Abstract is missing.
- Non-Schedulability Conditions for Off-line Scheduling of Real-Time Systems Subject to Precedence and Strict Periodicity ConstraintsPatrick Meumeu Yomsi, Yves Sorel. [doi]
- Response-Time Analysis of tasks with offsetsKarim Traore, Emmanuel Grolleau, Ahmed Rahni, Michaël Richard. [doi]
- PLC Communication using PROFINET: Experimental Results and AnalysisMarco Antolovic, Kristen Acton, Naveen Kalappa, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury. [doi]
- Adding Synchronous Scheduling to CORBA-RTIsidro Calvo, Luís Almeida. 1-8 [doi]
- A Clone-Pair Approach for the Determination of the Itinerary of Imprecise Mobile Agents with Firm DeadlinesLuciana Rech, Carlos Montez, Rômulo Silva de Oliveira. 9-15 [doi]
- Improvements on Ethernet LAN Network Infrastructure for Industrial Automation: a Case StudyPaulo S. Motta Pires, Ivano Miranda dos Anjos. 16-22 [doi]
- A Simple Linear Velocity Estimator for High-Precision Motion ControlYuxin Su, Chunhong Zheng, Peter C. Müller. 23-29 [doi]
- Formal modelling and evaluation of the data transfer phase of the ACL links on the WPAN BluetoothTarik Khoutaif, Guy Juanole. 30-37 [doi]
- A Stochastic Petri Net Model for the Simulation Analysis of the IEEE 802.11e EDCA Communication ProtocolRicardo Moraes, Paulo Portugal, Francisco Vasques. 38-45 [doi]
- Evaluating the Timeliness of Bluetooth ACL Connections for the Wireless Transmission of MIDIPaulo Bartolomeu, José Alberto Fonseca, Paulo Maria Rodrigues, Luís Miguel Girão. 46-53 [doi]
- Using Dual-Radio Nodes to Enable Quality of Service in a Clustered Wireless Mesh NetworkUrban Bilstrup, Katrin Bilstrup, Bertil Svensson, Per-Arne Wiberg. 54-61 [doi]
- Trampoline An Open Source Implementation of the OSEK/VDX RTOS SpecificationJean-Luc Béchennec, Mikaël Briday, Sébastien Faucou, Yvon Trinquet. 62-69 [doi]
- Memory-Aware Feedback Scheduling of Control TasksSven Gestegard Robertz, Dan Henriksson, Anton Cervin. 70-77 [doi]
- An Architecture for Runtime State Restoration after Transient Hardware-Faults in Redundant Real-Time SystemsMartin Skambraks. 78-85 [doi]
- A flexible method to tolerate value sensor failuresAlain Girault, Huafeng Yu. 86-93 [doi]
- Multi-sensor electrode setup verification and diagnostics system for EDM OperationBeng Siong Lim, Geok Hong Phua, Leck Leng Aw, ZhongQiang Ding, Hao Zeng, Hao He. 94-101 [doi]
- Los-Cost Avionics System for Ultra-Light AircraftsOndrej Spinka, Jan Krakora, Michal Sojka, Zdenek Hanzálek. 102-109 [doi]
- Data Collection and Feature Extraction for a Smart Ward ApplicationJit Biswas, Victor Foo Siang Fook, Qiang Qiu, Maniyeri Jayachandran, Aung Aung Phyo Wai, Pham Viet Thang, That Mon Htwe. 110-115 [doi]
- A micro-fluidic level sensing and dispensing system for large-scale stem cell experimentationsSeth Yang En Tan, Eng Soon Loh, Toon Tien Foo, Woon Shin Chong, Chum Mok Puah, Beng Siong Lim. 116-123 [doi]
- Operating Systems Portability: 8 bits and beyondHugo Marcondes, Arliones Stevert Hoeller, Lucas Francisco Wanner, Antônio Augusto Fröhlich. 124-130 [doi]
- A Framework for Fault Tolerant Real Time Systems Based on Reconfigurable FPGAsManuel G. Gericota, Luís F. Lemos, Gustavo R. Alves, Mario M. Barbosa, José M. Ferreira. 131-138 [doi]
- A Modular Control Architecture for a Small Electric VehicleF. Santos, J. Trovao, A. Marques, Paulo Pedreiras, Joaquim Ferreira, Luís Almeida, M. Santos. 139-144 [doi]
- Empirical Evaluation of SysML through the Modeling of an Industrial Automation UnitMarcos Vinicius Linhares, Alexandre Jose da Silva, Rômulo Silva de Oliveira. 145-152 [doi]
