Abstract is missing.
- A severity measurement system for obstructive sleep apnea discrimination using a single ECG signalLili Chen, Xi Zhang, Changyue Song. 1-6 [doi]
- Learning to locomote: Action sequences and switching boundariesRowland O'Flaherty, Magnus Egerstedt. 7-12 [doi]
- Optimal trajectory design for well-conditioned parameter estimationAndrew D. Wilson, Todd D. Murphey. 13-19 [doi]
- Monitoring virtual metrology reliability in a sampling decision systemDaniel Kurz, Cristina DeLuca, Jürgen Pilz. 20-25 [doi]
- Tactical planning of bloodmobile collection systemsEdgar Alfonso, Vincent Augusto, Xiaolan Xie. 26-31 [doi]
- Low-cost coarse airborne particulate matter sensing for indoor occupancy detectionKevin Weekly, Donghyun Rim, Lin Zhang, Alexandre M. Bayen, William W. Nazaroff, Costas J. Spanos. 32-37 [doi]
- Robustly fault tolerant Gough-Stewart platformsJohn E. McInroy. 38-44 [doi]
- Self-recovery control for dependable systemsTri Tran, Quang Phuc Ha. 45-50 [doi]
- Synthesis and optimization of a Bayesian belief network based observation platform for anomaly detection under partial and unreliable observationsWen-Chiao Lin, Humberto E. Garcia. 51-58 [doi]
- Model based unbalance monitoring using augmented observer in rotor systems under the consideration of gyroscopic effectZhentao Wang, Matthias Borsdorf, Stephan Rinderknecht. 59-64 [doi]
- Automation of rapid fault diagnosis in manufacturing systems using multiple fuzzy agentsTerrence P. Fries. 65-70 [doi]
- Exploiting robustness in Petri net-based closed-loop systems to accommodate control specification changesJun Li 0011, MengChu Zhou, Xianzhong Dai. 71-76 [doi]
- A robust production control policy for a multiple-stage production system with inventory inaccuracy and time-delayZheng Wang, Felix T. S. Chan. 77-82 [doi]
- Integrated capacity allocation policies for a production service system with two-class customers and itemsKangzhou Wang, Zhibin Jiang, Guowei Li, Jin Cao. 83-88 [doi]
- Supply demand coordination for building energy savingZhanbo Xu, Qing-Shan Jia, Xiaohong Guan. 89-94 [doi]
- Optimal building energy management using intelligent optimizationYinliang Xu, Kun Ji, Yan Lu, Yuebin Yu, Wenxin Liu. 95-99 [doi]
- Incentive compatible mechanisms for power cut allocation in smart gridsChetan Yadati, Dilpreet Kaur, Narayanaswamy Balakrishnan, Avik Sarkar, Y. Narahari. 100-105 [doi]
- Energy-efficient management of eco-communitiesBing Yan, Peter B. Luh, Biao Sun, Chen Song, Chenhui Dong, Zhongxue Gan, Laurent D. Michel. 106-111 [doi]
- Evaluating feedback systems for residential building energy monitoringWenqi Wendy Guo, Tania Ullah, MengChu Zhou. 112-116 [doi]
- An abstraction layer for controlling heterogeneous mobile cyber-physical systemsTrevor Hanz, Mina Guirguis. 117-121 [doi]
- A comprehensive QoS determination model for Infrastructure-as-a-Service cloudsYunni Xia, MengChu Zhou, Xin Luo, Qingsheng Zhu. 122-127 [doi]
- A next generation collaborative framework for advanced manufacturingJoe Cecil, Raviteja Gunda, Prasad Calyam, S. Seetharam. 128-132 [doi]
- Collaborative virtual environments for orthopedic surgeryJoe Cecil, Parmesh Ramanathan, Vahid Rahneshin, Aditya Prakash, Miguel Pirela-Cruz. 133-137 [doi]
- Storage yard management for transshipment portsXinjia Jiang, Loo Hay Lee, Ek Peng Chew, Kok-Choon Tan. 138-143 [doi]
- Energy-efficient dispatching solution in an automated air cargo terminalWuhua Hu, Jianfeng Mao, Keji Wei. 144-149 [doi]
- A simulation based analysis of production scheduling in a steelmaking and continuous casting plantMaria Pia Fanti, Giorgio Iacobellis, Giuliana Rotunno, Walter Ukovich. 150-155 [doi]
