Abstract is missing.
- Domain specific language for structural modeling of logically controlled discrete-event mechatronic systemsKrzysztof Pietrusewicz, Michael Scopchanov. 1-6 [doi]
- Dynamic positioning with Voith Schneider Propeller: Experimental system validation with a model-scale offshore supply vesselPhilipp Koschorrek, Charlotte Siebert, Lasse Theilen, Ole Detlefsen, Michael Palm, Klaus-Peter Mach, Marc Steinwand, Torsten Jeinsch, Moustafa Abdel-Maksoud. 7-12 [doi]
- Direct algorithm for optimizing robust MPC of drinking water distribution systems hydraulicsArkadiusz Ciminski, Kazimierz Duzinkiewicz. 13-18 [doi]
- Practical verification of active disturbance rejection controller for the pneumatic setupPawel Nowak, Jacek Czeczot. 19-24 [doi]
- Open-loop control system of liquid level in double tank cascade systemKrzysztof S. Kula. 25-30 [doi]
- Isopropanol concentration control in the ultrasonic nebulization processDariusz Choinski, Piotr Skupin, Piotr Krauze, Witold Ilewicz, Zdzislaw Bielecki. 31-36 [doi]
- Crazyflie 2.0 quadrotor as a platform for research and education in robotics and control engineeringWojciech Giernacki, Mateusz Skwierczynski, Wojciech Witwicki, Pawel Wronski, Piotr Kozierski. 37-42 [doi]
- Improving the quality of the classic servo drive by modifying the motion control algorithmBogdan Broel-Plater, Krzysztof Jaroszewski. 43-46 [doi]
- Cascade control algorithms of position and attitude for multirotor UAVPrzemyslaw Gasior, Adam Bondyra, Stanislaw Gardecki, Andrzej J. Kasinski. 47-52 [doi]
- Study of the efficiency of an algorithm that improves the accuracy of slow-motion control of a servo driveBogdan Broel-Plater, Krzysztof Jaroszewski. 53-57 [doi]
- Influence of free convection on heat transfer in control problems for a cylindrical bodyDmitri Knyazkov, Georgy V. Kostin, Vasiliy V. Saurin. 58-63 [doi]
- Reduction of wave linear repetitive processes to singular Roesser model formKrzysztof Galkowski, M. S. Boudellioua, Eric Rogers. 64-69 [doi]
- Extension of Cayley-Hamilton theorem and a procedure for computation of the Drazin inverse matricesTadeusz Kaczorek. 70-72 [doi]
- The analysis of permissible quality indices of the system with affine uncertainty of characteristic polynomial coefficientsSergey An. Gayvoronskiy, Tatiana Ezangina, Ivan Khozhaev. 73-77 [doi]
- Finding a set of (A, B, C, D) realizations for single-input multiple-output dynamic system: First approach using digraph-based method for solutions with intersection vertexKonrad Andrzej Markowski, Krzysztof Hryniow. 78-83 [doi]
- Triangulation positioning system based on a static IR beacon-receiver systemMaciej Ciezkowski. 84-88 [doi]
- Data fusion of GPS sensors using Particle Kalman Filter for ship dynamic positioning systemKrzysztof Jaros, Anna Witkowska, Roman Smierzchalski. 89-94 [doi]
- Evaluating the ellipsoidal collision avoidance region for the future DAA systemsMateusz Spychala, Rafal Osypiuk. 95-100 [doi]
- Design of ship course-keeping system via robust adaptive approachZenon Zwierzewicz. 101-106 [doi]
- Adaptive optimal control algorithm for vibrational systems under nonlinear frictionMaciej Wasilewski, Dominik Pisarski. 107-112 [doi]
- Adaptive and robust motion control in presence of LuGre-type frictionMarcin Jastrzebski, Jacek Kabzinski, Przemyslaw Mosiolek. 113-118 [doi]
- Direct fuzzy adaptive control and nonparametric identification of robot manipulator with elastic jointsJurek Z. Sasiadek, Steve Ulrich, Adam Krzyzak. 119-124 [doi]
- Mobile agents and their use in a group of cooperating autonomous robotsZbynek Obdrzalek. 125-130 [doi]
- Implementation and evaluation of a bilateral teleoperation with use of wave variables in the ReMeDi system for remote medical examinationAdam Kurnicki, Mateusz Cholewinski, Bartlomiej Stanczyk, Krzysztof Arent. 131-136 [doi]