- Proactive Computing in Process Monitoring: Information Agents for Operator SupportAntti Pakonen, Teppo Pirttioja, Ilkka Seilonen, Teemu Tommila. 153-158 [doi]
- A Generic Information Model for an XML-based Device Profile of PumpsJ. Muller, U. Epple. 159-166 [doi]
- Framework for Building Supervisory Systems in Mobile DevicesReiner F. Perozzo, Carlos Eduardo Pereira. 167-172 [doi]
- Normalization of Industrial Machinery with Embedded Devices and SOAVirgilio Gilart-Iglesias, Francisco Maciá Pérez, Francisco José Mora-Gimeno, José Vicente Berná-Martínez. 173-180 [doi]
- Outdoor Localisation in a Wireless LANSalvatore Cavalieri. 181-188 [doi]
- Trial Implementation of a Wireless Human Machine Interface to Field DevicesMogens Mathiesen, R. Indergaard, H. Vefling, Niels D. Aakvaag. 189-193 [doi]
- Verification of The Minimum Cost Forwarding Protocol for Wireless Sensor NetworksWilliam D. Henderson, Steven Tron. 194-201 [doi]
- Simulation Analysis of the IEEE 802.11e EDCA Protocol for an Industrially-Relevant Real-Time Communication ScenarioRicardo Moraes, Paulo Portugal, Francisco Vasques. 202-209 [doi]
- Nano Control Algorithm for Grinding and Polishing Aspherical SurfaceHyungTae Kim, HaeJeong Yang, SungChul Kim. 210-216 [doi]
- State Feedback Control via Positive Invariance for Max-plus Linear Systems using *-algorithmMourad Ahmane, Laurent Truffet. 217-224 [doi]
- A Model for PLC Implementation of Supervisory Control of Discrete Event SystemsAgnelo Denis Vieira, José Eduardo Ribeiro Cury, Max Hering de Queiroz. 225-232 [doi]
- Comparing dispatching rules in dynamic hybrid flow shopsCarlos Andrés, Pedro Gomez, José Pedro García-Sabater. 233-239 [doi]
- A Heuristics-based Advanced Planning and Scheduling System with Bottleneck Scheduling AlgorithmTay Jin Chua, F. Y. Wang, Tian Xiang Cai, Xiao-Feng Yin. 240-247 [doi]
- Proposal of Risk Communications Supporting Method in Multiplex Risk CommunicatorHiroshi Yajima, Shinichi Matsumoto, Ryoichi Sasaki. 255-260 [doi]
- Distributed Integrated Scheduling in Automated Manufacturing Systems with Transient Machine FailuresHorst F. Wedde, Sanjeev K. Taneja, Sebastian Lehnhoff, Michael ten Hompel, D. Liekenbrock, S. Libert. 261-269 [doi]
- A simple method for guaranteed deadline of periodic messages in 802.15.4 cluster cells for control automation applicationsJackson Francomme, Gilles Mercier, Thierry Val. 270-277 [doi]
- Analysis of Duty Cycle Adaptation in Wireless Sensor NetworksMario Neugebauer, Joern Ploennigs, Klaus Kabitzsch. 278-285 [doi]
- Adjustable Voltage Sensors for Power Supply Chains in Passive UHF RFID TranspondersR. Morales-Ramos, Juan A. Montiel-Nelson, H. Milosiu, R. Berenguer, A. Garcia-Alonso. 286-291 [doi]
- Implementing Business Rules on Sensor NodesMihai Marin-Perianu, T. J. Hofmeijer, Paul J. M. Havinga. 292-299 [doi]
- A Component Framework for Wireless Sensor and Actor NetworksManuel Díaz, Daniel Garrido, Luis Llopis, Bartolomé Rubio, José M. Troya. 300-307 [doi]
- An Improved Reduced Set Method to Control the Run-time Complexity of SVM in Wireless Sensor NetworksMingqing Hu, Andrea Boni. 308-313 [doi]
- Estimating Distances Using Neighborhood IntersectionCarsten Buschmann, Dennis Pfisterer, Stefan Fischer. 314-321 [doi]
- Function Blocks for Fieldbus DiagnosticsHassan Kaghazchi, Ronan Joyce, Donal Heffernan. 322-327 [doi]
- Redundancy Performance of Virtual Network SolutionsFabian Koch, Kai T. Hansen. 328-332 [doi]
- Analysis of Ethernet-based safe automation networks according to IEC 61508Alberto Elia, Luca Ferrarini, Carlo Veber. 333-340 [doi]
- Dedicated vs. Shared Networks for Safety and Controls: An analysis of the trade-offs involvedBradley Triden, Siddharth Mantri, Kyle Schroeder, Aditya Thomas, James R. Moyne, Dawn M. Tilbury. 341-347 [doi]