- Correct-by-construction distributed control for multi-vehicle transport systemsElzbieta Roszkowska, Ida Goral. 156-161 [doi]
- Automatic building exterior mapping using multilayer feature graphsYan Lu, Dezhen Song, Yiliang Xu, A. G. Amitha Perera, Sangmin Oh. 162-167 [doi]
- Flexible 3D localization of planar objects for industrial bin-picking with monocamera vision systemAlberto Pretto, Stefano Tonello, Emanuele Menegatti. 168-175 [doi]
- Robust visual measurement planning in multi-robot systemsHamidreza Nourzadeh, John E. McInroy. 176-182 [doi]
- Automatic baseline-sample-selection scheme for baseline predictive maintenanceChun-Fang Chen, Yao-Sheng Hsieh, Fan-Tien Cheng, Hsien-Cheng Huang, Saint-Chi Wang. 183-188 [doi]
- Development of an advanced manufacturing cloud for machine tool industry based on AVM technologyMin-Hsiung Hung, Yu-Chuan Lin, Hsien-Cheng Huang, Min-Hsuan Hsieh, Haw Ching Yang, Fan-Tien Cheng. 189-194 [doi]
- A predictive maintenance system for integral type faults based on support vector machines: An application to ion implantationGian Antonio Susto, Andrea Schirru, Simone Pampuri, Daniele Pagano, Seán F. McLoone, Alessandro Beghi. 195-200 [doi]
- Virtual metrology enabled early stage prediction for enhanced control of multi-stage fabrication processesGian Antonio Susto, Adrian B. Johnston, Paul G. O'Hara, Seán F. McLoone. 201-206 [doi]
- RiskVis: Supply chain visualization with risk management and real-time monitoringRick Siow Mong Goh, Zhaoxia Wang, Xiaofeng Yin, Xiuju Fu, Loganathan Ponnambalam, Sifei Lu, Xiaorong Li. 207-212 [doi]
- Orchestrating the print supply chain in emerging marketsN. Viswanadham, Sowmya Vedula, Rakesh Kulkarni. 213-218 [doi]
- A sustainable building design using geosolar exergy storage technology (GEST)Lowell E. Lingo, Utpal Roy. 219-224 [doi]
- A decentralized optimization method for energy saving of HVAC systemsZhe Liu, Xi Chen, Xingtian Xu, Xiaohong Guan. 225-230 [doi]
- EDISON: An innovative lighting architecture facilitating building automationDario Di Zenobio, Niccolo De Caro, Steffen Thielemans, Kris Steenhaut. 231-236 [doi]
- Fault detection of cooling coils based on unscented Kalman filters and statistical process controlYing Yan, Peter B. Luh, Biao Sun. 237-242 [doi]
- Automation for individualization of Kinect-based quantitative progressive exercise regimenSeung-kook Jun, Suren Kumar, Xiaobo Zhou, Daniel K. Ramsey, Venkat N. Krovi. 243-248 [doi]
- An evaluation of low-cost sensors for smart wheelchairsChad A. Rockey, Eric M. Perko, Wyatt S. Newman. 249-254 [doi]
- Design and fabrication of an assistive device for arm rehabilitation using twisted string systemReza Shisheie, Lei Jiang, Larry E. Banta, Marvin H. Cheng. 255-260 [doi]
- NCC-RANSAC: A fast plane extraction method for navigating a smart cane for the visually impairedX. Qian, C. Ye. 261-267 [doi]
- Moving trajectories and controller synthesis for an assistive device for arm rehabilitationLei Jiang, Reza Shisheie, Marvin H. Cheng, Larry E. Banta, Goudong Guo. 268-273 [doi]
- A mixed integer linear programming approach for multi-degree cyclic multi-hoist scheduling problems without overlappingXin Li, Richard Y. K. Fung. 274-279 [doi]
- A mixed-integer linear programming model for automatic routing decisions in oil production optimizationThiago Lima Silva, Eduardo Camponogara, Alex Furtado Teixeira, Snjezana Sunjerga. 280-285 [doi]
- A computational analysis of nondifferentiable optimization: Applications to production maximization in gas-lifted oil fieldsCaio Merlini Giuliani, Eduardo Camponogara, Agustinho Plucenio. 286-291 [doi]
