Table of Contents

• Long-Term LoRa Experiments in a Chemical PlantJessica Breitegger, Christian Raffelsberger, Siddhartha S. Borkotoky, Ingomar Rogler, Christian Bettstetter. 1-6 [doi]
• Adjusting the active joint stiffness of a collaborative robot arm for force controlRodrigo Pérez Ubeda, Ranko Zotovic Stanisic, Santiago C. Gutiérrez Rubert, Joaquin Lluch-Cerezo. 13-18 [doi]
• Application of Augmented Reality based on Sensing Data to Teleoperation System for Operator SupportKae Doki, Kenya Suzuki, Akihiro Torii, Suguru Mototani, Yuki Funabora, Shinji Doki. 19-24 [doi]
• Autonomous Vehicle Control Design Framework for Performance and DriveabilityAyhan Arda Araz, Erhan Ozkaya, Furkan Kocyigit, Enes Emre Bulut, Mertcan Cibooglu, Ahmetcan Erdogan. 25-31 [doi]
• Design Guidelines for the Evolutionary Integration of Physical Behaviour Models into Plant Simulations for Production EngineeringFelix Auris, Christian Diedrich. 32-38 [doi]
• Design, Characterization, and Control of a Size Adaptable In-pipe Robot for Water Distribution SystemsSaber Kazeminasab, Ali Akbari, Roozbeh Jafari, M. Katherine Banks. 39-46 [doi]
• Development of a Wearable Four-Degrees-of-Freedom Force Feedback Device with a Clutch Mechanism Using Artificial Muscle ContractionRyunosuke Sawahashi, Yuki Onozuka, Toshinari Tanaka, Manabu Okui, Taro Nakamura 0001. 47-54 [doi]
• Generalized Iterative Super-Twisting Sliding Mode Control: A Case Study on Flexure-Joint Dual-Drive H-Gantry StageWenxin Wang, Jun Ma 0008, Zilong Cheng, Xiaocong Li, Abdullah-Al Mamun 0002, Tong Heng Lee. 55-60 [doi]
• Implementation and Comparison of PID, PI-PD, LQR and MPC on Separation Clutch System in SlipBerkan Kaçmaz, Mehmet Turan Söylemez. 61-67 [doi]
• Model predictive control of vehicle dynamics based on the Koopman operator with extended dynamic mode decompositionMarko Svec, Sandor Iles, Jadranko Matusko. 68-73 [doi]
• MPC based Sliding Mode Control for More Electric Aircraft applicationAntonio Russo, Giacomo Canciello, Alberto Cavallo. 74-79 [doi]
• Operability Evaluation of Human-Adaptive Impedance Control for Human-collaborative RobotsMisaki Hanafusa, Jun Ishikawa. 80-86 [doi]
• Perturbation and Observer Based Sliding-Mode Controller for Excitation control in Single-Machine Infinite Bus SystemRaju Wagle, Pawan Sharma, Charu Sharma, Chittaranjan Pradhan. 87-92 [doi]
• Robust Control Design Toolbox for General Time Delay Systems via Structured Singular Value: Unstable Systems with Factorization for Two-Degree-of-Freedom ControllerMarek Dlapa. 93-98 [doi]
• Robust Simple Adaptive Control with Augmented Output Signal and Friction Compensation for Industrial Feed Drive SystemsShogo Harada, Naoki Uchiyama. 99-104 [doi]
• Time-varying group formation-tracking control for general linear multi-agent systems with switching topologies and time-varying delaysShiyu Zhou, Xiwang Dong, Qingke Tan, Qing Wang, Zhang Ren. 105-110 [doi]
• Verification of the "AB-Wear" Semi-Exoskeleton-Type Power-Assist Suit in Providing Assistance to the Lower BackYuta Yamanaka, Masashi Kashima, Hirokazu Arakawa, Rie Nishihama, Kazuya Yokoyama, Taro Nakamura 0001. 111-117 [doi]
• A Comparison Between Conventional and Flux-Intensifying Interior Permanent Magnet Synchronous MachinesE. G. Shehata. 121-126 [doi]
• A Performance Comparison of GaN FET and Silicon MOSFETShima Khoshzaman, Ingo Hahn. 127-133 [doi]
• A phase based approach for machine inductance estimation via current slope detection of an inverter fed IPMSMJan Philipp Degel, Stefan Haehnlein, Christian Klöffer, Martin Doppelbauer. 134-141 [doi]
• An Application of Active Disturbance Rejection Control to Stepper Motors with Field Oriented ControlJorge Sola Merino, Mario Di Castro, Alessandro Masi. 142-147 [doi]
• Automatic Detection of Rotor Faults in Induction Motors by Convolutional Neural Networks applied to Stray Flux SignalsDario Pasqualotto, Angela Navarro Navarro, Mauro Zigliotto, Jose A. Antonino-Daviu. 148-153 [doi]
• Bispectrum and Kurtosis Analysis of Rotor Currents for the Detection of Field Winding Faults in Synchronous MotorsMiguel Enrique Iglesias Martínez, Jose A. Antonino-Daviu, Carlos A. Platero, Larisa Dunai, J. Alberto Conejero, Pedro Fernández de Córdoba. 154-159 [doi]
• Carrier Modulation Schemes of Asymmetric, Multileveled, Switched Reluctance Machine DrivesPieter Antonie Scholtz, Michael Njoroge Gitau. 160-165 [doi]
• Comparison of Hybrid PM assisted Synchronous Reluctance MotorsV. Gowtham, S. Sashidhar. 166-171 [doi]
• Comparison of Synchronous Reluctance, PM assisted Synchronous Reluctance and Spoke-Type BLDC Motor for an E-RickshawJitendra Kumar, V. Gowtham, Sashidhar Sampathirao. 172-177 [doi]
