1093-1097 [doi]
- A fuzzy set covering-clustering algorithm for facility location problemRashed Sahraeian, Mohammad Sadeq Kazemi. 1098-1102 [doi]
- The scenario based regret and Min-max regret approach for location-allocation model of distribution center, with uncertain parametersMahdi Bashiria, Amir Moslemia. 1103-1107 [doi]
- Warehouse storage assignment: The case study of camera and lense manufacturerChompoonoot Kasemset, C. Rinkham. 1108-1112 [doi]
- A simulated annealing for solving a group layout design model of a dynamic cellular manufacturing systemReza Kia, Reza Tavakkoli-Moghaddam, Nikbakhsh Javadian, Mohammad Kazemi, Javad Khorrami. 1113-1117 [doi]
- A multi-period facility location-relocation problem in the presence of a probabilistic line barrierMehdi Amiri-Aref, Nikbakhsh Javadian, Reza Tavakkoli-Moghaddam, Mir-Bahador Aryanezhad. 1118-1122 [doi]
- Production system with respect for variable quantities for an economical electric vehicle productionGünther Schuh, Achim Kampker, Peter Burggraf, Carsten Nee. 1123-1128 [doi]
- Cost-effective planning of energy-measurement-systemsEgon Müller, Markus Buschmann, Kai-Uwe Wonneberger. 1129-1133 [doi]
- A review on models and practical methods for economic evaluation of Occupational Safety And Health (OSH)Enrico Cagno, Guido Jacopo Luca Micheli, Donato Masi, Celeste Jacinto. 1134-1139 [doi]
- Survey on energy efficiency measurements in heterogenous facility logistics systemsChristian Prasse, Andreas Kamagaew, Sebastian Gruber, Kathrin Kalischewski, Stefan Soter, Michael ten Hompel. 1140-1144 [doi]
- Benchmarking in the public service industry: The Italian water service management sectorCorrado Lo Storto. 1145-1149 [doi]
- Agent-based simulation of economic sustainability in waste-to-material recoveryQ. Z. Yang, Y. Z. Sheng, Z. Q. Shen. 1150-1154 [doi]
- The activities and typologies in service innovation design and deployment: A socio-technical perspective on university based Living LabHung-Chih Lai, Kae Kuen Hu, Li-Wei Chen. 1155-1159 [doi]
- Service quality, brand image and price fairness impact on the customer satisfaction and loyaltyChi-Chuan Wu, Shu-Hsien Liao, Yin-Ju Chen, Wei-Lun Hsu. 1160-1164 [doi]
- The feasibility of system dynamic modeling in value assessment of industrial servicesVille Ojanen, Samuli Kortelainen, Sakari Hyppanen. 1165-1169 [doi]
- Intermediating R&D and marketing value creation by open innovationShu Wang, Jin Chen, Fang Xie. 1170-1174 [doi]
- The connection between customer value creation and innovation strategy: A proposed framework and its implication in fashion productsD. Chien-Liang Kuo, Chien Chiang Lin, Yen-Kwan Wu. 1175-1179 [doi]
- Service innovation for the user interface of an ATM catering to the needs of the student communityGirish Krishnan, Sanjay Kumar, C. R. Jithin, Vinay V. Panicker, R. Sridharan. 1180-1184 [doi]
- Adoption of new service development tools in the financial service industryDayu Jin, Kah-Hin Chai, Kay-Chuan Tan. 1185-1189 [doi]
- Identification of best practices to achieve innovation, corporate entrepreneurship and spinoff in Chilean companiesAlfonso Bastias, Patricio Cortes. 1190-1194 [doi]
- Application of fuzzy mathematical programming to optimize an integrated production-distribution systemFardin Ahmadizar, Mehdi Zeynivand. 1195-1198 [doi]
- Supplier development: A decision making problemZahra Sharafi, Jamshid Parvizian. 1199-1203 [doi]
- Application of fuzzy-AHP extent analysis for supplier selection in an apparel manufacturing organizationMohammad Mahmudur Rahman, Kazi Badrul Ahsan. 1204-1208 [doi]