- Rapid navigation function control for omnidirectional mobile platformWojciech Kowalczyk, Mateusz Przybyla, Krzysztof Kozlowski. 137-140 [doi]
- Nonlinear inverse modeling with signal prediction in bilateral teleoperation with force-feedbackMateusz Sakow, Arkadiusz Parus, Miroslaw Pajor, Karol Miadlicki. 141-146 [doi]
- Existence and continuous dependence of solutions on controls for linear control systems with different fractional ordersRafal Kamocki. 147-152 [doi]
- Novelty fractional-order backward difference and its applications in a control system analysisPiotr Ostalczyk. 153-158 [doi]
- A comparative analysis of two methods for model predictive control of fractional-order systemsRafal Stanislawski, Marek Rydel, Krzysztof J. Latawiec, Marian Lukaniszyn, Marcin Galek. 159-163 [doi]
- Damping of resonance peaks using adaptive notch filters in gearless servo drivesMario Aldag, Joachim Horn. 164-169 [doi]
- Estimation problems of pneumatic transport system for electromagnetic grindingZbigniew Ogonowski, Szymon Ogonowski. 170-173 [doi]
- Development of microprocessor, time optimized stepper motor driving algorithmLukasz Przenioslo, Marcin Holub. 174-179 [doi]
- Tracking control for a long pneumatic transmission lineRichard Kern, Nicole Gehring. 180-185 [doi]
- Optimal multivariable flux control of heat transfer in a metal barGeorgy V. Kostin, Andreas Rauh, Harald Aschemann, Vasily V. Saurin. 186-191 [doi]
- Boundary control of heat transfer processes in a cylindrical bodyAlexander Gavrikov, Georgy V. Kostin. 192-196 [doi]
- Object identification by tactile sensors with improved sensor resolutionChristian Thormann, Alexander Winkler. 197-201 [doi]
- Mobile robot with non-slip castor wheelRyszard Beniak, Tomasz Pyka. 202-205 [doi]
- A simulation evaluation of gCBHD formula for driftless nonholonomic systemsIgnacy Duleba, Arkadiusz Mielczarek. 206-211 [doi]
- Criterions of ν-similarity for the two-dimensional birth-death processesMarzena Filipowicz-Chomko, Ewa Girejko, Anna Poskrobko. 212-217 [doi]
- Research on possibilities of transporter movement using brain-computer interface based on Steady-State Visually Evoked Potential (SSVEP)Arkadiusz Kubacki, Arkadiusz Jakubowski, Dominik Rybarczyk. 218-221 [doi]
- Running pace estimation using complementary filter based fusion of GPS and pedometer dataKrzysztof Skrzypczyk. 222-225 [doi]
- Adaptive correction of the quantisation error in the frequency-to-code converterPiotr Warda. 226-231 [doi]
- Quaternion-based determination of 3D objects orientationWitold Zorski. 232-237 [doi]
- Two level algorithm with Tabu Search optimization for task scheduling problem in computing cluster environmentWojciech Bozejko, Piotr Nadybski, Mieczyslaw Wodecki. 238-242 [doi]
- Experimental results of stable time-varying multi-notch filterSlawomir Kocon, Piotr Okoniewski, Jacek Piskorowski. 243-247 [doi]
- Design of stable LTV multi-notch IIR filter with Lookup TablesPiotr Okoniewski, Slawomir Kocon, Jacek Piskorowski. 248-252 [doi]
- Bayesian estimator of a faulty state: Logarithmic odds approachPiotr Bania, Jerzy Baranowski. 253-257 [doi]
- Particle swarm based airfoil optimization for sUAV's operating in a low range of Reynold's numberTom Kusznir, Jaroslaw Smoczek. 258-262 [doi]
- Application of System on Chip (SoC) devices for the design of a smoke detector working with megapixel image streamsWieslaw Pamula, Maciej Sajkowski, Tomasz Stenzel, Jaroslaw Michalak, Grzegorz Baron, Bartlomiej Szady. 263-268 [doi]
- Learning process for nonstationary filtering network using genetic algorithmsAdrian Sztandera, Katarzyna Wiechetek. 269-273 [doi]
- New interesting facts about minimum-energy perfect control for LTI nonsquare state-space systemsWojciech P. Hunek. 274-278 [doi]
- A method for the order reduction of linear switching systemsFranco Blanchini, Daniele Casagrande, Wieslaw Krajewski, Umberto Viaro. 279-284 [doi]