- Concurrent design and control of automated material handling systemsMaziar Mashaei, Bengt Lennartson. 292-299 [doi]
- Adaptive friction compensation of flexible-joint manipulators with parametric uncertaintiesHicham Chaoui, Pierre Sicard. 300-305 [doi]
- An example of computing the failure-tolerant workspace area for a planar kinematically redundant robotP. S. Naik, Anthony A. Maciejewski, Rodney G. Roberts, Randy C. Hoover, Khaled M. Ben-Gharbia. 306-311 [doi]
- Uncertainty characterization in serial and parallel manipulators using random matrix theoryJavad Sovizi, Venkat N. Krovi. 312-317 [doi]
- Multisensor integrated stair recognition and parameters measurement system for dynamic stair climbing robotsRen C. Luo, Ming Hsiao, Che-Wei Liu. 318-323 [doi]
- Hardware and software architecture of ABBY: An industrial mobile manipulatorEdward Venator, Gregory S. Lee, Wyatt Newman. 324-329 [doi]
- Longitudinal attitude controller design for aircraft landing with disturbance using ADRC/LQRGuilong Zhang, Lingyu Yang, Jing Zhang, Chan Han. 330-335 [doi]
- A real-time optimal control method for swing-free tower crane motionsWim Devesse, Marcus Ramteen, Lei Feng, Jan Wikander. 336-341 [doi]
- An efficient proximity probing algorithm for metrologyFatemeh Panahi, Aviv Adler, A. Frank van der Stappen, Ken Goldberg. 342-349 [doi]
- A sensor-based dual-arm tele-robotic manipulation platformDaniel Kruse, Richard J. Radke, John T. Wen. 350-355 [doi]
- Performance evaluation of knowledge-based kitting via simulationThomas R. Kramer, Zeid Kootbally, Stephen Balakirsky, Craig Schlenoff, Anthony Pietromartire, Satyandra Gupta. 356-361 [doi]
- Event-clustering for real-time data modelingMorad Danishvar, Ali Mousavi, Pedro Angelo Morais de Sousa, Rui Araújo. 362-367 [doi]
- Operation behavior modeling using relation identification and visualization algorithmsKristofer Bengtsson, Bengt Lennartson. 368-373 [doi]
- Stackelberg game formulation of prize competition design for seeking shortest path solutionsTing-Yu Ho, Shi-Chung Chang. 374-379 [doi]
- The information framework for material behavior representationUtpal Roy, Bicheng Zhu, Daniel J. Rice. 380-385 [doi]
- Analysis of multi-product manufacturing systems with homogeneous exponential machinesCong Zhao, Jingshan Li. 386-391 [doi]
- A heuristic algorithm for minimizing total absolute deviation from distinct due dates on a single machineYou Li, Zhibin Jiang, Wenyou Jia. 392-397 [doi]
- Dynamic production control of door manufacturing line at an automotive assembly plantCong Zhao, Yongzhen Lu, Jingshan Li. 398-403 [doi]
- A decomposition method for stochastic partial disassembly line balancing with profit maximizationMohand Lounes Bentaha, Olga Battaïa, Alexandre Dolgui. 404-409 [doi]
- Attribute selection algorithm of data-based scheduling strategy for semiconductor manufacturingFei Qiao, Yumin Ma, Xiang Gu. 410-415 [doi]
- A unified control framework of HVAC system for thermal and acoustic comforts in office buildingYin Zhao, Qianchuan Zhao, Li Xia, Zhijin Cheng, Fulin Wang, Fangting Song. 416-421 [doi]
- Cooperative control of air flow for HVAC systemsShuai Liu, Yushen Long, Lihua Xie, Alexandre M. Bayen. 422-427 [doi]
- A scenario-based predictive control approach to building HVAC management systemsAlessandra Parisio, Marco Molinari, Damiano Varagnolo, Karl Henrik Johansson. 428-435 [doi]
- Event-based optimization with non-stationary uncertainties to save energy costs of HVAC systems in buildingsBiao Sun, Peter B. Luh, Qing-Shan Jia, Bing Yan. 436-441 [doi]