- A model for evaluating Lean, Agile, Resilient and Green practices interoperability in supply chainsPedro Espadinha-Cruz, António Grilo 0002, Rogerio Puga-Leal, Virgilio Cruz-Machado. 1209-1213 [doi]
- Arena simulation model for multi echelon inventory system in supply chain managementKunal Patil, Kai Jin, Hua Li. 1214-1217 [doi]
- Stability of production lines with multiple delaysNarthan Cemal Saadet, Ali Fuat Ergenc. 1218-1222 [doi]
- Fuzzy guidance strategies for fair multi-agent negotiation of wholesale price contractsOmar Kallel, Inès Ben Jaâfar, Lionel Dupont, Khaled Ghédira. 1223-1227 [doi]
- A simulation comparison analysis of effective pallet management scenariosMaria Grazia Gnoni, Gianni Lettera, Alessandra Rollo. 1228-1232 [doi]
- Does topology matter? land price and road networkSatoru Yamamoto, Yuya Kajikawa. 1233-1236 [doi]
- Market information, scope economies, and make-or-buy decision under information asymmetrySuxiu Xu, Qiang Lu, Xiaoming Hu. 1237-1241 [doi]
- Developing a new consumption experience scale for Taiwanese fine foods cultureChing-Yu Lien, Shu-Hwa Hsiao. 1242-1246 [doi]
- A model for carbon management of supplier selection in green supply chain managementChia-Wei Hsu, S. H. Chen, Cherng-Ying Chiou. 1247-1250 [doi]
- The ADT evaluation method based on MCMCLizhi Wang, Xiaoyang Li, Tongmin Jiang, Xiaotian Zhuang. 1251-1255 [doi]
- The impacts of common cause failures for two-unit parallel systems from RAMS+C point of viewChun-Yuan Cheng, Min Wang, Bee Leng Lee. 1256-1260 [doi]
- Redundancy allocation for series-parallel warm-standby systemsOla Tannous, Liudong Xing, Rui Peng, Min Xie 0001, Szu-Hui Ng. 1261-1265 [doi]
- Simulation-assisted estimation of failure models with stochastic hazard ratesKe Sun, Songlin Chen, Zhang Wu. 1266-1270 [doi]
- A multi-objective identical parallel machine scheduling with setup and removal times with deteriorating and learning effectsAlireza Amini, Reza Tavakkoli-Moghaddam, Fardad Niakan. 1271-1274 [doi]
- A novel approach to conduct risk analysis of FMEA for PCB fabrication processC. H. Wang. 1275-1278 [doi]
- A Genetic Algorithm Approach for Modelling and Optimisation of MAJSP- Part II: GA operators and resultsRoohollah Milimonfared, Romeo M. Marian, Zeinab Hajiabolhasani. 1279-1283 [doi]
- Examination of the effectiveness and robustness of the heuristics for bay-based quay crane scheduling problem in port container terminalsJiang Hang Chen, Stephen X. Zhang, Der Horng Lee. 1284-1288 [doi]
- Improving dispatch operations in complex courier organizationsLaura Paulin Lara Avila, Fatos Elezi, Maria Caridi, Udo Lindemann. 1289-1294 [doi]
- Project management for small wind turbines: An experimental survey on activities, lead times and risksMarcello Fera, Roberto MacChiaroli, Salvatore Miranda. 1295-1299 [doi]
- Composing a technology delivery system for an emerging energy technology: The case of dye-sensitized solar cellsYing Guo, Xuefeng Wang, Donghua Zhu. 1300-1304 [doi]
- Innovation risk-utility pathway method applied to dye-sensitized solar cellsYing Guo, Xuefeng Wang, Donghua Zhu. 1305-1308 [doi]
- Full service vehicle manufacturing: Rise and fallAlan Pilkington, Luciano Ciravegna. 1309-1313 [doi]
- A prescriptive approach to understand customer needs using value-focused thinkingXinwei Zhang, Guillaume Auriol, Claude Baron. 1314-1319 [doi]
- Investment center frameworkRomeo G. Manalo, Marivic V. Manalo. 1320-1324 [doi]