• Design of a FPGA-based Inverter Drive for HF Injection Based Sensorless ControlB. Sultana, Kris Scicluna, Judie Attard, Clive Seguna, Jeremy Scerri. 178-183 [doi]
• Detection and Discrimination of Inter-Turn Short Circuit and Demagnetization Faults in PMSMs Based on Structural AnalysisSaeed Hasan Ebrahimi, Martin Choux, Van Khang Huynh. 184-189 [doi]
• Harmonic current injection for torque ripple reduction with optimum current trajectory for minimum induced voltageAndreas Langheck, Dominik Stretz, Jie Zhou, Thorsten Rittgerott, Johannes Kolb, Martin Doppelbauer. 190-197 [doi]
• High Performance Finite Control Set Model Predictive DTC for Three-to-Five Phase Direct Matrix Converter Fed Induction Motor DriveUtkal Ranjan Muduli, Ranjan Kumar Behera. 198-202 [doi]
• Improved DC-link Voltage Utilization for Dual Three-phase Drives with Full Anti-windup and Harmonic CompensationKai Cui, Hisham Eldeeb, Mohamed Abdelrahem, Ralph Kennel. 203-208 [doi]
• Modelling of Permanent Magnet Synchronous Generator with Non-linear MagnetsAnar Ibrayeva, Fausto Lopez, Sandra Eriksson. 209-214 [doi]
• Numerical modeling for 3D eddy current calculation in magneto-quasistatic approximationJaeho Ryu, Ingo Hahn. 215-220 [doi]
• Reduction in Eddy Current Loss of Concentrated Windings in High-power Density IPMSM Using Rectangular WindingsShinnosuke Kajii, Masatsugu Takemoto, Takehiro Jikumaru, Fuminori Suzuki, Satoshi Ogasawara, Koji Orikawa. 221-227 [doi]
• Reliability Model Development for Wind Turbine Drivetrain with Brushless Doubly-Fed Induction Machine as GeneratorSalman Abdi, Sara Sharifzadeh, Sam Amiri. 228-233 [doi]
• Sensorless Speed Control of Single-Inverter Dual Motors based on Slotting Saliency HarmonicEduardo Rodriguez Montero, Markus A. Vogelsberger, Thomas M. Wolbank. 234-239 [doi]
• Stability Analysis of a Non-Linear PWM-Controlled Buck Converter with LC Input FilterDaniel Lendi, Reiko Raute, Simon G. Fabri, Roger Galea. 240-245 [doi]
• 3D Space Vector Pulse Density Modulation Scheme for Two-Level Four-Leg InverterJeeshma Mary Paul, Biji Jacob. 249-254 [doi]
• A Low-Voltage-Deviation and Small-Output-Voltage-Ripple DC-DC Converter with Reduced Output Capacitance in Automotive ApplicationsDaisuke Nakashima, Yoichi Ishizuka. 255-259 [doi]
• A Modular Multilevel Converter with a Clamping Switch for Quasi-Three-Level OperationMalte Lorenz, Jakub Kucka, Axel Mertens. 260-265 [doi]
• A new Switched Capacitor Nine-Level Inverter Based on Flyback DC-DC converterMilad Ghavipanjeh Marangalu, Ataollah Samadian, Naser Vosoughi Kurdkandi, Arash Khoshkbar Sadigh, Seyed Hossein Hosseini. 266-271 [doi]
• A Novel Reference Current Detection Algorithm (RCDA) in 9-Level PEC Converter-based Shunt Active Power FilterAli Zafari, Majid Mehrasa, Mohammad Sharifzadeh, Seddik Bacha, Kamal Al-Haddad, Nasser Hosseinzadeh. 272-277 [doi]
• A Novel Semi-Isolated Three-Port dc-dc Power Converter with Soft Switching Technique for Hybrid Energy Storage ApplicationsSina Vahid, Ayman El-Refaie. 278-284 [doi]
• A Novel Three-Port DC-DC Converter for Integration of PV and Storage in Zonal DC MicrogridsPouya Zolfi, Sina Vahid, Ayman El-Refaie. 285-291 [doi]
• A Ripple-Free Output Current Interleaved DC/DC Converter Design Algorithm for EV ChargingRiccardo Mandrioli, Mattia Ricco, Manel Hammami, Aleksandr Viatkin, Gabriele Grandi. 292-297 [doi]
• A vanadium redox flow battery bracing the pilot microgrid at Eni Renewable Energy & Environmental R&DCenterJoseph Epoupa Mengou, Andrea Trovò, Chiara Gambaro, Massimo Guarnieri. 298-303 [doi]
• Active Damping Control for Variable-Speed Wind Turbines with VSM as Grid-Side ControlKatharina Günther, Constantinos Sourkounis. 304-309 [doi]
• An Intelligent Linearization Control Method for Grid-Tied Packed E-Cell Inverter under Load Variations and Parameters MismatchMajid Mehrasa, Mohammad Babaie, Mohammad Sharifzadeh, Seddik Bacha, Kamal Al-Haddad. 310-315 [doi]
• Analysis and Design of Resonant Class Φ2 Inverter with Low-Voltage StressHur Jedi. 316-321 [doi]
• Application of Variable Carrier Frequency Control by Using Wide Bandgap Semiconductors Inverter for WLTC Mode DrivingShota Hori, Yasuki Kanazawa, Hiroyasu Akatuka, Shen Wang, Shinji Doki, Hiroshi Tadano, Koji Shiozaki. 322-326 [doi]
• Bidirectional Partial Power DC-DC Configuration for HESS interface in EV PowertrainsHéctor J. Ferreira, Samir Kouro, Christian A. Rojas, Nicolas Muller, Sebastian Rivera. 327-332 [doi]
• Binary Capacitor Voltage Control-based MMC with a Hybrid Arm Design for Low Nominal DC Voltage ApplicationsSanghun Choi, A. P. Meliopoulos. 333-338 [doi]
• Comparison Between five MPPT Techniques for the Z-source inverter integrated into a PV system using MCBC control methodMoufek Khelifi, Omar Benzineb, El Madjid Berkouk. 339-344 [doi]