- Controllability of delayed systemsKlamka Jerzy. 285-289 [doi]
- String stability of a leader following formation control with dynamic weightsAndrés A. Peters. 290-294 [doi]
- Decentralized fixed mode radius of LTI system with multiple input and output delaysPradosh Ranjan Sahoo, Sandip Ghosh, Pawel Dworak. 295-300 [doi]
- Dynamical aspects of multi-input single-output control for heat distribution processes: Case studyMichal Fratczak, Pawel Nowak, Piotr Laszczyk. 301-306 [doi]
- Oscillation attenuation for crane payloads by controlling the rope length using extended linearization techniquesAndreas Rauh, Robert Prabel, Harald Aschemann. 307-312 [doi]
- Experimental validation of a sensitivity-basec learning-type controller for a linear time-varying model of a flexible high-speed rack feederAndreas Rauh, Noel Cont, Harald Aschemann. 313-318 [doi]
- A discrete-time norm-optimal approach to iterative learning control of a bridge craneHarald Aschemann, Alexander Wache, Ole Kraegenbring. 319-324 [doi]
- Friction hysteresis compensation using phase correction of periodic trajectoriesBenedikt Haus, Paolo Mercorelli, Nils Werner. 325-330 [doi]
- An addendum to continuous-time dynamic system identification with multisine random excitations - From frequency response to transfer functionJaroslaw Figwer. 331-336 [doi]
- Robust identification of quadrocopter model for control purposesKrzysztof Arminski, Tomasz Zubowicz. 337-342 [doi]
- Multistage identification of an N-L-N Hammerstein-Wiener systemGrzegorz Mzyk, Marcin Bieganski, Bartlomiej Kozdras. 343-346 [doi]
- Accelerating the rate of convergence for LMS-like on-line identification and adaptation algorithms. Part 1: Basic ideasJaroslaw Figwer, Malgorzata I. Michalczyk, Teresa Glówka. 347-350 [doi]
- Smart beam system: Identification and minimal realization using digraphs theoryKonrad Andrzej Markowski, Cristina I. Muresan. 351-355 [doi]
- An approach to automated tacit-knowledge acquisition and transformation in manufacturing companiesJustyna Patalas-Maliszewska, Irene Krebs, Adam Dudek. 356-360 [doi]
- Position estimation at zero speed for PMSM using the principal component analysisKonrad Urbanski, Krzysztof Nowopolski. 361-366 [doi]
- Dynamical behavior of the hybrid exothermic chemical reactor with imperfect mixingPiotr Skupin, Mieczyslaw Metzger, Piotr Laszczyk, Malgorzata Niedzwiedz. 367-372 [doi]
- Parametrization of robotic deburring process with motor skills from motion primitives of human skill modelPayam Parvizi, Musab Cagri Ugurlu, Kemal Acikgoz, Erhan Ilhan Konukseven. 373-378 [doi]
- Model of ADRC speed control system for complex mechanical object with backlashBartlomiej Wicher, Krzysztof Nowopolski. 379-383 [doi]
- Emergency control of a space 3R manipulator in case of one joint failureWojciech Domski, Alicja Mazur. 384-389 [doi]
- Application of Hamiltonian mechanics to control design for industrial robotic manipulatorsVaclav Zada, Kvetoslav Belda. 390-395 [doi]
- Granular jamming manipulator filled with new organic materialsS. Mohammad Z. Sayyadan, Faezeh Gharib, Alireza Garakan. 396-401 [doi]
- Regularization of the differential inverse orientation problem of generic serial revolute joint manipulatorsDániel Andras Drexler. 402-407 [doi]
- Backstepping-based sliding mode control of an electro-pneumatic clutch actuatorRobert Prabel, Harald Aschemann. 408-413 [doi]
- Reaching law based discrete time switching quasi-sliding mode controllerPawel Latosinski. 414-418 [doi]
- Simulation of hybrid systems with sliding modesDamian Suski, Radoslaw Pytlak. 419-424 [doi]
- Inventory management strategies with higher relative degree sliding variablesPawel Latosiiiski, Andrzej Bartoszewicz. 425-430 [doi]