- Robustness and reliability consideration in product design optimization under uncertaintyXiaotian Zhuang, Rong Pan, Lizhi Wang. 1325-1329 [doi]
- System dynamics modeling for EFQM excellence model: Case study of a regional electricity company in IranMohammad Dehghani Saryazdi, Kazem Noghondarian, Mohammad Saleh Owlia, Jamal Hosseini Azabadi. 1330-1334 [doi]
- Control chart for monitoring dependent binomial processesTsen-I. Kuo, Cheng-Shih Lin, Tung-Tsan Chen, Hsin-Hua Hung. 1335-1337 [doi]
- System integration issues - Causes, consequences & mitigationsAdalberto Coelho Silva, Geilson Loureiro. 1338-1342 [doi]
- Process cascade- and segmentation-based organizational design: A case studyMarkus Kohlbacher, Doris Weitlaner. 1343-1347 [doi]
- Determining economic manufacturing quantity, the optimum process parameters based on Taguchi quadratic quality loss function under rectifying inspection planIsmail Al-Me'raj, Yahya Cinar, Salih O. Duffuaa. 1348-1353 [doi]
- Identifying quality improvement opportunities in a manufacturing enterpriseStanley Fore. 1354-1358 [doi]
- An EWMA -based method for monitoring polytomous logistic profilesHamidreza Izadbakhsh, Rassoul Noorossana, Marzieh Zarinbal, Amir Zarinbal, Mohammad Reza Safaian, Majid Chegeni. 1359-1363 [doi]
- A procurement model in an electronic market with coordination costsJishnu Hazra, B. Mahadevan. 1364-1368 [doi]
- E-business and e-commerce applications and trends in the retailing sector in ZimbabweCharles Mbohwa, Batanai Sammie. 1369-1374 [doi]
- MOA and TRA in social commerce: An integrated modelPei-Lee Teh, Pervaiz Khalid Ahmed. 1375-1379 [doi]
- The effects of psychological factors on online consumer behaviorShu-Hsien Liao, Yu-Chun Chung. 1380-1383 [doi]
- The research on relationships between customers' perceived value and repurchase intentionYiming Xiang, Lili L. Li, Xin Zhong. 1384-1386 [doi]
- Information Architecture for Online Review SystemG. Rajesri, P. Laras Ayutirta. 1387-1391 [doi]
- DMTT - An approach for business Document Mapping and Transformation in B2B collaborationWen-Jing Yan, Chong Minsk Goh, Puay Siew Tan, Valliappan Ramasamy. 1392-1396 [doi]
- Influencing factors of consumer intention towards web group buyingGuobiao Xie, Jie Zhu, Qiang Lu, Suxiu Xu. 1397-1401 [doi]
- A two-stage M/G/1 queue with discretionary priorityZhaotong Lian, Ning Zhao. 1402-1406 [doi]
- Heuristic algorithm for two-sided assembly line balancing problem with multi-objectivesXiaofeng Hu. 1407-1410 [doi]
- Considering decision maker ideas in product mix problems by goal programmingFahimeh Tanhaie, Nasim Nahavandi. 1411-1415 [doi]
- Optimization of queuing theory wait time through multi-skilled worker assignmentsA. Brown, Fazleena Badurdeen. 1416-1420 [doi]
- Application of data mining techniques to monitor the network-controllable robot's performanceYongjin (James) Kwon, Yongmin Park, Jungwan Hong. 1421-1425 [doi]
- Average flow time estimation of jobs in a Flexible Manufacturing Cell consisting of a number of identical machinesJannes Slomp, Jos A. C. Bokhorst, Rahul Caprihan. 1426-1430 [doi]
- Numerical simulation and experimental verification of electrode life for different coolants and its flow in plasma cutting torchM. Senthil Kumar, B. Dhanasekar, G. Ranga Janardhana, S. Paramasivam, K. S. Jaya Kumar. 1431-1435 [doi]
- An events-driven scheduling algorithm for two-cluster tools with processing time windowsXin Li, Richard Y. K. Fung, Hongyi Sun. 1436-1440 [doi]