• Control of a Single Phase Modular Multilevel Converter based on a New Modulation TechniqueAnthony Abdayem, Jean Sawma, Flavia Khatounian, Eric Monmasson. 345-350 [doi]
• Design of a Gain Scheduling Pitch Controller for Wind Turbines by Using the Bode DiagramBenedikt Spichartz, Constantinos Sourkounis. 351-357 [doi]
• End-to-End Efficiency Improvement Technique for Supercapacitor Energy Stores in Renewable Energy ApplicationsChamara Dassanayake, Sachinda Ekanayake, Prabath Wijesinghe, Nicoloy Gurusinghe, Nihal Kularatna. 358-364 [doi]
• Enhanced solar water-pumping system driven by a synchronous reluctance motorDario Pasqualotto, Fabio Tinazzi, Mauro Zigliotto. 365-370 [doi]
• Grid connected Photovoltaic System Based on SPUC5 InverterHind El Ouardi, Mohammed El Kasmi Alaoui, Mariam Nabaoui, Mohammed Habib, Ayoub El Gadari, Youssef Ounejjar, Kamal Al-Haddad. 371-376 [doi]
• High-Frequency Spread-Spectrum Modulations for Wide-Bandgap Voltage Source ConvertersDavid Lumbreras, Jordi Zaragoza, Nestor Berbel, Juan Mon, Eduardo Gálvez, Alfonso Collado. 377-382 [doi]
• Improved Stability of DC Catenary Fed Traction Drivers and Auxiliary Converters using QFT Robust TechniqueJ. Manuel del Toro, Carlos de la Viesca, Santiago Cóbreces, Francisco Huerta 0001. 383-390 [doi]
• Influences of Cell to Cell Variances and the Battery Design on thermal and electrical imbalances among parallel Lithium-Ion CellsAlexander Fill, Kai Peter Birke. 391-396 [doi]
• Integration of Renewable Energy Sources to Wireless Charger of Electrical VehicleA. Shahin, J.-P. Martin, Serge Pierfederici, Adel M. Sharaf. 397-402 [doi]
• Large-Scale Wind Turbine With Quasi-Z-Source Inverter and BatteryEmanuel P. P. Soares-Ramos, Lais de Oliveira-Assis, Raúl Sarrias-Mena, Pablo García-Triviño, Carlos A. García-Vázquez, Luis M. Fernández-Ramirez. 403-408 [doi]
• Large-Signal Electrical Parameter Characterization in Inductive Power Transfer SystemsAlexis A. Narvaez, Claudio Carretero, Jesús Acero, José M. Burdio. 409-414 [doi]
• LQG digital state-feedback control of a Dual-Active-Bridge Series-Resonant ConverterFrancisco Huerta 0001, Daniel Santamargarita, Pablo Zumel, Cristina Fernández, Leonardo Ortega. 415-420 [doi]
• Model Predictive Control for paralleled UPS systems with load-side neutral wireTiago J. L. Oliveira, Luís M. A. Caseiro, André M. S. Mendes, Sérgio M. A. Cruz, Marina S. Perdigão. 421-426 [doi]
• Modeling and dynamic feedback linearization of a 5-switch tri-state buck-boost bidirectional DC-DC converterGabriel R. Broday, Gilney Damm, William Pasillas-Lépine, Luiz A. C. Lopes. 427-432 [doi]
• Modular Multilevel Converter Circulating Current Control with Single Active Filter Module per PhaseJonas E. Huber, Johann W. Kolar. 433-439 [doi]
• Modular Multilevel Converters Based on Interleaved Half-Bridge SubmodulesAleksandr Viatkin, Mattia Ricco, Riccardo Mandrioli, Tamás Kerekes, Remus Teodorescu, Gabriele Grandi. 440-445 [doi]
• Numerical Analysis of Renewable Generation Variability for Energy Storage Smoothing ApplicationsAndrés Peña Asensio, Manuel Garcia Plaza, Jesús López Merino, Fernando R. Martinez Mendoza, Maciej Marek Niegowski, Pedro Luis Camuñas García. 446-451 [doi]
• Optimal Utilization of the Dual-Active Bridge Converter with Bidirectional Charge ControlRemco W. T. Bonten, Jan M. Schellekens, Henk Huisman. 452-457 [doi]
• Optimization of Bidirectional Modular DC/DC Converter for Low and High Power Operation in Aircraft ApplicationsGustavo Sathler Zappulla, Bernardo Cougo, Antonio Leopoldo Rodríguez Vázquez, Antonio Russo, Beniamino Guida. 458-463 [doi]
• Partial Power Converter for DCX-based High-Power LED DriversAlan Wilson, Hugues Renaudineau, Freddy Flores-Bahamonde, Ana M. Llor. 464-469 [doi]
• Primary Control and Large-Signal Stability Criteria of an Enhanced Electrical Power System for Space ApplicationsQuentin Hilpert, Stéphane Caux, François Bonnet 0002, Marc Malagoli. 470-475 [doi]
• Research on SIDO Converter and Its Power Decoupling Control StrategyXinyue Zhang, Jiacheng Sun, Xiaohua Wu, Xuanlyu Wu, Wenli Yao. 476-481 [doi]
• Simple Model Predictive Control of High Power Direct-Driven PMSG Wind Energy SystemsE. G. Shehata, Jean Thomas. 482-487 [doi]
• Space Vector Modulation (SVM)-exploited Binary Capacitor Voltage Control (BCVC)-based Flying-Capacitor-Clamped Multilevel Converter (FCCMC) for Low Nominal DC Voltage ApplicationsSanghun Choi, A. P. Meliopoulos. 488-493 [doi]
• State Space Model for a Droop Control Strategy with Fault Ride-Through in UPS Parallel InvertersRoberto E. Carballo, Fernando Botteron. 494-501 [doi]