- Accelerating PSO based feedrate optimization for NURBS toolpaths using parallel computation with OpenMPRafal Szczepanski, Krystian Erwinski, Marcin Paprocki. 431-436 [doi]
- A nonparametric estimation method for stochastic differential equation with sub-fractional Brownian motionDorota Bochnacka, Darya V. Filatova. 437-442 [doi]
- Concept of iterative optimization of minimally invasive surgeryAlexander Benkmann, Eike Smolinski, Torsten Jeinsch, Peter Westerhoff, Thomas Wustrack, Hagen Hommel. 443-446 [doi]
- Extremal problems for distributed parabolic systems with boundary conditions involving time-varying lagsAdam Kowalewski. 447-452 [doi]
- Energy-aware scheduling of jobs performed sequentiallyRafal Rózycki, Grzegorz Waligóra. 453-457 [doi]
- Big valley in scheduling problems landscape - Metaheuristics with reduced searching areaWojciech Bozejko, Czeslaw Smutnicki, Mariusz Uchronski, Mieczyslaw Wodecki. 458-462 [doi]
- Minimizing cycle time in manufacturing systems with additional technological constraintsCzeslaw Smutnicki. 463-470 [doi]
- Metaheuristics for some discrete-continuous project scheduling problems to maximize the net present valueGrzegorz Waligóra. 471-476 [doi]
- The cauchy problem for linear nonstationary fractional systemsZbigniew Zaczkiewicz. 477-481 [doi]
- Decentralized stabilization of descriptor fractional positive continuous-time linear systems with delaysLukasz Sajewski. 482-487 [doi]
- Multiple model adaptive control applied to fractional order systemsJakub Bernat. 488-493 [doi]
- Modelling of a batch-fired straw boiler for control of the combustion chamber temperatureWojciech Kreft. 494-497 [doi]
- On the application of Laplace transform to fractional differential-algebraic systems with delaysZbigniew Zaczkiewicz. 498-502 [doi]
- Optimal stopping areas for discrete time linear quadratic control problemEdward Kozlowski. 503-507 [doi]
- Decomposition and application of Jordan form to controllability test of positive fractional discrete-time systems with delay in state vectorRafal Kociszewski. 508-513 [doi]
- Exponential stability of systems under periodic sampling of the second orderJustyna Janczak, Ewa Pawluszewicz. 514-518 [doi]
- Sliding mode control based on the reaching law approach - A brief surveyPawel Latosinski. 519-524 [doi]
- Comparison of FOC and DTC methods for a Matrix Converter-fed permanent magnet synchronous motorDariusz Majchrzak, Przemyslaw Siwek. 525-530 [doi]
- Application of higher relative degree sliding variables for congestion control in communication networksMarek Jaskula, Mateusz Pietrala, Piotr Lesniewski, Andrzej Bartoszewicz. 531-536 [doi]
- Model matching level control for a coupled tanks system using time-scale separation techniqueValery D. Yurkevich, Marian J. Blachuta, Rafal T. Grygiel, Robert Bieda. 537-542 [doi]
- Robust stability conditions of fractional order discrete-time linear systemsAndrzej Ruszewski. 543-547 [doi]
- Relating phase-field and perimeter based structural optimization of variational inequalitiesAndrzej Myslinski, Konrad Koniarski. 548-553 [doi]
- Inverse-based methods to minimum-energy MV control for nonsquare state-space systemsWojciech P. Hunek, Jacek K. Korniak. 554-557 [doi]
- Extended LMI characterization of some control problems for linear repetitive processesWojciech Paszke, Marcin Boski, Eric Rogers. 558-563 [doi]
- Stability of positive nonlinear systemsTadeusz Kaczorek, Kamil Borawski. 564-569 [doi]
- Theoretical and experimental background for artificial neural network modeling of alpha type Stirling engineAdrian Chmielewski, Jakub Mozaryn, Maciej Krzeminski. 570-575 [doi]
- Recursive neural network as speed controller for two-sided electrical drive with complex mechanical structureKrzysztof Nowopolski, Bartlomiej Wicher, Dominik Luczak, Przemyslaw Siwek. 576-581 [doi]
- Fuzzy arithmetical controller design for active road vehicle suspension in the presence of uncertaintiesAndreas Hofmann, Michael Hanss. 582-587 [doi]
