External Links

    Journal: IEEE Trans. Contr. Sys. Techn.

    Volume 11, Issue 6

    786 -- 798Riccardo Caponetto, Olga Diamante, Giovanna Fargione, Antonino Risitano, Domenico Tringali. A soft computing approach to fuzzy sky-hook control of semiactive suspension
    799 -- 811Tor Arne Johansen, Idar Petersen, Jens Kalkkuhl, Jens Lüdemann. Gain-scheduled wheel slip control in automotive brake systems
    812 -- 821Alireza Karimi, Daniel Garcia, Roland Longchamp. PID controller tuning using Bode's integrals
    822 -- 829Ki Seok Kim, Youdan Kim. Robust backstepping control for slew maneuver using nonlinear tracking function
    830 -- 838Sungyung Lim, Jonathan P. How. ∞ control for switched linear parameter-varying missile autopilot
    839 -- 849Chan-Chiao Lin, Huei Peng, Jessy W. Grizzle, Jun-Mo Kang. Power management strategy for a parallel hybrid electric truck
    850 -- 862Karl-Petter Lindegaard, Thor I. Fossen. Fuel-efficient rudder and propeller control allocation for marine craft: experiments with a model ship
    863 -- 874Kaushik Mahata, Saed Mousavi, Torsten Söderström, Magnus Mossberg, Urmas Valdek, Lars Hillström. On the use of flexural wave propagation experiments for identification of complex modulus
    875 -- 888Sergei Peresada, Andrea Tilli, Alberto Tonielli. Indirect stator flux-oriented output feedback control of a doubly fed induction machine
    889 -- 904Panagiotis Tsiotras, Brian Wilson. Zero- and low-bias control designs for active magnetic bearings
    905 -- 918Yunchun Yang, Jay A. Farrell. Two antennas GPS-aided INS for attitude determination
    919 -- 932Yang-O Kim, In-Joong Ha. Time-optimal control of a single-DOF mechanical system considering actuator dynamics
    933 -- 939Gerardo Escobar, Alex M. Stankovic, Eduardo Galvan, Juan Manuel Carrasco Solís, Romeo Ortega. A family of switching control strategies for the reduction of torque ripple in DTC
    940 -- 947Dimitrios Karagiannis, Eduardo Mendes, Alessandro Astolfi, Romeo Ortega. An experimental comparison of several PWM controllers for a single-phase AC-DC converter
    948 -- 956Damien Lefebvre, Philippe Chevrel, Sebastien Richard. An H-infinity-based control design methodology dedicated to the active control of vehicle longitudinal oscillations
    957 -- 959Ahmad B. Rad, Wai-Lun Lo, K. M. Tsang. Simultaneous online identification of rational dynamics and time delay: a correlation-based approach

    Volume 11, Issue 5

    612 -- 628Gregory E. Stewart, Dimitry M. Gorinevsky, Guy A. Dumont. Feedback controller design for a spatially distributed system: the paper machine problem
    629 -- 640Dimitry M. Gorinevsky, Cristian Gheorghe. Identification tool for cross-directional processes
    641 -- 655Markus P. J. Fromherz, Warren B. Jackson. Force allocation in a large-scale distributed active surface
    656 -- 667Paul D. A. Jones, Stephen R. Duncan, Tim Rayment, Patrick S. Grant. Control of temperature profile for a spray deposition process
    668 -- 683Abbas Emami-Naeini, Jon L. Ebert, Dick de Roover, Robert L. Kosut, Marco Dettori, La Moyne L. Porter, Sarbajit Ghosal. Modeling and control of distributed thermal systems
    684 -- 693John B. Yerashunas, J. Alexis De Abreu Garcia, Tom T. Hartley. Control of lateral motion in moving webs
    694 -- 704Zoltan K. Nagy, Richard D. Braatz. Worst-case and distributional robustness analysis of finite-time control trajectories for nonlinear distributed parameter systems
    705 -- 714Pascal Dufour, Françoise Couenne, Youssoufi Touré. Model predictive control of a catalytic reverse flow reactor
    715 -- 725Michaël Boulvin, Alain Vande Wouwer, Renato Lepore, Christine Renotte, Marcel Remy. Modeling and control of cement grinding processes
    726 -- 736Andrew J. Fleming, S. O. Reza Moheimani. Spatial system identification of a simply supported beam and a trapezoidal cantilever plate
    737 -- 745Yiming Lou, Panagiotis D. Christofides. Optimal actuator/sensor placement for nonlinear control of the Kuramoto-Sivashinsky equation
    746 -- 756Apostolos Rigopoulos, Yaman Arkun. Reduced order cross-directional controller design for sheet forming processes
    757 -- 764Michael A. Demetriou, Anastassia Paskaleva, Olga Vayena, Haris Doumanidis. Scanning actuator guidance scheme in a 1-D thermal manufacturing process
    765 -- 772Rui Neves da Silva, João Miranda Lemos, Luís Rato. Variable sampling adaptive control of a distributed collector solar field
    773 -- 781Edward Boje, Eduard Eitelberg. Augmented Kalman filtering for a superheated steam header system