• Three-level DC-DC GaN-based Converter with Active Thermal Control for Powertrain applications in Electric VehiclesRubén González, Christian A. Rojas, Leonardo Callegaro. 502-507 [doi]
• Topology Review of Grid-Connected Multilevel Inverters Supplied by Photovoltaic Panels using Switched-Capacitor Based CircuitsTala Hemmati, Milad Ghavipanjeh Marangalu, Naser Vosoughi Kurdkandi, Arash Khoshkbar Sadigh, Seyed Hossein Hosseini 0002, Hossein Khoun Jahan. 508-513 [doi]
• Two Level AC-DC-AC Converter Design with a New Approach to Implement Finite Control Set Model Predictive ControlArmin Ebrahimian, Sina Vahid, Nathan Weise, Ayman El-Refaie. 514-520 [doi]
• ZPUC9-MMC: An Increased Voltage Level Modular Multilevel ConverterSaeed Arazm, Kamal Al-Haddad. 521-526 [doi]
• A Case Study for maximizing Hydroelectric annual revenue on Brazilian Power MarketJonas Pesente, Manuel Leonardo Sosa Ríos. 529-534 [doi]
• A Novel Approach of Loss Sensitivity Factor for Optimal Placement of Battery Energy Storage SystemClaysius Dewanata Widjaja, Fathin Saifur Rahman, Kevin M. Banjar-Nahor, Nanang Hariyanto. 535-540 [doi]
• A Novel Method for Stabilizing Buck-Boost Converters with CPL using Model Prediction ControlMilad Andalibi, Mojtaba Hajihosseini, Meysam Gheisarnejad, Mohammad Hassan Khooban, Jalil Boudjadar. 541-545 [doi]
• A Symmetric Block Resampling Method to Generate Energy Time Series DataSteven O. Kimbrough, Hasan Ümitcan Yilmaz. 546-551 [doi]
• Adapted Operational Management of Wind Turbines for the Provision of Primary Power ReserveKatharina Günther, Benedikt Spichartz, Constantinos Sourkounis. 552-558 [doi]
• Allocation and Optimal Sizing of Flexible Capacitor Banks for the Minimization of Active Power Losses in Long Unbalanced Rural Medium Voltage Distribution Feeders using Heuristic AlgorithmsKevin López, Walter Mariscal, Juan Plazarte, Javier Urquizo. 559-566 [doi]
• Analysis of Droop controlled paralleled Aircraft Generators through common DC BusDaniel Lendi, Cyril Spiteri Staines, Cedric Caruana, John Licari. 567-572 [doi]
• Analysis of methods to improve energy storage arbitrage benefit considering capacity degradationPedro Luis Camuñas, Jesús López Merino, Andrés Peña Asensio, Manuel García-Plaza, Santiago Arnaltes Gomez. 573-578 [doi]
• Applications of AI-Based Forecasts in Renewable Based Electricity Balancing MarketsZeenat Hameed, Seyedmostafa Hashemi, Chresten Træholt. 579-584 [doi]
• Control and Power Management of a 24-Hour DC Microgrid Improved ModelElie Hleihel, Maurice Fadel, Hadi Youssef Kanaan. 585-592 [doi]
• Distributed Economic Model Predictive Control of an Electric Power System Using ALADINSteffi Olesi Muhanji, Amro M. Farid. 593-598 [doi]
• Flexible Control Structure of a Smart Transformer for Universal OperationFrancisco Huerta 0001, Daniel Santamargarita, Emilio José Bueno, Rongwu Zhu, Marco Liserre. 599-604 [doi]
• Generator Available Inertia Estimation Based on Various Disturbance Measurements of PMUHongbo Ye, Xuemei Chen, Yong Cui, Chao Lu, Jun Gu, Xiaobo Ling. 605-610 [doi]
• Load modeling from smart meter data using neural network methodsNasrin Kianpoor, Bjarte Hoff, Trond Østrem. 611-616 [doi]
• Optimisation of Location and Size for Distributed Generation in Unbalanced GridsIsla Ziyat, Patrick R. Palmer, G. Gary Wang. 617-624 [doi]
• Potential Hazards of Transient Overvoltages in an Industrial DC Grid and Basic Protective MeasuresSimon Puls, Johann Austermann, Holger Borcherding. 625-630 [doi]
• Real-time Smart Microgrid Simulation: The integration of communication layer in electrical simulationHarshavardhan Palahalli, Enrico Ragaini, Giambattista Gruosso. 631-636 [doi]
• Single-Phase Bidirectional PEV Charger for V2G Operation with Coupled-Inductor Cuk ConverterBrajhan B. Quispe, Guilherme de Azevedo e Melo, Rodrigo Cardim, Jean Marcos de S. Ribeiro. 637-642 [doi]
• Smart charging impact on electric vehicles in presence of photovoltaicsKhaled Hajar, Baoling Guo, Ahmad Hably, Seddik Bacha. 643-648 [doi]
• Socio-economic and technological impact of a microgrid in isolated communities using Simulation ModelingCarlos Mario Paredes, Andrés F. Bayona, Diego Martínez, Alfons Crespo, José E. Simo, Apolinar González. 649-656 [doi]
• Statistical simulation of Electric Vehicle behaviour applied to low voltage distribution networkHarshavardhan Palahalli, Paolo Maffezzoni, Giambattista Gruosso. 657-662 [doi]
• Study on the Planning Method of Electric Vehicle Charging Station considering the Efficiency of Peak Shaving and Frequency RegulationsPeng Peng, Yuxuan Li, Zhenkai Hu, Changhong Deng, Liwen Zhu, Jun He. 663-668 [doi]
• A novel method for in-home Gait Speed estimation in Health Monitoring Using Bluetooth Low EnergyFernando J. Aranda, Fernando J. Álvarez, Felipe Parralejo, Emilio Sansano-Sansano, Raúl Montoliu. 671-676 [doi]