- An iterative solution approach to eigenvalue problems for linear hamiltonian systems and its application to a hybrid system control problemAlexander Gavrikov. 588-593 [doi]
- Online parameter identification for continuous fluidized bed spray granulation with external sieve-mill cycleStefan Palis, Achim Kienle. 594-598 [doi]
- Control-based damping of elastic gantry crane vibrationsIevgen Golovin, Stefan Palis. 599-604 [doi]
- Comparison of different filter approaches for the online frequency analysis of speech signalsAndreas Rauh, Susann Tiede, Cornelia Klenke. 605-610 [doi]
- Polish whispery speech recognition - Minimum sampling frequencyPiotr Kozierski, Talar Sadalla, Szymon Drgas, Adam Dabrowski, Wojciech Giemacki. 611-615 [doi]
- The impact of vocabulary size and language model order on the polish whispery speech recognitionPiotr Kozierski, Talar Sadalla, Szymon Drgas, Adam Dabrowski, Joanna Zietkiewicz. 616-621 [doi]
- Control of complex robotic systems: Challenges, design and experimentsAhmed Chemori. 622-631 [doi]
- Electrochemical impedance spectroscopy applied for assessment of electrodes used in EEG examinationPrzemyslaw Makiewicz, Joanna Górecka. 632-635 [doi]
- An expert system for pre-diagnostics screening using neurofeedback signalsMagda Zolubak, Mariusz Pelc, Aleksandra Kawala-Janik, Rafal Stanislawski. 636-641 [doi]
- Trial measurement of movement-related cortical dynamics using electroencephalography and diffuse correlation spectroscopyChase Haddix, Ahmed A. Bahrani, Aleksandra Kawala-Janik, Walter G. Besio, Guoqiang Yu, Sridhar Sunderam. 642-645 [doi]
- Tracking performance of angular velocity in a servo system with fractional-order PI controller and anti-windup compensationTalar Sadalla, Dariusz Horla, Wojciech Giernacki, Piotr Kozierski. 646-651 [doi]
- Analogue electronic active filter implementation of an approximate state space realisation of a fractional-order systemAndrzej Tutaj, Jerzy Baranowski. 652-657 [doi]
- Robust fractional order controller for a linear active magnetic bearing systemTomasz Nartowicz, Ewa Pawluszewicz, Arkadiusz Mystkowski. 658-663 [doi]
- Stiffness variations in granular jamming robots; an experimental methodS. Mohammad Z. Sayyadan, M. Mehdi Moniri, Faezeh Gharib. 664-669 [doi]
- Localization and efficient grasping of objects by a manipulator using RFID techniqueChristian Thormann, Alexander Winkler. 670-675 [doi]
- Exploiting the natural dynamics of compliant joint robots for cyclic motionsNavvab Kashiri, Emmanouil Spyrakos-Papastavridis, Darwin G. Caldwell, Nikos G. Tsagarakis. 676-681 [doi]
- The distributed model predictive controller for the nuclear power plant turbo-generator setPawel Sokolski, Tomasz A. Rutkowski, Kazimierz Duzinkiewicz. 682-687 [doi]
- Predictive control for offset-free motion of industrial articulated robotsKvetoslav Belda, Vaclav Zada. 688-693 [doi]
- Online tuned model predictive control for robotic systems with bounded noiseKvetoslav Belda, Lenka Pavelkova. 694-699 [doi]
- The diagnostic gastroenterology needs in relation to exisiting tools, research and design work on a new tool in endoscopy fieldLukasz Fracczak, Agnieszka Kobierska, Katarzyna Koter, Pawel Zak, Elzbieta Czkwianiac, Michal Kolejwa, Andrzej Nowak, Anna Socha-Banasiak, Joanna Slezak. 705-710 [doi]
- Static and dynamic properties investigation of new generation of transversal artificial muscleKoter Katarzyna, Fracczak Lukasz, Wojtczak Anna, Bryl-Nagorska Barbara, Mizejewski Adrian, Sawicki Adam. 711-716 [doi]
- Ground plane estimation from sparse LIDAR data for loader crane sensor fusion systemKarol Miadlicki, Miroslaw Pajor, Mateusz Sakow. 717-722 [doi]
- Adaptive head movements tracking algorithms for AR interface controlled telepresence robotAleksei I. Shchekoldin, Alexander D. Shevyakov, Nikolay U. Dema, Sergey A. Kolyubin. 728-733 [doi]