- Integrating Inaccessibility Control and Timer Management in CANELyJosé Rufino, Paulo Veríssimo, Carlos Almeida, Guilherme Arroz. 348-355 [doi]
- Synthesis of Distributed Controllers by Means of a Monolithic ApproachDirk Missal, Hans-Michael Hanisch. 356-363 [doi]
- Exploiting causal structure in the refined diagnosis of condition systemsJeffrey Ashley, Lawrence E. Holloway. 364-371 [doi]
- Optimizing Quality of Control in Networked Automation Systems using Probabilistic ModelsJürgen Greifeneder, Georg Frey. 372-379 [doi]
- Evaluation of Response Time in Ethernet-based Automation SystemsGaelle Marsal, Bruno Denis, Jean-Marc Faure, Georg Frey. 380-387 [doi]
- IEC 61499 Model for Avionics Distributed Fuel Systems with Networked Embedded Holonic ControllersCarlos C. Insaurralde, Miguel A. Seminario, Juan F. Jimenez, Jose M. Giron-Sierra. 388-396 [doi]
- Feasibility Intervals for Fixed-Priority Real-Time Scheduling on Uniform MultiprocessorsLiliana Cucu, Joël Goossens. 397-404 [doi]
- Execution Overrun Management for Fixed-Priority Preemptive Scheduling of Sporadic Graph TasksLamine Bougueroua, Hui Xue Zhao, Laurent George, Serge Midonnet. 413-420 [doi]
- Towards New Methods for Developing Real-Time Systems: Automatically Deriving Loop Bounds Using Machine LearningDimitar Kazakov, Iain Bate. 421-428 [doi]
- Experimental analysis to estimate jitter in PROFINET IO Class 1 networksPaolo Ferrari, Alessandra Flammini, Daniele Marioli, Andrea Taroni, Francesco Venturini. 429-432 [doi]
- Use of Timed Automata Models in the Design of Real-time Control Network ElementsMargaret Naughton, Donal Heffernan, Gabriel Leen. 433-436 [doi]
- Profinet IO-Device Emulator based on the Man-in-the-middle AttackMichel Baud, Max Felser. 437-440 [doi]
- Performance of an Application Layer Protocol for Wireless Industrial CommunicationsIacopo Carreras, Daniele Miorandi, Stefano Vitturi. 441-444 [doi]
- UPnP Compression for IP based Field Devices in Building AutomationStefan Knauth, D. Kaslin, Rolf Kistler, Alexander Klapproth. 445-448 [doi]
- Towards a robust real-time wireless link in a land monitoring applicationLucia Lo Bello, Giordano A. Kaczynski, Thomas Nolte. 449-452 [doi]
- Towards stochastic response-time of hierarchically scheduled real-time tasksGiordano A. Kaczynski, Lucia Lo Bello, Thomas Nolte. 453-456 [doi]
- Towards Plug and Play in Home and Building Automation NetworksGeorg Neugschwandtner. 461-464 [doi]
- Discussion of Aspects in Energy Management with Demand Response System KNIVESS. Ishida, C. Roesener, H. Nishi, J. Ichimura. 465-468 [doi]
- Embedded Model Control: Application to Web Winding. Part I: ModellingEnrico S. Canuto, Fabio Musso. 477-484 [doi]
- Embedded Model Control: Application to Web Winding. Part II: Digital ControlEnrico S. Canuto, Fabio Musso. 485-492 [doi]
- Embedded Model Control: Application to Interferometric Metrology LinesEnrico S. Canuto, Fabio Musso. 493-500 [doi]
- High-Precision Five-Axis Machine for High-Speed Material Processing Using Linear Motors and Parallel-Serial KinematicsSameh Refaat, Jacques M. Hervé, Saeid Nahavandi, Hieu Trinh. 501-506 [doi]
- Innovation ScienceAndrew Kusiak. 507-514 [doi]
- Accessibility Analysis for Automatic Inspection Using Bounding Volume HierarchiesB. J. Alvarez, P. Fernandez, S. Mateos, J. C. Rico, C. M. Suarez. 515-522 [doi]
- Constraints Evaluation and Working Methodology for Laser Scanning of Free-Form SurfacesP. Fernandez, B. J. Alvarez, J. C. Rico, D. Blanco, G. Valiño. 523-530 [doi]