- An efficient tabu search approach to determine cell formation problem with consideration of cell layoutChia-Ching Lin, Chin-Chih Chang, Feng-Chia Li. 1441-1445 [doi]
- Optimization of multiresponse problems using process capability index for batch manufacturing processesAmirhossein Amiri, Mahdi Bashiri, Hamed Mogouie. 1446-1450 [doi]
- Implementation of environmental management in the Austrian transport sector - do manager's attitudes matter?Elmar Furst, Peter Oberhofer. 1451-1455 [doi]
- Email network analysis for leadershipHisato Tashiro, Antonio Lau, Junichiro Mori, Nobuzumi Fujii, Yuya Kajikawa. 1456-1460 [doi]
- TQM organizational development for a global manufacturerKiyoshi Suzuki, Hisato Tashiro, Nobuzumi Fujii, Masayoshi Ushikubo, Ichiro Sakata. 1461-1465 [doi]
- Process capability analysis for non-normal distribution with lower specification limitDuygu Korkusuz, Hendry Raharjo, Bo Bergman. 1466-1470 [doi]
- Synthetic-np chart for attributesSalah Haridy, Zhang Wu. 1471-1475 [doi]
- Controlling non-conformities propagation in manufacturing. Case study in an electromechanical assembly plantValerie Fiegenwald, Samuel Bassetto, Michel Tollenaere. 1476-1480 [doi]
- Profile monitoring for Poisson responsesAmirhossein Amiri, Mehdi Koosha, Armaghan Azhdari. 1481-1484 [doi]
- The effect of an additional observation on covariance structureMaman A. Djauhari. 1485-1489 [doi]
- Effect of seemingly unrelated regression-based modeling approach on solution quality for correlated multiple response optimization problemsSasadhar Bera, Goutam Barman, Indrajit Mukherjee. 1490-1494 [doi]
- Heuristic and metaheuristic structure of response surface methodology in process optimizationMahdi Bashiri, Farshid Samaei. 1495-1499 [doi]
- The impact of tolerance limit on cost of qualityMohamed K. Omar, Sharmeeni Murugan, Rohana Abdullah. 1500-1504 [doi]
- Decision-making in process design based on failure knowledgeWei Dai, Jun Yang. 1505-1509 [doi]
- 2 charts under Gamma shock modelFengChia Li, PengKai Wang, LiLon Yeh, ShengWen Hong. 1510-1513 [doi]
- Integration of maintenance strategies for improved asset reliability and availabilityN. K. K. Prasanna, Shakti Akula, Tushar N. Desai. 1514-1518 [doi]
- Increasing availability of production systems in robust layouts via assignment of maintenance resourcesMajid Bazrafshan, Shahrzad Nikghadam, Shaomin Wu. 1519-1523 [doi]
- Reuse oriented group maintenance scheduling based on Hybrid Genetic Algorithm and Tabu SearchJihong Yan, Dingguo Hua, Zimo Wang. 1524-1528 [doi]
- State space model based reliability and sensitivity analysis for multistage manufacturing processFaping Zhang, Aiqing Chen, Hong Jing, Yan Yan, Hanbo Qian. 1529-1533 [doi]
- Software reliability modelling and optimization for multi-release software development processesQingpei Hu, Rui Peng, Min Xie 0001, Szu-Hui Ng, Gregory Levitin. 1534-1538 [doi]
- Multi up-gradation software reliability growth model with faults of different severityAmir Hossein Soleiman Garmabaki, Anu G. Aggarwal, P. K. Kapur. 1539-1543 [doi]
- Performance-based Burn-in for products sold with warrantyZhisheng Ye, Loon Ching Tang, Min Xie 0001. 1544-1548 [doi]
- System dynamics simulation for constructing maintenance management of ship machineryDhimas W. Handani, Kenji Ishida, Shintaro Nishimura, Surya Hariyanto. 1549-1553 [doi]
- Reliability of surveillance mission with unmanned aerial vehiclesKien Ming Ng, Jun Jiang, Rui Peng, Kim-Leng Poh, Kwong Meng Teo. 1554-1557 [doi]