    Volume 11, Issue 4

    429 -- 447Daniel U. Campos-Delgado, Bruno B. H. Schuermans, Kemin Zhou, Christian O. Pachereit, Eduardo Gallestey, Andreas Poncet. Thermoacoustic instabilities: modeling and control
    448 -- 459Mohammad Reza Sirouspour, Septimiu E. Salcudean. Suppressing operator-induced oscillations in manual control systems with movable bases
    460 -- 470Dingguo Chen, Ronald R. Mohler. Neural-network-based load modeling and its use in voltage stability analysis
    471 -- 481Michael J. Agostini, Gordon G. Parker, Hanspeter Schaub, Kenneth N. Groom, Rush D. Robinett. Generating swing-suppressed maneuvers for crane systems with rate saturation
    482 -- 494S. O. Reza Moheimani. A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers
    495 -- 504R. Antonelli, Jérôme Harmand, Jean-Philippe Steyer, A. Astolfi. Set-point regulation of an anaerobic digestion process with bounded output feedback
    505 -- 515David A. Smallwood, Louis L. Whitcomb. Adaptive identification of dynamically positioned underwater robotic vehicles
    516 -- 528Wail Gueaieb, Fakhri Karray, Salah Al-Sharhan. A robust adaptive fuzzy position/force control scheme for cooperative manipulators
    529 -- 538Philippe Charbonnaud, Francisco Javier Carrillo, Smaïn Médar. Robust control reconfiguration of a thermal process with multiple operating modes
    539 -- 547Zairong Xi, Gang Feng, Daizhan Cheng, Qiang Lu. Nonlinear decentralized saturated controller design for power systems
    548 -- 554Un-Chul Moon, Kwang Y. Lee. Hybrid algorithm with fuzzy system and conventional PI control for the temperature control of TV glass furnace
    555 -- 564Weixuan Liu, E. J. Davison. Servomechanism controller design of web handling systems
    565 -- 570Yuanchun Li, Guangjun Liu, Xiao Zhou. Fuel-injection control system design and experiments of a diesel engine
    571 -- 577Yingmin Jia, Hideki Kokame, Jan Lunze. Simultaneous adaptive decoupling and model matching control of a fluidized bed combustor for sewage sludge
    578 -- 587Felipe D. Vargas-Villamil, Daniel E. Rivera, Karl G. Kempf. A hierarchical approach to production control of reentrant semiconductor manufacturing lines
    588 -- 597Mouhacine Benosman, G. Le Vey. Stable inversion of SISO nonminimum phase linear systems through output planning: an experimental application to the one-link flexible manipulator
    598 -- 605Claudio Altafini. Path following with reduced off-tracking for multibody wheeled vehicles

    Volume 11, Issue 3

    289 -- 309Ahmed Ismail, Guy A. Dumont, Johan U. Backström. Dual adaptive control of paper coating
    310 -- 324Fabio Previdi, Emanuele Carpanzano. Design of a gain scheduling controller for knee-joint angle control by using functional electrical stimulation
    325 -- 334Petros A. Ioannou, Elias B. Kosmatopoulos, Alvin M. Despain. Position error signal estimation at high sampling rates using data and servo sector measurements
    335 -- 344Kaoru Inoue, Shigeru Yamamoto, Toshimitsu Ushio, Takashi Hikihara. Torque-based control of whirling motion in a rotating electric machine under mechanical resonance
    345 -- 354John N. Chiasson, Leon M. Tolbert, Keith Mckenzie, Zhong Du. Control of a multilevel converter using resultant theory
    355 -- 363Ignacy Duleba, Jurek Z. Sasiadek. Nonholonomic motion planning based on Newton algorithm with energy optimization
    364 -- 374Harshad Sane, Dennis S. Bernstein. Asymptotic disturbance rejection for Hammerstein positive real systems
    375 -- 382Syh-Shiuh Yeh, Pau-Lo Hsu. Analysis and design of integrated control for multi-axis motion systems
    383 -- 389Mohammad S. Islam, Iqbal Husain, Robert J. Veillette, Celal Batur. Design and performance analysis of sliding-mode observers for sensorless operation of switched reluctance motors
    390 -- 398Mihai Huzmezan, Guy A. Dumont, William Gough, Sava Kovac. Adaptive control of delayed integrating systems: a PVC batch reactor
    399 -- 407SangJoo Kwon, Wan Kyun Chung. A discrete-time design and analysis of perturbation observer for motion control applications
    408 -- 414Da-Wei Gu, Fu Wah Poon. A robust fault-detection approach with application in a rolling-mill process
    415 -- 425Prashanth Krishnamurthy, Farshad Khorrami. Robust adaptive voltage-fed permanent magnet step motor control without current measurements