- Model predictive control for HVAC systems - A reviewRoger Kwadzogah, MengChu Zhou, Sisi Li. 442-447 [doi]
- Particle filter based active localization of target and needle in robotic image-guided intervention systemsMark Renfrew, Zhuofu Bai, Murat Cenk Cavusoglu. 448-454 [doi]
- A two-stage approach for VMAT treatment plan optimizationBofei Sun, Jie Song, Guangying Zhu, Leyuan Shi. 455-460 [doi]
- Improved knot-tying methods for autonomous robot surgeryDer-Lin Chow, Wyatt Newman. 461-465 [doi]
- An algorithm for computing customized 3D printed implants with curvature constrained channels for enhancing intracavitary brachytherapy radiation deliveryAnimesh Garg, Sachin Patil, Timmy Siauw, J. Adam M. Cunha, I-Chow Hsu, Pieter Abbeel, Jean Pouliot, Ken Goldberg. 466-473 [doi]
- Evaluation of improvement probability for IMRT plansSiyang Gao, Xi Zhang, Leyuan Shi. 474-479 [doi]
- Product of tracking experts for visual tracking of surgical toolsSuren Kumar, Madusudanan Sathia Narayanan, Pankaj Singhal, Jason J. Corso, Venkat Krovi. 480-485 [doi]
- Approximate life cycle assessment using case-based reasoning for the eco design of productsMyeon-Gyu Jeong, James R. Morrison, Hyo-Won Suh. 486-491 [doi]
- Multi tier supplier selection for a sustainable global supply chainN. Viswanadham, A. Samvedi. 492-497 [doi]
- Optimization of CNC machine processing parameters for low carbon manufacturingQian Yi, Ying Tang, Congbo Li, Pengyu Li. 498-503 [doi]
- Incentive compatible green procurement using scoring rulesDeepak Bagchi, Shantanu Biswas, Y. Narahari, Nukala Viswanadham, P. Suresh, S. V. Subrahmanya. 504-509 [doi]
- Energy efficient and collision free motion of industrial robots using optimal controlStaffan Bjorkenstam, Daniel Gleeson, Robert Bohlin, Johan S. Carlson, Bengt Lennartson. 510-515 [doi]
- Information modeling to incorporate sustainability into production plansQais Y. AlKhazraji, Christopher Saldana, Tang Donghuan, Soundar Kumara. 516-521 [doi]
- Coordination of robot paths for cycle time minimizationDomenico Spensieri, Robert Bohlin, Johan S. Carlson. 522-527 [doi]
- A method for generating tool paths for milling pockets in prismatic parts using multiple toolsJoão C. E. Ferreira, Rafael A. Lopez. 528-533 [doi]
- Generative process planning with environmental constraintsUtpal Roy, Shahed Shojaeipour. 534-539 [doi]
- Performance improvement for high accuracy assembly process in manufacturing automationHeping Chen, Hongtai Cheng, Jian Liu, Biao Zhang, George Zhang, Thomas A. Fuhlbrigge. 540-545 [doi]
- Research on sensing strategy for exoskeleton robot controlTong Mu, Xiaodong Zhang. 546-549 [doi]
- UIO based robust fault diagnosis approach for aero-engine fiber-optic sensorChen He, Xiaodong Zhang, Binghui Jia. 550-553 [doi]
- A novel design approach for lower limb rehabilitation training robotJiangcheng Chen, Xiaodong Zhang, Rui Li. 554-557 [doi]
- Multichannel subgrade temperature acquisition system based on LabVIEW and serial communicationJun Zhang, Shengjie Jiao, Min Ye, Xiaodong Zhang, Jiangcheng Chen, Bin Pang, Jinping Li, Xinxin Xu. 558-563 [doi]
- A combinatorial auctions perspective on min-sum scheduling problemsYunpeng Pan. 564-569 [doi]
- Production and subcontracting policies for assemble-to-order systems with service level constraintsAshesh Kumar Sinha, Ananth Krishnamurthy. 570-575 [doi]
- A novel quadratic formulation for customer order scheduling problemLongfei Wang, Zhongshun Shi, Leyuan Shi. 576-580 [doi]
- DEPEND: Density adaptive power efficient neighbor discovery for wearable body sensorsBin Li, Wei Feng, Lin Zhang, Costas J. Spanos. 581-586 [doi]