- Reliability-based robust design optimization: A comparative studyVijay Rathod, Om Prakash Yadav, Ajay Pal Singh Rathore, Rakesh Jain. 1558-1563 [doi]
- Exploring impacts of single failure propagation between SCADA and SUCNan Cen, Irene Eusgeld. 1564-1568 [doi]
- Human factor in maintenance performance measurementDiego Galar, Christer Stenstrom, Aditya Parida, Rupesh Kumar, Luis Berges. 1569-1576 [doi]
- A maintenance service contract for a warranted productHennie Husniah, Udjianna S. Pasaribu, Abdul Hakim Halim, Bermawi P. Iskandar. 1577-1581 [doi]
- Expert-based FMEA of wind turbine systemMilton Kumar Das, Subhash Chandra Panja, Sunetra Chowdhury, Shyamapada P. Chowdhury, Andreas I. Elombo. 1582-1585 [doi]
- Condition-based maintenance for systems under dependent competing failuresLiangpen Chen, Zhisheng Ye, Boray Huang. 1586-1590 [doi]
- A model for linking knowledge management strategies, critical success factors, knowledge management practices and organizational performance; the case of Iranian universitiesAfarin Akhavan, Mohammad Saleh Owlia, Mostafa Jafari, Yahya Zare. 1591-1595 [doi]
- Identifying mapping relationships between functions and technologies: An approach based on association rule miningLinda L. Zhang, Roger Jianxin Jiao. 1596-1601 [doi]
- Ranking of technology transfer barriers in developing countries; case study of Iran's biotechnology industryKhashayar Yazdani, Kourosh Yazdani Rashvanlouei, K. Ismail. 1602-1606 [doi]
- Managing supply chain knowledge in the new product development process: A social network analysis approachMarianna Marra, William Ho, John S. Edwards. 1607-1611 [doi]
- An ontological approach for Program Management Lessons Learned: Case study at Motorola Penang Design CentreYu-N. Cheah, Soo Beng Khoh, Ghee Beng Ooi. 1612-1616 [doi]
- Optimization of a knowledge-based system by a meta-heuristic approach for the automotive diagnosisArmin Azarian, Ali Siadat, Patrick Martin. 1617-1622 [doi]
- Defining Technology EntrepreneurshipMarkus Spiegel, Christian Marxt. 1623-1627 [doi]
- Towards the integration of technological, organizational and human subsystems of organizations to enhance productivityMohammed Aminu Sanda, Jan Johansson. 1628-1632 [doi]
- Identification and classification of Human Error in process model developmentAlexander Nielen, Denise Költer, Susanne Mütze-Niewöhner, Christopher M. Schlick. 1633-1637 [doi]
- Technological capability building in network environments: The moderating effects of governance structureSuli Zheng, Zengyuan Wu. 1638-1642 [doi]
- Open innovation in Chinese high-tech enterprises: An empirical research based on Zhejiang provinceFang Liu, Gang Zheng. 1643-1647 [doi]
- The paradoxical property of knowledge in organizationsJ. Ajith Kumar. 1648-1653 [doi]
- Technology manager's radar screen: Monitoring competitors' innovation performanceChung-Huei Kuan, Huei-Ru Dong, Mu-Hsuan Huang, Dar-Zen Chen. 1654-1659 [doi]
- The impact of absorptive capacity on the ex-post adoption of agile methods: The case of Extreme Programming modelBouchaib Bahli, Younes Benslimane, Zijiang Yang. 1660-1664 [doi]
- Technology, quality and trade in the apple industryKayla Lopuch, Laura Syrett, John Conrad, Harm-Jan Steenhuis. 1665-1669 [doi]
- A Robust-Gain-Scheduled methodology for process parameter design and control with application to a carbonated beverage filling processAbdul-Wahid A. Saif, Muneeb A. Akram. 1670-1674 [doi]
- Design and modeling of Roll-to-Roll manufacturing system using simulation techniquesLaura Xiao Xia Xu, Chin Wei Gan, Feng-Yu Wang, Ma Bin, Roland Lim. 1675-1679 [doi]