    Volume 11, Issue 2

    164 -- 173Nilesh V. Kulkarni, K. Krishnakumar. Intelligent engine control using an adaptive critic
    174 -- 184Wolfgang Hoffmann, Katherine S. Peterson, Anna G. Stefanopoulou. Iterative learning control for soft landing of electromechanical valve actuator in camless engines
    185 -- 195Lichuan Li, Tadahiko Shinshi, Akira Shimokohbe. Asymptotically exact linearizations for active magnetic bearing actuators in voltage control configuration
    196 -- 203Maria Letizia Corradini, Giuseppe Orlando. Robust practical stabilization of nonlinear uncertain plants with input and output nonsmooth nonlinearities
    204 -- 215Guang-Ren Duan, David Howe. Robust magnetic bearing control via eigenstructure assignment dynamical compensation
    216 -- 220Sen M. Kuo, Xuan Kong, Woon S. Gan. Applications of adaptive feedback active noise control system
    221 -- 232Gianluca Antonelli, Fabrizio Caccavale, Stefano Chiaverini, Giuseppe Fusco. A novel adaptive control law for underwater vehicles
    233 -- 241Seung-Hi Lee, Sang-Hoog Chu, Chung Choo Chung. Analysis and design of servomechanism and its application to disk drives
    242 -- 247Robert Patton Leland. Adaptive mode tuning for vibrational gyroscopes
    248 -- 252Aman Behal, Matthew G. Feemster, Darren M. Dawson. An improved indirect field-oriented controller for the induction motor
    253 -- 257Jozef Vörös. Modeling and identification of Wiener systems with two-segment nonlinearities
    258 -- 266Giuseppe Fusco, Mario Russo. Self-tuning regulator design for nodal voltage waveform control in electrical power systems
    267 -- 272Haomin Lin, John E. McInroy. Adaptive sinusoidal disturbance cancellation for precise pointing of Stewart platforms
    273 -- 278Chih-Min Lin, Chun-Fei Hsu. Self-learning fuzzy sliding-mode control for antilock braking systems
    279 -- 285Hyun Soo Kim, Kyeong-Hwa Kim, Myung-Joong Youn. On-line dead-time compensation method based on time delay control

    Volume 11, Issue 1

    3 -- 15Peter J. Kennedy, Rhonda L. Kennedy. Direct versus indirect line of sight (LOS) stabilization
    16 -- 23V. Venkataramanan, Kemao Peng, Ben M. Chen, Tong H. Lee. Discrete-time composite nonlinear feedback control with an application in design of a hard disk drive servo system
    24 -- 31Eun-Chan Park, Hyuk Lim, Chong-Ho Choi. Position control of X-Y table at velocity reversal using presliding friction characteristics
    32 -- 42Kiyoshi Takagi, Hidekazu Nishimura. Control of a jib-type crane mounted on a flexible structure
    43 -- 51Dongguang Li, Sirish L. Shah, Tongwen Chen, Kent Z. Qi. Application of dual-rate modeling to CCR octane quality inferential control
    52 -- 61Erjen Lefeber, Kristin Ytterstad Pettersen, Henk Nijmeijer. Tracking control of an underactuated ship
    62 -- 72Craig F. Cutforth, Lucy Y. Pao. Control using equal length shaped commands to reduce vibration
    73 -- 83Long-Life Show, Jyh-Ching Juang, Ying-Wen Jan. An LMI-based nonlinear attitude control approach
    84 -- 90Giorgio Bartolini, Alfonso Damiano, Gianluca Gatto, Ignazio Marongiu, Alessandro Pisano, Elio Usai. Robust speed and torque estimation in electrical drives by second-order sliding modes
    91 -- 100Christopher J. Cottee, Stephen R. Duncan. Design of matching circuit controllers for radio-frequency heating
    101 -- 108Pradeep Setlur, John R. Wagner, Darren M. Dawson, Bernard Samuels. Nonlinear control of a continuously variable transmission (CVT)
    109 -- 118Ku Chin Lin. Observer-based tension feedback control with friction and inertia compensation
    119 -- 127Rajanikanth Vadigepalli, Francis J. Doyle III. A distributed state estimation and control algorithm for plantwide processes
    128 -- 138Jun-Ho Lee, Paul E. Allaire, Gang Tao, Jeffrey A. Decker, Xuerui Zhang. Experimental study of sliding mode control for a benchmark magnetic bearing system and artificial heart pump suspension
    139 -- 146Farhad Aghili, Martin Buehler, John M. Hollerbach. Experimental characterization and quadratic programming-based control of brushless-motors
    147 -- 152Herbert Werner, Petr Korba, Tai Chen Yang. Robust tuning of power system stabilizers using LMI-techniques
    153 -- 157Majura F. Selekwa, Emmanuel G. Collins Jr., Keqing Zhang, Hongye Su, Kaiyu Zhuang, Jian Chu. 2 optimal reduced order control design using a fuzzy logic methodology with bounds on system variances
    156 -- 157Keqing Zhang, Hongye Su, Kaiyu Zhuang, Jian Chu. Comments on "Discrete-time variable structure controller with a decoupled disturbance compensator and its application to a CNC servomechanism"
    157 -- 0Yongsoon Eun, Jung Ho Kim, Kwangsoo Kim, Dong-Il Cho. Authors' reply
    runs on