- Integrated control of blind and lights in daily office environmentZhijin Cheng, Li Xia, Qianchuan Zhao, Yin Zhao, Fulin Wang, Fangting Song. 587-592 [doi]
- Causal analysis for non-stationary time series in sensor-rich smart buildingsYuxun Zhou, Zhaoyi Kang, Lin Zhang, Costas J. Spanos. 593-598 [doi]
- Transmission power allocation for cooperative relay-based neighborhood area networks for smart gridKai Ma, Guoqiang Hu, Costas J. Spanos. 599-604 [doi]
- Wireless wearable multi-sensory system for monitoring of sleep apnea and other cardiorespiratory disordersWoranat Wongdhamma, Trung Q. Le, Satish T. S. Bukkapatnam. 605-610 [doi]
- Modeling and analysis of mammography testing process at a breast imaging center of University of Wisconsin medical foundationXiang Zhong, Jingshan Li, Susan M. Ertl, Carol Hassemer, Lauren Fiedler. 611-616 [doi]
- A secure and scalable telemonitoring system using ultra-low-energy wireless sensor interface for long-term monitoring in life science applicationsW. Zhang, P. Passow, E. Jovanov, Regina Stoll, Kerstin Thurow. 617-622 [doi]
- Machine learning based prediction of warfarin optimal dosing for African American patientsAshkan Sharabiani, Houshang Darabi, Adam Bress, Larisa Cavallari, Edith Nutescu, Katarzyna Drozda. 623-628 [doi]
- A linearized model and nested-partitions heuristics for VMAT radiation treatment planning optimizationBofei Sun, Zhongshun Shi, Jie Song, Guangying Zhu, Leyuan Shi. 629-633 [doi]
- Energy efficiency management of an integrated serial production line and HVAC systemMichael Brundage, Qing Chang, Yang Li, Guoxian Xiao, Jorge Arinez. 634-639 [doi]
- Real time electricity demand response for sustainable manufacturing systems considering throughput bottleneck detectionZhichao Zhou, Lin Li. 640-644 [doi]
- Managing demand response for manufacturing enterprises via renewable energy integrationTongdan Jin, Jesus A. Jimenez, Zhigang Tian. 645-650 [doi]
- Machine control policies for energy saving in manufacturingNicla Frigerio, Andrea Matta. 651-656 [doi]
- A novel parabolic trough solar lighting and thermal system for building energy efficiencyTonghui Li, Fan Yang, Chris Yuan. 657-662 [doi]
- Data driven modeling of human welder intelligence: A neuro-fuzzy approachYuKang Liu, Weijie Zhang, YuMing Zhang. 663-668 [doi]
- Numerical simulation in compression molding of glass lensJian Zhou, Tianyi Shi, Yang Hu, Yueliang Ji, Mujun Li, Lianguan Shen. 669-674 [doi]
- Automated optical detection of particles and defects on a Li-Ion-cell surface using a single-point analysisGisela Lanza, Adrian Koelmel, Steven Peters, Anna Sauer, Stefan Stockey. 675-680 [doi]
- Automated workpiece localization for robotic weldingMabaran Rajaraman, Michael Dawson-Haggerty, Kenji Shimada, David A. Bourne. 681-686 [doi]
- Reconfiguring a modular robot into a humanoid formation: A multi-body dynamic perspective on motion scheduling for modules and their assembliesPaul M. Moubarak, Eric J. Alvarez, Pinhas Ben-Tzvi. 687-692 [doi]
- Robust position control of a pneumatic actuatorEddie Zisser, Amir Shapiro, Raziel Riemer. 693-698 [doi]
- Plug-and-play predictive control of modular nonlinear systems with coupling delaysTri Tran, Quang Phuc Ha. 699-704 [doi]
- Electrical sensorless adaptive control of permanent magnet synchronous machine drivesHicham Chaoui, Pierre Sicard. 705-710 [doi]
- Mathematical modeling and performance analysis of battery equalization systemsHaoqi Chen, Liang Zhang, Yehui Han. 711-716 [doi]