- Delay Compensator: an Approach to Reduce the Variable Sampling to Actuation Delay Effect in Distributed Real-time Control SystemsAna Antunes, Fernando Morgado Dias, José Vieira, Alexandre Mota. 531-536 [doi]
- Adding Function Blocks of IEC 61499 Semantic Description to Automation ObjectsOmar J. López Orozco, Jose L. Martinez Lastra. 537-544 [doi]
- Control Architecture for Reconfigurable Manufacturing Systems: the PABADIS PROMISE approachLuca Ferrarini, Carlo Veber, Arndt Lüder, Jörn Peschke, Athanasios P. Kalogeras, John V. Gialelis, J. Rode, D. Wunsch, V. Chapurlat. 545-552 [doi]
- Three Layered Business Process Architecture for Workflow CooperationRyosuke Saga, Naoto Okada, Hiroshi Tsuji. 553-558 [doi]
- Integrating Manufacturing Equipments Using a Shop Floor Control SystemC. D Onofrio, M. Bruccoleri, U. La Commare. 559-566 [doi]
- A Study on Multi-Agent based Resource Allocation Mechanism for Automated Enterprise ContractingToshiya Kaihara, Susumu Fujii. 567-573 [doi]
- Collaborative Continuous Replenishment Planning Process Implementation Utilizing Web Services, Product Ontologies and Workflow Management SystemsJohn V. Gialelis, Athanasios P. Kalogeras, A. Kaklis, Stavros A. Koubias. 574-581 [doi]
- Operating System Support for Data Acquisition in Sensor NetworksLucas Francisco Wanner, Arliones Stevert Hoeller, Augusto Born de Oliveira, Antônio Augusto Fröhlich. 582-585 [doi]
- A simulation study on dropping tendencies of an ad-hoc wireless networkChristos D. Antonopoulos, Antonis Athanasopoulos, Stavros A. Koubias. 586-589 [doi]
- Advance in Multiply Sectioned Bayesian Networks: Sensor Network Practitioners PerspectiveY. Xiang, K. Zhang. 590-593 [doi]
- Giving neurons to sensors. QoS management in wireless sensors networksJulio Barbancho, Carlos León, Francisco Javier Molina, Antonio Barbancho. 594-597 [doi]
- Efficient Full Duplex Links for Long Distance Wireless Mesh NetworksLucia Lo Bello, Orazio Mirabella. 598-601 [doi]
- Relative Positioning System Using Simultaneous Round Trip Time of Flight MeasurementsCarlos De Marziani, Jesús Ureña, Manuel Mazo, Álvaro Hernández, Juan Jesús García, Ana Jiménez, María del Carmen Pérez, A. Ochoa, Jose M. Villadangos. 602-605 [doi]
- Process Plant Reference Model for CommunicationKai T. Hansen. 606-610 [doi]
- Application-Oriented System Design as an Embedded Systems Development Strategy: a critical analysisDanillo Moura Santos, Roberto de Matos, Antônio Augusto Fröhlich, Rafael Luiz Cancian. 615-618 [doi]
- Processor Expert Enhances Matlab Simulink Facilities for Embedded Software Rapid DevelopmentRoman Bartosinski, Zdenek Hanzálek, Libor Waszniowski, Petr Struzka. 625-628 [doi]
- Low-Cost Optical Indoor Localization System for Mobile Objects without Image ProcessingRalf Salomon, Matthias Schneider, Daniel Wehden. 629-632 [doi]
- Systematic Design and Implementation of Distributed Controllers in Industrial AutomationValeriy Vyatkin, Martin Hirsch 0002, Hans-Michael Hanisch. 633-640 [doi]
- An Algorithm for Siemens STL representation in TNCESAndrei Lobov, Corina Popescu, Jose L. Martinez Lastra. 641-647 [doi]
- Diner-Waiter Pattern for Time Critical ServicesHao He, Anton J. R. Aendenroomer, Beng Siong Lim. 648-654 [doi]
- Re-evaluating Event-Triggered and Time-Triggered SystemsJason J. Scarlett, Robert W. Brennan. 655-661 [doi]
- SFC inside IEC 61499Matthias Riedl, Christian Diedrich, Frank Naumann. 662-666 [doi]
- Modelling and Simulation of Scheduling Policies Implemented in Ethernet Switch by Using Coloured Petri NetsBelynda Brahimi, Christophe Aubrun, Eric Rondeau. 667-674 [doi]
- Implementation of an Internet-controlled system under variable delaysAlexandre Seuret, M. Termens-Ballester, A. Toguyeni, S. El Khattabi, Jean-Pierre Richard. 675-680 [doi]