• A ROS Driver for Xsens Wireless Inertial Measurement Unit SystemsMattia Guidolin, Emanuele Menegatti, Monica Reggiani, Luca Tagliapietra. 677-683 [doi]
• Design and Manufacturing of a Wireless Temperature Monitoring System for Gas Insulated SwitchgearYing Li, Ji Wu, Zengbin Wang, Hong Lv, Yuzhu Wang, Yunjia Li. 684-689 [doi]
• Design and Validation of a Resonant Multi-Axis Force Sensor for Collaborative RoboticsDavinson Castano Cano, Mathieu Grossard, Arnaud Hubert. 690-696 [doi]
• A Feature-Based Machine Learning Approach for Mixed-Criticality SystemsNelson Vithayathil Varghese, Akramul Azim, Qusay H. Mahmoud. 699-704 [doi]
• A Microservice-Based Architecture for Performance and Energy Benchmarking of Docker-Host Linux Distributions on Internet-of-Things DevicesDavid Lennick, Akramul Azim, Ramiro Liscano. 705-711 [doi]
• A Queueing Model for Industrial Public Blockchains and ValidationZuqiang Ke, Nohpill Park. 712-717 [doi]
• Factory data management: Definition and differentiation from manufacturing operations managementAlexander Nowitschkow, Christopher Saal, Oliver Lohse. 718-721 [doi]
• Fault-tolerant Permanent Storage for Container-based Fog ArchitecturesZeinab Bakhshi, Guillermo Rodríguez-Navas, Hans Hansson. 722-729 [doi]
• Implicit Templates for Conformance Units in OPC UA Companion SpecificationsSebastian Friedl, Tonja Heinemann, Armin Lechler, Oliver Riedel. 730-735 [doi]
• Improve Test Quality by Applying a Clustering-based Test Planning Procedure for Customer Experience Vehicle FunctionsSimone König, Birgit Vogel-Heuser, Rainer Mäckel, Dominik Schnittger. 736-743 [doi]
• Multi-Access Edge Computing: An Overview and Latency EvaluationIgor Miladinovic, Sigrid Schefer-Wenzl, Thomas Burger, Heimo Hirner. 744-748 [doi]
• Prototyping intrusion detection in an industrial cloud-native digital twinWilliam Tärneberg, Per Skarin, Christian Gehrmann, Maria Kihl. 749-755 [doi]
• Rigid Body Movement Prediction Using Dual Quaternion Recurrent Neural NetworksAndreas Schwung, Johannes Pöppelbaum, Pradeep C. Nutakki. 756-761 [doi]
• Transferring a model-based development methodology to the automotive industryAlessio Bucaioni, Vlatko Dimic, Mattias Gålnander, Henrik Lönn, John Lundbäck. 762-767 [doi]
• An Automated Configuration Framework for TSN NetworksBahar Houtan, Albert Bergström, Mohammad Ashjaei, Masoud Daneshtalab, Mikael Sjödin, Saad Mubeen. 771-778 [doi]
• Development of an New ASIC based, Multi-channel Data Acquisition and Real-Time Processing SystemClive Seguna, Edward Gatt, Ivan Grech, Owen Casha, Giacinto De Cataldo. 779-782 [doi]
• Lean automated hardware/software integration test strategy for embedded systemsFlorian Muttenthaler, Stefan Wilker, Thilo Sauter. 783-788 [doi]
• Multiple PRM-Based Lockstep/Performance Mode Switches for Critical/Non-Critical Real-Time TasksJaehwan Jeong, Chang-Gun Lee. 789-796 [doi]
• Reliable Software Design Aided by QEMU SimulationRui Almeida, Luís Novais, Nelson Naia, Rui Faria, Jorge Cabral. 797-804 [doi]
• Simultaneous Multiprocessing on FPGA-CPU Heterogeneous ChipsSam Amiri, Salman Abdi, Sara Sharifzadeh. 805-809 [doi]
• Triton: a Domain Specific Language for Cyber-Physical SystemsBradley Wood, Akramul Azim. 810-816 [doi]
• Versatile SoC architecture for integration of HW accelerators in power electronics applicationsEdel Díaz Llerena, Raúl Mateos Gil, Javier Pavón Luque, Daniel Calvo Guillén. 817-822 [doi]
• A Comprehensive Review on Evolutionary Algorithm Solving Multi-Objective ProblemsYing Qu, Zheng Ma 0002, Anders Clausen, Bo Nørregaard Jørgensen. 825-831 [doi]
• A New Method for Semi-Supervised Segmentation of Satellite ImagesSara Sharifzadeh, Sam Amiri, Salman Abdi. 832-837 [doi]
• A novel optimization robust design of artificial neural networks to solve the inverse kinematics of a manipulator of 6 DOFTeodoro Ibarra-Pérez, Ma. del Rosario Martinez-Blanco, Fernando Olivera Domingo, Jose Manuel Ortiz-Rodriguez, Javier Gomez Escribano. 838-843 [doi]
• A Robust Passive Target Localization for Substation Inspection of UAV in a GPS-denied EnvironmentUi-Suk Suh, Tae Wan Kim, Dong-Hwa Kang, Kang Min Lee, Won Sang Ra, Taewook Kim. 844-849 [doi]
• An On-board Monitoring System for Driving Fatigue and Distraction DetectionBing-Ting Dong, Huei-Yung Lin. 850-855 [doi]
• Comparison of two semantic segmentation databases for smoke detectionSébastien Frizzi, Moez Bouchouicha, Eric Moreau. 856-863 [doi]
• Detection of Defects on Irregular Structured Surfaces by Image Processing Methods for Feature ExtractionTom Sander, Sven Lange, Ulrich Hilleringmann, Volker Geneiß, Christian Hedayat, Harald Kuhn, Franz-Barthold Gockel. 864-868 [doi]