- A queuing network model for wafer fabrication using decomposition without aggregationDean Grosbard, Adar Kalir, Israel Tirkel, Gad Rabinowitz. 717-722 [doi]
- On the equilibrium probabilities of deterministic flow lines with random arrivalsWoo-Sung Kim, James R. Morrison. 723-729 [doi]
- Markov G/G/s model adaptation to factory operational curve though exponential correlationSylvain Bouhnik, Shalhevet Azran. 730-734 [doi]
- Modelling of a multi-zone building and assessment of its thermal behaviour using an energy simulation softwareSullivan Royer, Michael Bressan, Stéphane Thil, Thierry Talbert. 735-740 [doi]
- Emergency evacuation simulation in staircases considering evacuees' physical and psychological statusNing Ding, Peter B. Luh, Hui Zhang, Tao Chen. 741-746 [doi]
- A modified social force model considering relative velocity of pedestriansYuan Gao, Peter B. Luh, Hui Zhang, Tao Chen. 747-751 [doi]
- Sensor data quality assessment for building simulation model calibration based on automatic differentiationSisi Li, Zhen Song, MengChu Zhou, Yan Lu. 752-757 [doi]
- Model-driven complex workflow automation for laboratoriesSilke Holzmüller-Laue, Bernd Göde, Kerstin Thurow. 758-763 [doi]
- MDP-based appointment scheduling for one examination of two types of outpatientsLimin Zhu, Na Geng, Xiaolan Xie. 764-769 [doi]
- Analysis of production completion time in Bernoulli serial lines with finite buffersGuorong Chen, Liang Zhang, Jorge Arinez, Guoxian Xiao. 770-775 [doi]
- "Network-theoretic" queuing delay estimation in theme park attractionsAjay S. Aravamudhan, Archan Misra, Hoong Chuin Lau. 776-782 [doi]
- Integrated model of productivity and quality in serial production lines with repairs: Performance evaluation and bottleneck identificationFeng Ju, Jingshan Li, Guoxian Xiao, Jorge Arinez. 783-788 [doi]
- A queuing model for systems with rework and process downtimeAdam J. Brown, Fazleena Badurdeen. 789-794 [doi]
- Performance comparison of the virtual cell layout with cellular and job shop configurations using simulation and design of experimentsJoão C. E. Ferreira, Paulo A. Reaes. 795-800 [doi]
- New robust position and force regulation for a compliant microgripperQingsong Xu. 801-806 [doi]
- Fast image drift compensation in scanning electron microscope using image registrationNaresh Marturi, Sounkalo Dembele, Nadine Piat. 807-812 [doi]
- Fine registration of SEM and AFM images using Monte Carlo simulationsChristian Geldmann. 813-818 [doi]
- Electrophoresis-based motion planning and control of a nanowire in fluid suspensionKaiyan Yu, Xiang Lu, Jingang Yi, Jerry Shan. 819-824 [doi]
- Convergence analysis and parallel computing implementation for the multiagent coordination optimization algorithm with applicationsHaopeng Zhang, Qing Hui. 825-830 [doi]
- Cooperative and active sensing in mobile sensor networks for scalar field mappingHung Manh La, Weihua Sheng, Jiming Chen. 831-836 [doi]
- Integrated planning of constraint sensor management and patrollingHamidreza Nourzadeh, John E. McInroy. 837-843 [doi]
- Topologies of stable strategic networks with localized payoffsRohith Dwarakanath Vallam, C. A. Subramanian, Y. Narahari, Ramasuri Narayanam, Srinath Narasimha. 844-849 [doi]
- ReFrESH: A self-adaptive architecture for autonomous embedded systemsYanzhe Cui, Richard M. Voyles, Mohammad H. Mahoor. 850-855 [doi]
- Transient scheduling of single armed cluster tools: Algorithms for wafer residency constraintsHong-Yue Jin, James R. Morrison. 856-861 [doi]
- Petri net modeling and one-wafer scheduling of single-arm multi-cluster toolsQinghua Zhu, Naiqi Wu, Yan Qiao, MengChu Zhou. 862-867 [doi]