- Robust Fault Isolation Filter Design for Networked Control SystemsShanbin Li, Dominique Sauter, Christophe Aubrun. 681-688 [doi]
- Information Packets and MPC Enable Fault-tolerance in Network ControlSupat Klinkhieo, Chandra Kambhampati, Ronald J. Patton. 689-694 [doi]
- Fault Tolerance Aspects in Networked Multi-area Power SystemsAlessandro Casavola, Giuseppe Franzè, Michela Sorbara. 695-702 [doi]
- Using Data Confluences in a Distributed Network with Social Monitoring to Identify Fault ConditionsJonathan M. Aitken, Tim Clarke. 703-710 [doi]
- Speed Sensorless Vector Control of Induction Motors Based on Robust Adaptive Variable Structure Control LawOscar Barambones, Aitor J. Garrido, F. J. Maseda, P. Alkorta. 711-718 [doi]
- A Helicopter Control based on Eigenstructure AssignmentN. Antequera, Matilde Santos, Jesús Manuel de la Cruz. 719-724 [doi]
- Finite Precision Controllers for Robust Pole Assignment of Linear Systems with Nonlinear Uncertain StructureFotis N. Koumboulis, Maria P. Tzamtzi, M. G. Skarpetis. 725-732 [doi]
- Disturbance Rejection of General Linear Neutral Time Delay Systems, via Measurement Output FeedbackFotis N. Koumboulis, George E. Panagiotakis. 733-742 [doi]
- Professional designers adaptations of IEC 61499 to their individual work practicesMika Strmman, Seppo Sierla, Jukka Peltola, Kari Koskinen. 743-749 [doi]
- Comparative Study of Using CNet, IEC 61499, and Statecharts for Behavioral Models of Real-time Control ApplicationsArastoo Barji, Nils H. Hagge, Bernardo Wagner. 750-757 [doi]
- Towards a Service-Oriented IEC 61499 compliant Engineering Support EnvironmentKleanthis Thramboulidis, Giannis Koumoutsos, G. Doukas. 758-765 [doi]
- Combination of UML Modeling and the IEC 61499 Function Block Concept for the Development of Distributed Automation SystemsSeno Panjaitan, Georg Frey. 766-773 [doi]
- Modelling and Verification of IEC 61499 Applications using PrologVictor Dubinin, Valeriy Vyatkin, Hans-Michael Hanisch. 774-781 [doi]
- A Framework for Component Based Distributed Control Software Development Using IEC 61499Goran Cengic, Oscar Ljungkrantz, Knut Akesson. 782-789 [doi]
- An Agent-Oriented Design Methodology for RFID Improved Manufacturing ControlA. Garcia, A. Cenjor, Y. Chang, M. de la Fuente. 790-796 [doi]
- Towards an Agent-based Simulation Tool for Manufacturing SystemsNancy Ruiz, Adriana Giret, Vicente J. Botti. 797-804 [doi]
- An Initial Task Assignment Method for Autonomous Distributed Vehicle Systems with Finite Buffer CapacityYusuke Morihiro, Toshiyuki Miyamoto, Sadatoshi Kumagai. 805-812 [doi]
- Automated Vehicles Work Planning in Flexible Manufacturing SystemsWojciech Muszynski, Zbigniew A. Banaszak, Izabela Tomczuk-Pirog. 813-818 [doi]
- Petri net based Methodology for the Development of Collaborative Production SystemsPaulo Leitão, Armando W. Colombo. 819-826 [doi]
- A Control System for Multi-Robotic CommunitiesJan Chudoba, Libor Preucil, Roman Mázl. 827-832 [doi]
- Robot Path Planning using Particle Swarm Optimization of Ferguson SplinesMartin Saska, Martin Macas, Libor Preucil, Lenka Lhotská. 833-839 [doi]
- Robust Contouring Control for Multi-Axis Feed Drive SystemsNaoki Uchiyama, Shoji Takagi, Shigenori Sano, Kazuo Yamazaki. 840-845 [doi]
- Visual Based Predictive Control for a Six Degrees of Freedom RobotP. A. Fernandes Ferreira, João Rogério Caldas Pinto. 846-853 [doi]
- LPV Gain-Scheduled PID for Distributed Motion Control via EthernetYolanda Bolea, Antoni Grau, Juan Gamiz-Caro. 854-861 [doi]
- Revisiting IMC based design of PI/PID controllers for FOPTD ModelsRamon Vilanova. 862-869 [doi]