- Design of comminution circuits for improved productivity using a multi-objective evolutionary algorithm (MOEA)Samson Mhlanga, Jabulani Ndlovu, Charles Mbohwa, Michael Mutingi. 1680-1684 [doi]
- Systems thinking for modeling risk propagation in supply networksAbhijeet Ghadge, Samir Dani, Roy Kalawsky. 1685-1689 [doi]
- A UML approach for the design of reconfigurable manufacturing simulation modelsHossam S. Ismail, Voon S. Tey, Lina Wang, Jenny Poolton. 1690-1694 [doi]
- Bayesian calibration of stochastic computer modelsJun Yuan, Szu-Hui Ng. 1695-1699 [doi]
- Wafer lot release policies based on the continuous and periodic review of WIP levelsKhaled S. El-Kilany. 1700-1704 [doi]
- A framework for solving the optimal display quantities with equality constraintTakuya Suganuma, Hiroyuki Goto. 1705-1709 [doi]
- Principles for modelling business processesAntonie van Rensburg. 1710-1714 [doi]
- Resolution of resource conflict in a Max-Plus Linear representation-case of a single projectShotaro Yoshida, Hirotaka Takahashi, Hiroyuki Goto. 1715-1719 [doi]
- A queuing system with risk-averse customers: sensitivity analysis of performanceCarlos Arturo Delgado, Ann van Ackere, Erik R. Larsen. 1720-1724 [doi]
- Balancing multi-robot prioritized task allocation: A simulation approachMurugappan Elango, Subramanian Nachiappan. 1725-1729 [doi]
- Modeling patient visits to Accident and Emergency Department in Hong KongM. Xu, T. C. Wong, K. S. Chin, S.-Y. Wong, K. L. Tsui. 1730-1734 [doi]
- Evaluation of a supply chain performance using a Fuzzy Decision Support SystemIsabel L. Nunes, Sara Figueira, Virgilio Cruz-Machado. 1735-1739 [doi]
- Assessing quality of manufacturing organizations - a Graph Theoretic ApproachMohit Singh, I. A. Khan, Sandeep Grover, S. C. Gupta. 1740-1744 [doi]
- On storage capacity pooling through the Supply Hub in Industrial Park (SHIP): The impact of demand uncertaintyXuan Qiu, George Q. Huang. 1745-1749 [doi]
- Efficiency improvement of job scheduling by using Genetic Algorithm: A case study in electronic industryBudtree Limwanich, Rati Wongsathan. 1750-1754 [doi]
- Process family planning: A methodology integrating Petri nets and knowledge-based systemsLianfeng (Linda) Zhang, Qianli Xu. 1755-1759 [doi]
- Shifting economic bottleneck identificationJunqiang Wang, Jian Chen, Shuo Wang, Yingfeng Zhang, ShuDong Sun. 1760-1764 [doi]
- Coordination policies in product development with reworkBingyin Bao, Suxiu Xu, Qiang Lu. 1765-1769 [doi]
- Research of supplier fuzzy evaluation based on customer satisfactionMinghai Jiao, Xueying Hong, Ping Yan, Long Ren. 1770-1774 [doi]
- A study on audit fees decision making: Evidence from China Stock MarketXin Li, Xiaobo Zhu. 1775-1779 [doi]
- Data pre-processing by genetic algorithms for bankruptcy predictionChih-Fong Tsai, Jui-Sheng Chou. 1780-1783 [doi]
- To form a smaller world in the research realm of hierarchical decision modelsBing Wang, Xiaotian Yao. 1784-1788 [doi]
- Threat evaluation model of targets based on information entropy and fuzzy optimization theoryLi-ying Feng, Qing Xue, Minxia Liu. 1789-1793 [doi]
- Study of deformation and compensation for Ram-Quill type spindleChia-Hui Tang, Ching-Feng Chang, Tsair-Rong Chen. 1794-1799 [doi]
- Fuzzy classification of gas power plant spare parts by combination statistical classification technique, SAW, ABC analysisSh. Hematyar. 1800-1804 [doi]