- Scheduling of time constrained dual-arm cluster tools with wafer revisitingYan Qiao, Naiqi Wu, MengChu Zhou. 868-873 [doi]
- Optimal scheduling of transient cycles for single-armed cluster toolsDae-Kyu Kim, Tae-Eog Lee, Hyun-jung Kim. 874-879 [doi]
- Optimization of probe vehicle deployment for traffic status estimationKang-Ching Chu, Kazuhiro Saitou. 880-885 [doi]
- Energy-optimal velocity profiles for electric city busesAntti Lajunen. 886-891 [doi]
- A real time traffic management model for regional railway networks under disturbancesMariagrazia Dotoli, Nicola Epicoco, Marco Falagario, Astrid Piconese, Fabio Sciancalepore, Biagio Turchiano. 892-897 [doi]
- Application of vector ordinal optimization to the transportation systems with agent based modellingZ. Shen, K. Wang, F. Y. Wang, K. Wang. 898-903 [doi]
- A signal split optimization approach based on model predictive control for large-scale urban traffic networksBao-Lin Ye, Weimin Wu, Xuanhao Zhou, Wei-Jie Mao, Jixiong Li. 904-909 [doi]
- A Discrete event model for multiple inhabitants location trackingMickaël Danancher, Jean-Jacques Lesage, Lothar Litz, Gregory Faraut. 910-915 [doi]
- Comparing detailed and abstract timed models of automated discrete manufacturing systemsMatthieu Perin, Jean-Marc Faure. 916-923 [doi]
- One computationally improved deadlock prevention policy for flexible manufacturing systems using Petri netsYen-Liang Pan, HeSuan Hu, MuDer Jeng. 924-929 [doi]
- Compositional nonblocking verification for extended finite-state automata using partial unfoldingSahar Mohajerani, Robi Malik, Martin Fabian. 930-935 [doi]
- Efficient design of Petri-net supervisors with disjunctive specificationsMarian V. Iordache, Po Wu, Feng Zhu, Panos J. Antsaklis. 936-941 [doi]
- A novel nonlinear compensator based on digital acceleration controlMasashi Okuma, Takanori Emaru, Yohei Hoshino, Yukinori Kobayashi. 942-947 [doi]
- Model-based compliant motion control scheme for assembly tasks using vision and force informationTakashi Nammoto, Kazuhiro Kosuge, Koichi Hashimoto. 948-953 [doi]
- Robotic surface assembly via contact state transitionsAmar Saric, Jing Xiao, Jane Shi. 954-959 [doi]
- Robotic arm kinematics and bilateral haptic feedback over an ethernet communications linkBart Milne, George Buchanan, Scott Paulin, Xiaoqi Chen, Christopher E. Hann, Andre Geldenhuis, Richard Parker. 960-965 [doi]
- Analysis and development of self-reconfigurable open kinematic machinery systemsRiyadh Al Saidi, B. Minaker. 966-971 [doi]
- Integrated operating room scheduling optimization under particularly workload constrain of surgeonBofei Sun, Jie Song, Leyuan Shi. 972-977 [doi]
- Modeling and analysis of hospital inpatient rescue process: A Markov chain approachXiaolei Xie, Jingshan Li, Colleen H. Swartz, Yue Dong. 978-983 [doi]
- Improving patient length-of-stay in emergency department through dynamic resource allocation policiesKar Way Tan, Wei Hao Tan, Hoong Chuin Lau. 984-989 [doi]
- A Markov chain approach to study flow disruptions on surgery in emergency careXiufeng Shao, Jingshan Li, Douglas A. Wiegmann. 990-995 [doi]
- Trajectory tracking and anti-sway control of three-dimensional offshore boom cranes using second-order sliding modesRaja Mohd Taufika Raja Ismail, Q. P. Ha. 996-1001 [doi]
- Robust position control of an autonomous underwater vehicle: A comparative studySpandan Roy, Sambhunath Nandy, Sankar Nath Shome, Ranjit Ray. 1002-1007 [doi]
- Optimization processing unit (OPU) applied to integrated circuit design and manufacturingDon C. L. Chen, J. T. Tzeng, David B. Scott, S. W. Peng, M. H. Shen, K. T. Sio, Praneeth Narayanasetti. 1008-1015 [doi]