- Practical aspects of PID controllers: An industrial experienceJuan J. Gude, E. Kahoraho, Josu Etxaniz. 870-878 [doi]
- Rotary Cement Kiln Control for Reducing NOx Emissions to AtmosphereFragiskos A. Batzias. 879-886 [doi]
- Investigating Connector Faults in the Time-Triggered ArchitecturePhilipp Peti, Roman Obermaisser, Harald Paulitsch. 887-896 [doi]
- Automatic Parameter Identi cation in FlexRay based Automotive Communication NetworksEric Armengaud, Andreas Steininger, Martin Horauer. 897-904 [doi]
- Integration of networked subsystems in a resource constrained environmentThomas Nolte, Hans A. Hansson, Lucia Lo Bello. 905-912 [doi]
- Towards a File System Interface for Mobile Resources in Networked Embedded SystemsNeil C. Audsley, R. Gao, Ameet Patil. 913-920 [doi]
- A Simulation Case Study of the new IEEE 802.11e HCCA mechanism in Industrial Wireless NetworksHenning Trsek, Jürgen Jasperneite, Sugun Pradeep Karanam. 921-928 [doi]
- Maintenance integration in a control-monitoring architecture based on Petri net with objects. Application to a flexible manufacturing systemEduardo De Freitas Rocha Loures, Marco Antonio Busetti de Paula, Jean-Claude Pascal. 929-936 [doi]
- Decision Support Systems Based on CLP Approach in SMEsIzabela Tomczuk-Pirog, Robert Wójcik, Zbigniew A. Banaszak. 937-942 [doi]
- Implementation of a Simulation-Based Optimizer for Semiconductor Wafer FactoriesOliver Rose. 943-949 [doi]
- New Results on Testing Modularity of Local Supervisors using AbstractionsPatrcia N. Pena, José E. R. Cury, Stéphane Lafortune. 950-956 [doi]
- Using MILP for UAVs Trajectory Optimization under Radar Detection RiskJosé Jaime Ruz, Orlando Arevalo, Jesús Manuel de la Cruz, Gonzalo Pajares. 957-960 [doi]
- Automata Based Modeling for Batching and Mixing Plants for ConcreteVasileios Deligiannis, Stamatis Manesis. 961-964 [doi]
- Embedded Model Control and dynamic simulationEnrico S. Canuto, Tommaso D Anna. 965-968 [doi]
- Implementing Non-Linear Strategies for PID in IEC 61131-3 ST LanguageN. Iriondo, M. Marcos, E. Estevez, D. Orive. 969-972 [doi]
- A proposed framework for fine-tuning/training a fuzzy controllerAnila Mjeda, Brendan Jackman, Gabriel Leen. 973-976 [doi]
- Processing Algorithm for obtaining the Impulse Response in a MIMO Ultrasonic SystemA. Ochoa, Jesús Ureña, Álvaro Hernández, Manuel Mazo, Carlos De Marziani, María del Carmen Pérez. 977-980 [doi]
- Reconfigurable Logic Control Using IEC 61499 Function BlocksE. Emanuel Almeida, Jonathan E. Luntz, Dawn M. Tilbury. 981-984 [doi]
- MPC Applied to Motion Control of an Underactuated Brachiation RobotVinicius Menezes de Oliveira, Walter Fetter Lages. 985-988 [doi]
- An IEC61499 Execution Environment for an aJile-based Field DeviceKleanthis Thramboulidis, Nikolaos Papakonstantinou. 989-992 [doi]
- Towards Squeezing Forces Control for Cooperating ManipulatorsMaria P. Tzamtzi, Fotis N. Koumboulis. 993-996 [doi]
- Self-tuning Control Using External Integrator Loop for a Synchronous Generator Excitation SystemIoan Filip, Octavian Prostean, Iosif Szeidert, Cristian Vasar, Gabriela Prostean. 997-1000 [doi]
- Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known PlantL. Rubio, Manuel de la Sen, Asier Ibeas. 1001-1004 [doi]
- Discrete-Time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive ControlL. Rubio, Manuel de la Sen, Asier Ibeas. 1005-1008 [doi]
- Fault Tolerance for Manufacturing ComponentsDiego Marcos-Jorquera, Francisco Maciá Pérez, Virgilio Gilart-Iglesias, Alfonso Capella-D Alton. 1013-1016 [doi]
- DSAAR: A Distributed Software Architecture for Autonomous RobotsPedro F. Santana, Vasco Santos, José Barata. 1017-1020 [doi]