- Impact of work design concept on manufacturing performance: A process sector case studyP. P. G. Nimesha Vilasini, Udaya P. Kahangamage, Janaka R. Gamage, Wathavana Vithanage Randika Kosala. 1805-1809 [doi]
- Designing an integrated order fulfillment system for configure-to-order productionLianfeng (Linda) Zhang, Qianli Xu. 1810-1814 [doi]
- Planning process families with a knowledge-based systemLianfeng (Linda) Zhang, Qianli Xu, Yongyi Shou. 1815-1820 [doi]
- Performance evaluation of knowledgeable manufacturing systems using Petri nets considering dynamic eventsYoulong Lv, Jie Zhang. 1821-1825 [doi]
- Using Bayesian networks and importance measures to indentify tumour markers for breast cancerShubin Si, Guanmin Liu, Zhiqiang Cai, Peng Xia. 1826-1830 [doi]
- Identifying Critical Business rules using rough set theoryMohamad Aghdasi, S. Ehsan Malihi, Fatemeh Ghorbani. 1831-1835 [doi]
- Apply HLM to analyze government policies influence the accessibility of sidewalksChing-Tsung Hung. 1836-1842 [doi]
- Confidence interval estimation of software reliability growth models derived from stochastic differential equationsChih-Chiang Fang, Chun-Wu Yeh. 1843-1847 [doi]
- A genetic algorithm approach for modelling and optimisation of MAJSP- Part I: ModellingRoohollah Milimonfared, Romeo M. Marian, Zeinab Hajiabolhasani. 1848-1852 [doi]
- On the development of adoption of newer successive technologies using stochastic differential equationP. C. Jha, Kuldeep Chaudhary, Anshu Gupta. 1853-1858 [doi]
- A framework algorithm for a real-world variant of the vehicle routing problemVu Pham, Tien Dinh. 1859-1863 [doi]
- A branch and cut algorithm for the Multi-vehicle One-to-one Pickup and Delivery Problem with Split LoadsTemel Öncan, Dilek Tuzun Aksu, Guvenc Sahin, Mustafa Sahin. 1864-1868 [doi]
- Research on rapid design plan for engine based on Human Factors EngineeringHan Yu, Qing Xue, Minxia Liu. 1869-1872 [doi]
- Towards human stability in transport systemsPhilippe Richard, Vincent Benard, Frédéric Vanderhaegen, Patrice Caulier. 1873-1877 [doi]
- Work motivation and job performance of frontline employees: The mediating role of organizational commitmentPanagiotis Trivellas. 1878-1882 [doi]
- The human factors analysis of marine accidents based on Goal Structure NotionTingting Dai, Haiyan Wang. 1883-1887 [doi]
- Situational Awareness needs for system interaction designD'oria Islamiah Rosli, Azizah Abdul Rahman, Rose Alinda Alias. 1888-1892 [doi]
- A design of 3D modeling virtual fitting project for online shoppingPangli Zuo, Yi Zhao. 1893-1897 [doi]
- Achieving platform leadership: Application of inverting and porting in system developmentJerome Chih-Lung Chou, Chia-Liang Hung, W.-T. Li. 1898-1901 [doi]
- Uncertainty analysis on number of fatalities in building firesGuanquan Chu, Jinhui Wang. 1902-1906 [doi]
- Composable correlation mining of cloud service in cloud manufacturingHua Guo, Lin Zhang 0009, Fei Tao, Zhiyun Ren, Yongliang Luo. 1907-1911 [doi]
- Energy adaptive immune genetic algorithm for collaborative design task scheduling in Cloud Manufacturing systemYuanjun Laili, Lin Zhang, Fei Tao. 1912-1916 [doi]
- Design of a lean development frameworkUwe Dombrowski, Thimo Zahn. 1917-1921 [doi]
- Study on the variation and survival factors in the business evolution process based on Organizational EcologyJie Hou, Qiang Lu, Yongjiang Shi. 1922-1926 [doi]
- A new practical conformance testing method based on standardZhou Jiang, Li Zheng, Fujiang Liu, Qing Xiang. 1927-1931 [doi]