- Assembly planning for planar structures of a brick wall pattern with rectangular modular robotsJungwon Seo, Mark Yim, Vijay Kumar. 1016-1021 [doi]
- A job-family-oriented algorithm for re-entrant batch processing machine schedulingWenyou Jia, Zhibin Jiang, You Li. 1022-1027 [doi]
- Off-line learning based adaptive dispatching rule for semiconductor wafer fabrication facilityL. Li, H. Xu. 1028-1033 [doi]
- Master production schedule and system for excelling enterprise resources (SEER) in the LED industryJia-Nian Zheng, Chen-Fu Chien. 1034-1039 [doi]
- Prior-knowledge assisted fast 3D map building of structured environments for steel bridge maintenanceStephan Sehestedt, Gavin Paul, David Rushton-Smith, Dikai Liu. 1040-1046 [doi]
- Automatic recognition of spurious surface in building exterior surveyYan Lu, Dezhen Song, Haifeng Li, Jingtai Liu. 1047-1052 [doi]
- Autonomous robotic system for high-efficiency non-destructive bridge deck inspection and evaluationHung Manh La, Ronny Salim Lim, Basily Basily, Nenad Gucunski, Jingang Yi, Ali Maher, Francisco A. Romero, Hooman Parvardeh. 1053-1058 [doi]
- Caterpillar-based cable climbing robot for inspection of suspension bridge hanger ropeKyeong Ho Cho, Young Hoon Jin, Ho Moon Kim, Hyungpil Moon, Jachoon Koo, Hyouk Ryeol Choi. 1059-1062 [doi]
- Modeling of pure percussive drilling for autonomous robotic bridge decks rehabilitationFei Liu, Mitja Trkov, Jingang Yi, Nenad Gucunski. 1063-1068 [doi]
- Optimal switched-type control design for a class of nonlinear systemsJavier Cabrera Martinez, Vadim Azhmyakov. 1069-1074 [doi]
- Synthesis and analysis of supervisory controllers for time-abstracted discrete-event systemsJasen Markovski. 1075-1082 [doi]
- Decentralized failure diagnosis of stochastic discrete event systemsJun Chen, Ratnesh Kumar. 1083-1088 [doi]
- Reduction of automated test generation for Simulink/Stateflow to reachability and its novel resolutionMeng Li, Ratnesh Kumar. 1089-1094 [doi]
- Robust deadlock control using shared-resources for production systems with unreliable workstationsHao Yue, HeSuan Hu. 1095-1100 [doi]
- Structured collaborative behavior of industrial robots in mixed human-robot environmentsHao Ding, Jakob Heyn, Bjoern Matthias, Harald Staab. 1101-1106 [doi]
- Applications and requirements of industrial robots in meat processingSang Choi, George Zhang, Thomas A. Fuhlbrigge, Thomas Watson, Richard Tallian. 1107-1112 [doi]
- An interdisciplinary SysML based modeling approach for analyzing change influences in production plants to support the engineeringKonstantin Kernschmidt, Birgit Vogel-Heuser. 1113-1118 [doi]
- Easy robot programming concepts: An industrial perspectiveGregory F. Rossano, Carlos Martinez, Mikael Hedelind, Steve Murphy, Thomas A. Fuhlbrigge. 1119-1126 [doi]
- Development of a position sensitive device and control method for automated robot calibrationErick Nieves-Rivera, Ning Xi, Yunyi Jia, Carlos Martinez, George Zhang. 1127-1132 [doi]
- A control policy for γ-nets without reachability analysis and siphon enumerationWenhui Wu, Daniel Yuh Chao, Fang Yu. 1133-1138 [doi]
- Supervisor synthesis and performance improvement for automated manufacturing systems by using Petri netsHeSuan Hu, MengChu Zhou, Yang Liu. 1139-1144 [doi]
- Maximally permissive distributed control of large scale automated manufacturing systems modeled with Petri netsHeSuan Hu, MengChu Zhou, Yang Liu. 1145-1150 [doi]
- A polynomial deadlock avoidance policy for a class of assembly processes based on Petri netsHao Yue, HeSuan Hu. 1151-1156 [doi]