- Experimental research of probabilistic localization of service robots using range image data and indoor GPS systemHyeyeon Chang, JongSuk Choi, Munsang Kim. 1021-1027 [doi]
- Improving Self-Localisation of Mobile Robots Based on Asynchronous Monte-Carlo Localization MethodLeopoldo Armesto, Josep Tornero, L. Domenech. 1028-1035 [doi]
- Simultaneous Localization and Map Building by Integrating a Cache of FeaturesJorge Costa, Filipe Dias, Rui Araújo. 1036-1043 [doi]
- Visual - Force Control and Structured Light Fusion to Improve Recognition of Discontinuities in SurfacesJorge Pomares, Pablo Gil, Gabriel J. García, Fernando Torres. 1044-1050 [doi]
- Relaxed (m, k)-firm Constraint to Improve Real-time Streams Admission Rate under Non Pre-emptive Fixed Priority SchedulingJian Li, Yeqiong Song. 1051-1060 [doi]
- Experimental Determination of Real Time Peer to Peer Communication Characteristics of EtherNet/IPNaveen Kalappa, Kristen Acton, Marco Antolovic, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury. 1061-1064 [doi]
- Repeater vs. Bridge-Based Hybrid Wired/Wireless PROFIBUS Networks: a Comparative Performance AnalysisPaulo Sousa, Luis Lino Ferreira, Mário Alves. 1065-1072 [doi]
- A wireless traffic smoother for soft real-time communications over IEEE 802.11 industrial networksLucia Lo Bello, Giordano A. Kaczynski, Francesco Sgro, Orazio Mirabella. 1073-1079 [doi]
- Combining an Optimizing Method with a Genetic Algorithm to Solve a Flowshop Scheduling Problem with Additional ResourcesEwa Figielska. 1080-1086 [doi]
- Phi-calculus : A new fuzzy arithmeticHakim Lamara, Laurent Vermeiren, Dominique Roger. 1087-1094 [doi]
- Decomposition of a Greenhouse Fuzzy ModelPaulo Salgado, Paulo Afonso. 1095-1100 [doi]
- GA Applied VRP Solving method for a Cooperative Logistics NetworkTakashi Onoyama, Takuya Maekawa, Sen Kubota, Norihisa Komoda. 1101-1106 [doi]
- ERMIS: A Helicopter Taxi Company Software Support System based on GPS, GSM and Web ServicesG. Goulas, V. Barkayannis, S. Gianoulis, C. Gogos, Panayiotis Alefragis, P. Foundas, Christos Valouxis, Stavros A. Koubias, Efthymios Housos. 1107-1114 [doi]
- The Role of Networked RFID for Driving the UbiquitousRyo Imura. 1115-1118 [doi]
- Networked RFID for use in the Food ChainPeter Jones. 1119-1124 [doi]
- Partitioning of Petri net models amenable for Distributed ExecutionAnikó Costa, Luís Gomes. 1129-1132 [doi]
- Towards an Approach for the Verification of Downtimeless System EvolutionChristoph Sünder, Bernard Favre-Bulle, Valeriy Vyatkin. 1133-1136 [doi]
- An Approach to Swept Volume Generation for NC Machining using Gauss MapSeok-Won Lee. 1137-1140 [doi]
- FPGA-based Implementation of a Correlator for Kasami SequencesMaría del Carmen Pérez, Álvaro Hernández, Jesús Ureña, Carlos De Marziani, Ana Jiménez. 1141-1144 [doi]
- Integration of Multi-Agent Systems: Architectural ConsiderationsMarek Obitko, Vladimír Marík. 1145-1148 [doi]
- Data Integration by considering spatial diversity in an IR barrierJuan Jesús García, Jesús Ureña, Manuel Mazo, Cristina Losada, Álvaro Hernández, Carlos De Marziani, Fernando J. Álvarez. 1149-1152 [doi]
- Routes for Splitting and Merging Maneuvers of Platoon Followers in Urban EnvironmentsFernando Valdés, Felipe Espinosa, AbdelBaset M. H. Awawdeh, Julio Pastor. 1153-1156 [doi]
- Development of Hard-Realtime Control Software for Critical Industrial Automation Tasks using Graphical System POLYGONVera Larionova, Svetlana Larionova. 1161-1164 [doi]
- Specification of Holistic Mechatronic Objects Based on Semantic Web TechnologyUwe Schmidtmann, Gerd von Cölln, Gerhard Kreutz, Jorg Thomaschewski, Rainer Koers, Bodo Wenker. 1165-1168 [doi]