• Development of Methods for Coil-Based Localization by Magnetic Fields of Miniaturized Sensor Platforms in BioprocessesSven Lange, Dominik Schröder, Christian Hedayat, Harald Kuhn, Ulrich Hilleringmann. 869-874 [doi]
• Driver Attention Assistance by Pedestrian/Cyclist Distance Estimation from a Single RGB Image: A CNN-based Semantic Segmentation ApproachAngelo Genovese, Vincenzo Piuri, Francesco Rundo, Fabio Scotti, Concetto Spampinato. 875-880 [doi]
• Estimation of Stochastic Time Lags between Data Sources in Distributed Production Facilities Based on Cross-Correlated SignalsJohannes Zumsande, Karl-Philipp Kortmann, Tobias Ortmaier, Mark Wielitzka. 881-888 [doi]
• Human Movement Direction Prediction using Virtual Reality and Eye TrackingJulius Pettersson, Petter Falkman. 889-894 [doi]
• Interaction by Hand-Tracking in a Virtual Reality EnvironmentMateus C. L. de Castro, Joao P. de A. Xavier, Paulo F. F. Rosa, Jauvane C. de Oliveira. 895-900 [doi]
• Long Short-Term Memory based RNN for COVID-19 disease predictionSafa Bahri, Moetez Kdayem, Nesrine Zoghlami. 901-906 [doi]
• Low-cost 3D LIDAR-based scanning system for small objectsJoão A. Braun Neto, José Luís Lima, Ana Isabel Pereira, Paulo Costa. 907-912 [doi]
• Performance Evaluation of Adversarial Learning for Anomaly Detection using Mixture ModelsYogesh Pawar, Manar Amayri, Nizar Bouguila. 913-918 [doi]
• Recognition of human activity and the state of an assembly task using vision and inertial sensor fusion methodsJames Male, Uriel Martinez-Hernandez. 919-924 [doi]
• Recursive Subspace-aided Frequency Estimator Based on the Propagator MethodKuan Li, Hao Luo, Xianling Li, Shen Yin. 925-930 [doi]
• Research on Automatic Recognition Method of Icon StylePinjie Lv, Xinyue Wang, Chengqi Xue. 931-935 [doi]
• Spatial image segmentation based on Beta-Liouville mixture models and Markov Random FieldMuhammad Azam 0002, Jai Puneet Singh, Nizar Bouguila. 936-941 [doi]
• ToF/Radar early feature-based fusion system for human detection and trackingFeryel Zoghlami, Okan Kamil Sen, Harald Heinrich, Germar Schneider, Emec Ercelik, Alois C. Knoll, Thomas Villmann. 942-949 [doi]
• VIO-Aided Structure from Motion Under Challenging EnvironmentsZijie Jiang, Hajime Taira, Naoyuki Miyashita, Masatoshi Okutomi. 950-957 [doi]
• A Design Methodology of Multi-level Digital TwinsStefano Centomo, Andrea Avogaro, Marco Panato, Carlo Tadiello, Franco Fummi. 961-966 [doi]
• A Design Pattern for Monitoring Adapter Connections in IEC 61499Pranay Jhunjhunwala, Jan Olaf Blech, Alois Zoitl, Udayanto Dwi Atmojo, Valeriy Vyatkin. 967-972 [doi]
• A Fault Diagnosis Strategy based on Qualitative Trend Analysis Integrating Andrews Plot for Industrial ProcessesShengkai Wang, Jie Zhang. 973-978 [doi]
• A Practical Deep Reinforcement Learning Approach to Semiconductor Equipment SchedulingChangHee Lee, Sunghee Lee. 979-985 [doi]
• A Stealth Program Injection Attack against S7-300 PLCsWael Alsabbagh, Peter Langendörfer. 986-993 [doi]
• A System For Drivers' Cognitive Load Estimation Based On Deep Convolutional Neural Networks and Facial Feature AnalysisShyngyskhan Abilkassov, Merey Kairgaliyev, Bauyrzhan Zhakanov, Berdakh Abibullaev. 994-1000 [doi]
• Adaptive Boosting Based on Multi-class Neural Networks for IGBT Health Parameter PredictionJilun Tian, Yuchen Jiang, Hao Luo 0003, Shen Yin. 1001-1006 [doi]
• Advanced Grandmaster Selection Method for Converged Wired and Wireless NetworksMaximilian Schüngel, Steven Dietrich, Ludwig Leurs, David Ginthör, Shun-Ping Chen, Michael Kuhn 0001. 1007-1014 [doi]
• Agent-Based Decentralised Process Planning and Evolutionary Change PropagationFelix Gehlhoff, Lukas Wiegandt, Alexander Fay. 1015-1020 [doi]
• An Industrial HMI Temporal Adaptation based on Operator-Machine Interaction Sequence SimilarityDaniel Reguera-Bakhache, Iñaki Garitano, Roberto Uribeetxeberria, Carlos Cernuda. 1021-1026 [doi]
• Benefits of Digitalization for Business Processes in Semiconductor ManufacturingGermar Schneider, Sophia Keil, Fabian Lindner. 1027-1033 [doi]
• Concepts for Retrofitting Industrial Programmable Logic Controllers for Industrie 4.0 ScenariosBernhard Rupprecht, Emanuel Trunzer, Simone König, Birgit Vogel-Heuser. 1034-1041 [doi]
• Cooperative Jamming Attack Strategy against Power Balance of Wireless Smart Grid NetworksHongquan Xu, Xueqi Jin, Qi Jin, Kai Luo, Wanbin Han. 1042-1047 [doi]
• Curiosity Based RL on Robot Manufacturing CellMohammed Sharafath Abdul Hameed, Md Muzahid Khan, Andreas Schwung. 1048-1053 [doi]
• Dynamic Adapter Connections for IEC 61499Paavo Kajola, Jan Olaf Blech, Udayanto Dwi Atmojo, Valeriy Vyatkin. 1054-1059 [doi]
• Dynamically Wiring CPPS Software ArchitecturesMichael Mayrhofer, Christoph Mayr-Dorn, Ouijdane Guiza, Alexander Egyed. 1060-1067 [doi]
• Enabling TSN over IEEE 802.11: Low-overhead Time Synchronization for Wi-Fi ClientsJetmir Haxhibeqiri, Xianjun Jiao, Muhammad Aslam 0006, Ingrid Moerman, Jeroen Hoebeke. 1068-1073 [doi]
• Evaluation of Industrial Energy Flexibility Potential: A Scoping ReviewDaniel Anthony Howard, Zheng Ma 0002, Bo Nørregaard Jørgensen. 1074-1079 [doi]
• Feasibility Study on Virtual Process Controllers as Basis for Future Industrial Automation SystemsMichael Gundall, Calvin Glas, Hans D. Schotten. 1080-1087 [doi]
• Flexible Tool Manipulation for High-Accuracy Removal Processing of Unknown Shape Convex partsTaichi Shimura, Ryosuke Tasaki, Harumo Sasatake, Takahito Yamashita, Masakazu Fujimoto. 1088-1093 [doi]
• Implementation of a Model Based Numerical Control for the Gravity Die Casting ProcessAnja Elser, Armin Lechler. 1094-1099 [doi]
• Industrial Robotic Arm in Machining Process Aimed to 3D Objects ReconstructionMatheus Zorawski Silva, Thadeu Brito, José L. Lima, Manuel F. Silva 0001. 1100-1105 [doi]
• IO-Link Wireless Device Cryptographic Performance and Energy EfficiencyThomas Robert Doebbert, Dmytro Krush, Christoph Cammin, Jonas Jockram, Ralf Heynicke, Gerd Scholl. 1106-1112 [doi]
• Knowledge Internalization using Virtual Training on the HoloLensFernando Arévalo, Christian Alison M. Piolo, Joachim Arens, Andreas Schwung, Matthias Hermes. 1113-1118 [doi]
• Leader-Follower Formation for UAVs with FOVs ConstraintChengxi Yu, Xi Chen. 1119-1124 [doi]
• Operations for non-disruptive modification of real-time network schedulesChristian von Arnim, Armin Lechler, Oliver Riedel. 1131-1137 [doi]
• Optimal Control with Linear Integer Programming for Reducing the Energy Consumption of Interdependent Mixing Machines in FoundryAlexander Rose, Axel Schild, Bennet Luck, Martin Grotjahn. 1138-1143 [doi]
• QoS for Dynamic Deployment of IoT ServicesHaris Isakovic, Luis Lino Ferreira, Irmin Okic, Adam Dukkon, Zlatan Tucakovic, Radu Grosu. 1144-1151 [doi]
• Real-time Alarm Dissemination in Mobile Industrial NetworksChristian Sauer 0003, Eike Lyczkowski, Maja Sliskovic, Marco Schmidt 0002. 1152-1156 [doi]
• Recommendation of Best Practices for Industrial Agent Systems based on the IEEE 2660.1 StandardPaulo Leitão, Thomas I. Strasser, Stamatis Karnouskos, Luis Ribeiro 0001, José Barbosa, Victor K. L. Huang. 1157-1162 [doi]
• Resilient Consensus-based Economic Dispatch Strategy for Power Security MonitoringXiang Zheng, Qiwei Du, Haiyuan Wang, Jingpei Wang. 1163-1168 [doi]
• Simulation Components in GazeboIan Peake, Joseph La Delfa, Ronal Bejarano, Jan Olaf Blech. 1169-1175 [doi]
• Smart Valve Detection System for Water Distribution NetworksRakiba Rayhana, Yutong Jiao, Zhila Bahrami, Zheng Liu 0002, Angie Wu, Xiangjie Kong 0003. 1176-1181 [doi]
• SSL-SP: A Semi-Supervised-Learning-Based Stream Partitioning Method for Scale Iterated Scheduling in Time-Sensitive NetworksJingzheng Tu, Qimin Xu, Lei Xu, Cailian Chen. 1182-1187 [doi]
• Statistical analysis of execution time profile for temporal validation of a distributed hard real-time systemArpitha Prabhakara, Benjamin Steinwender, Wilfried Elmenreich. 1188-1192 [doi]
• Survival Time-aware Dynamic Multi-connectivity for Industrial Control ApplicationsDavid Ginthör, Marie-Theres Suer, Maximilian Schüngel, René Guillaume, Hans D. Schotten. 1193-1199 [doi]
• The Effects of Brightness Difference on Visual Perception of CharactersSiyu Gao, Haiyan Wang, Chengqi Xue. 1200-1204 [doi]
• Tunnelling and Mirroring Operational Technology Data with IP-based MiddlewaresPatrick Denzler, Daniel Ramsauer, Wolfgang Kastner. 1205-1210 [doi]
• Vibration Measurement and Visualization in Semiconductor AMHS on the basis of IoTThomas Wagner, Jonathan Seitz, Germar Schneider. 1211-1216 [doi]
• Development of Aerospace Power System Laboratory for Advanced Research and Undergraduate EducationTao Lei, Xiaobin Zhang, Jing Chang. 1219-1226 [doi]
• E-Learning in Industrial Electronics during Covid-19Larisa Dunai, Joao Martins, Kazuhiro Umetani, Oscar Lucia, Yousef Ibrahim, Gayan Kahandawa Appuhamillage. 1227-1233 [doi]
• High precision, geometry independent analytical method for self-inductance calculation in planar coilsAndreia Raquel S. Faria, Luís Silvino Marques, João Gaspar, Filipe Serra Alves, Jorge Miguel N. S. Cabral. 1234-1239 [doi]
• Relationship between Trends, Job Profiles, Skills and Training Programs in the Factory of the FutureJoseane Pontes, Carla A. S. Geraldes, Florbela P. Fernandes, Lucas Sakurada, Ann Lilith Rasmussen, Lasse Christiansen, Sabine Hafner-Zimmermann, Kieran Delaney, Paulo Leitão. 1240-1245 [doi]