- Variable Pallet Pick-Up for Automatic Guided Vehicles in Industrial EnvironmentsDaniel Lecking, Oliver Wulf, Bernardo Wagner. 1169-1174 [doi]
- SCARA Type Robot Arm with Mechanically Adjustable Compliant JointsHiroaki Seki, Yoshitsugu Kamiya, Masatoshi Hikizu. 1175-1181 [doi]
- A Safe Set Point Supervisor for MIMO ProcessesChristoforos E. Economakos, Fotis N. Koumboulis. 1182-1189 [doi]
- 3D High Precision Tube Bevel Measurement using laser based Rotating ScannerArtzai Picon, Arantza Bereciartua, Jose Angel Gutierrez, Jose Perez. 1190-1197 [doi]
- Applicability of RFID and Agent-Based Control for Product Identification in Distributed ProductionAleksey Bratukhin, Albert Treytl. 1198-1205 [doi]
- GDNET: a Specific Approach to Distributed Input/Output Synchronization for Plastic MachineryPaolo Ferrari, Alessandra Flammini, Daniele Marioli, S. Rosa, Andrea Taroni, C. Cattaneo, Cathryn Manduca. 1206-1213 [doi]
- Vertical Communication from the Enterprise Level to the Factory Floor - Integrating Fieldbus and IP-based NetworksMaxim Lobashov, Thilo Sauter. 1214-1221 [doi]
- Dynamic Topology Management in CANValter Filipe Silva, Joaquim Castro Ferreira, José Alberto Fonseca. 1222-1229 [doi]
- Removing ill-structured arcs in Hierarchical and Concurrent State DiagramsLuís Gomes, Anikó Costa. 1230-1237 [doi]
- Cost-based Deployment Planning for Components in Smart Item EnvironmentsJürgen Anke, Klaus Kabitzsch. 1238-1245 [doi]
- Petri Nets and Java. Real-Time Control of a flexible manufacturing cellRamon Piedrafita Moreno, José Luis Villarroel Salcedo. 1246-1253 [doi]
- VITRAL - A text mode window manager for real-time embedded kernelsManuel Coutinho, Carlos Almeida, José Rufino. 1254-1260 [doi]
- Wake on LAN over Internet as Web ServiceJuan Antonio Gil-Martínez-Abarca, Francisco Maciá Pérez, Diego Marcos-Jorquera, Virgilio Gilart-Iglesias. 1261-1268 [doi]
- Formal Modeling of Function Block Applications Running in IEC 61499 Execution RuntimeGoran Cengic, Oscar Ljungkrantz, Knut Akesson. 1269-1276 [doi]
- UML-based Development Process for IEC 61499 with Automatic Test-case GenerationTanvir Hussain, Georg Frey. 1277-1284 [doi]
- Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499Oliver Hummer, Christoph Sünder, Alois Zoitl, Thomas Strasser, Martijn N. Rooker, Gerhard Ebenhofer. 1285-1292 [doi]
- Component based deployment of industrial control systems: a hybrid scheduling approachMohamed Khalgui, Xavier Rebeuf, Françoise Simonot-Lion. 1293-1300 [doi]
- Applying the IEC-61499 Model to the Shoe Manufacturing SectorMarco Colla, Alessandro Brusaferri, Emanuele Carpanzano. 1301-1308 [doi]
- Design Alternatives in the IEC 61499 Function Block ModelKleanthis Thramboulidis. 1309-1316 [doi]
- Reusing a System Testing Process Using with a ModelHirohisa Furuta, Akira Ishihara, Takayuki Yamaoka. 1317-1320 [doi]
- Moving from Spontaneous to Cooperative/Concurrent R&D in Biotechnology - The Case of BiosensorsFragiskos A. Batzias, Christina G. Siontorou. 1321-1328 [doi]
- Quality and Process Control of Nd: YAG - Laser Welding Using fuzzy Pattern Recognition Techniques for Multisensor SystemsMichael Kuhl, Reimund Neugebauer. 1329-1332 [doi]
- Branching Probabilities Planning of Stochastic Network for Project Duration PlanningKenzo Kurihara, Nobuyuki Nishiuchi, Manabu Nagai, Kazuaki Masuda. 1333-1339 [doi]
- A Formal Method Based Re-Implementation Concept for PLC Programs and Its ApplicationMohammed Bani Younis, Georg Frey. 1340-1347 [doi]
- A Supply Planning Model for Multilevel Assembly Systems Under Random Lead TimesFaicel Hnaien, Alexandre Dolgui. 1348-1351 [doi]