• Telepresence robot, nano-computers and advanced cameras as educational toolsJulien Marot, Michel Bensoam. 1246-1251 [doi]
• Development of a Walking Promotion Device using Arm Swing Induced by Parametric Excitation : Second report: Design of second prototypeKazuaki Yamada, Sho Yokota, Akihiro Matsumoto, Daisuke Chugo, Hiroshi Hashimoto. 1255-1260 [doi]
• Leveraging machine learning approaches to estimate the impact of thermostat setpoints on individual household gas consumptionJueming Liu, Rik van der Vlist, Ellissa Verseput. 1261-1266 [doi]
• Lifetime-Oriented Control Strategies for Hybrid Energy Storage Systems in an Islanded MicrogridNazli Cinay, Tobias Häring, Argo Rosin, Tarmo Korõtko, Roya Ahmadiahangar, Helmuth Biechl. 1267-1272 [doi]
• Respiratory control design to improve body haemoglobin levelsMarcos Cevallos, Abraham Plua, Javier Urquizo. 1273-1279 [doi]
• Computationally Efficient Set-based Predictive Control for Grid-tied InvertersRenato Babojelic, Sandor Iles, Viktor Sunde, Jadranko Matusko. 1283-1288 [doi]
• Design of a Model Predictive Control for a Boost Type Matrix ConverterAhmad Rammal, Hadi Y. Kanaan. 1289-1296 [doi]
• Sequence-Frame Coupling Admittance Analysis and Stability of VSC Connected to Weak GridYin Chen, Lie Xu. 1297-1303 [doi]
• Laser Distance Meter and LIDAR Demonstrator Module for Teaching of SensorsM. Novak, S. Nemcova, P. Pisarik. 1307-1312 [doi]
• Energy Routers in Transactive Energy CommunitiesJoão F. A. Martins, Gonçalo Santos, Vitor Fernão Pires, Anabela Gonçalves Pronto. 1315-1319 [doi]
• Modulation strategy and control of Modular Cascade H-Bridge Converters as Input-side of a Multi-port Smart TransformerSelene Sánchez-Cruz, Enrique Romero-Cadaval, Begoña Montes Cabrera, Eva González Romera, María Isabel Milanés-Montero, Fermín Barrero-González. 1320-1325 [doi]
• A Novel Fault Tolerant Smart System for BLDC motor based Electric VehiclesAshish Kumar Mohapatra, A. V. Ravi Teja. 1329-1334 [doi]
• Anisotropy-based Sensorless Control for Electrical Drives - Part I: Basic PrincipleQing Chen, Qi Li, Peter Stolze, Ralph Kennel, Dierk Schröder. 1335-1340 [doi]
• Current Trajectory-Based Fault Detection and Fault Tolerant Control for Three-phase Induction DrivesMahdi Tousizadeh, Hang Seng Che, Nasrudin Abd. Rahim. 1341-1347 [doi]
• Generic loss minimization for nonlinear synchronous machines by analytical computation of optimal reference currents considering copper and iron lossesChristoph H. Hackl, Julian Kullick, Niklas Monzen. 1348-1355 [doi]
• Nine-Phase-based Fractional-Slot Winding Layouts for Integrated EV On-board Battery ChargersMohamed Y. Metwly, Mahmoud S. Abdel-Majeed, Ahmed Hemeida, Ayman S. Abdel-Khalik, Shehab Ahmed. 1356-1361 [doi]
• Symmetrical Six-Phase Induction Machines: A Solution for Multiphase Direct Control StrategiesAngel González Prieto, Ignacio Gonzalez Prieto, Alejandro G. Yepes, Mario J. Durán, Jesús Doval-Gandoy. 1362-1367 [doi]
• Direct Active and Reactive Power Control for Grid-Connected PEC9 Inverter Using Finite Control Set Model Predictive MethodMohammad Babaie, Majid Mehrasa, Kamal Al-Haddad. 1371-1376 [doi]
• On the potential of parallel multilevel Current Source Inverter using SiC devices for renewable applicationsLouis-Alexis Gomez, Luis Gabriel Alves Rodrigues, Guillaume Gateau, Sébastien Sanchez. 1377-1382 [doi]
• Z Packed U-cell (ZPUC) topology, configuration of single DC Source single-phase and three-phase Multilevel ConverterSaeed Arazm, Kamal Al-Haddad. 1383-1388 [doi]
• Adaptive Signal Filtering Platform for a CPS/IoT EcosystemHaris Isakovic, Stefan Dangl, Zlatan Tucakovic, Radu Grosu. 1391-1396 [doi]
• AI-Supported Marketplace For Industrial CapabilitiesEric Brandt, Felix Brandt 0003, Konstantin Clemens, Dirk Reichelt. 1397-1402 [doi]
• Control of heterogenous AMHS in semiconductor industry under consideration of dynamic transport carrier transfersPatrick Boden, Sebastian Rank, Thorsten Schmidt. 1403-1408 [doi]
• Investigation of Predictive Maintenance for Semiconductor Manufacturing and its Impacts on the Supply ChainDaniel Fischer, Patrick Moder, Hans Ehm. 1409-1416 [doi]
• Sensors data fusion for smart decisions making: A novel bi-functional system for the evaluation of sensors contribution in classification problemsFeryel Zoghlami, Marika Kaden, Thomas Villmann, Germar Schneider, Harald Heinrich. 1417-1423 [doi]
• Smart Platform for Rapid Prototyping: Solutions in the Dilemma of Flexibility and StandardizationSabrina Anger, Felix Klingert, Volker Häublein, Markus Pfeffer, Martin Schellenberger. 1424-1431 [doi]
• Using representative process flows for simulation model simplificationIgor Stogniy, Wolfgang Scholl. 1432-1437 [doi]