- Autonomous drone control system for object tracking: Flexible system design with implementation examplePawel Smyczynski, Lukasz Starzec, Grzegorz Granosik. 734-738 [doi]
- Software-based method of increasing the effective resolution of a measurement chain for a transducer with a pulse frequency outputEligiusz Pawlowski. 745-750 [doi]
- Analysis of a mechanical resonance in the flapping wing actuationDiana Olejnik, Adam Wojciech Lukomski. 751-755 [doi]
- Constrained generalized predictive control with particle swarm optimizer for an overhead craneJaroslaw Smoczek, Janusz Szpytko. 756-761 [doi]
- Behaviour of the fractional Cucker-Smale type model for a couple of agentsEwa Girejko, Dorota Mozyrska, Malgorzata Wyrwas. 762-767 [doi]
- On-line spectrophotometric measurements of isopropanol concentration in process of nebulizationDariusz Choinski, Witold Ilewicz, Piotr Krauze, Piotr Skupin, Zdzislaw Bielecki. 768-773 [doi]
- Semi-symbolic operational computation for robust control system designLeandro Gil, Martin Radetzki. 779-784 [doi]
- Robust backstepping stabilization of nonlinear systems with time-varying parametersJacek Kabzinski, Przemyslaw Mosiolek. 785-790 [doi]
- Interval methods for the implementation and verification of robust gain scheduling controllersJulia Kersten, Andreas Rauh, Harald Aschemann. 791-796 [doi]
- The active vibration control of the plate structure by using LQG controller and piezo-stripesAndrzej Koszewnik. 797-802 [doi]
- High performance PID control of a cascade tanks system as an example for control teachingRobert Bieda, Marian J. Blachuta, Rafal T. Grygiel. 803-808 [doi]
- Velocity estimation for slow motion devices equipped with encoderKrzysztof Kolek, Maciej Rosól. 809-814 [doi]
- Application of a modified error governor to electronic throttle controlAlexander Scholey, Wolfgang Drewelow, Torsten Jeinsch, Nick Weinhold. 815-819 [doi]
- Improvement of accuracy of the membrane shape mapping of the artificial ventricle by eliminating optical distortionWojciech Sulej, Krzysztof Murawski, Tadeusz Pustelny. 820-825 [doi]
- Exponentially weighted aggregation of models for Wiener-Hammerstein system modellingPawel Wachel, Zygmunt Hasiewicz. 826-830 [doi]
- Implementation of hierarchical control of drinking water supply system: Didactic project - Computer controled systemJaroslaw Tamawski, Tomasz A. Rutkowski, Arkadiusz Ciminski. 831-836 [doi]
- Application of the waveform relaxation technique to the co-simulation of power converter controller and electrical circuit modelsM. Maciejewski, Idoia Cortes Garcia, Sebastian Schöps, Bernhard Auchmann, Lorenzo Bortot, Marco Prioli, Arjan Verweij. 837-842 [doi]
- Modelling dynamics of strongly coupled air paths in pneumatic transport system for milling productOliwia Krauze, Marek Pawelczyk. 843-848 [doi]
- Preliminary studies on modelling the drying process in product classification and separation path in an electromagnetic mill installationJan Wegehaupt, Dariusz Buchczik, Oliwia Krauze. 849-854 [doi]
- On the efficiency of a fast technique of impulsive noise removal in color digital imagesLukasz Malinski, Bogdan Smolka, Danuta Jama. 855-860 [doi]
- Novel method for joining missing line fragments for medical image analysisPatryk Najgebauer, Leszek Rutkowski, Rafal Scherer. 861-866 [doi]
- A 2D, stochastic model of a phase-detection autofocusAdrian Galeziowski. 867-871 [doi]
- Estimation of DC motor parameters using a simple CMOS cameraZdzislaw Kowalczuk, Tomasz Merta. 872-877 [doi]
- A smooth local polynomial model of vignettingAndrzej Kordecki, Artur Bal, Henryk Palus. 878-882 [doi]
- Towards safe human-robot collaborationBernd Finkemeyer. 883-888 [doi]
- Multi-frequency conditioning system of the inductive loop sensor - Simulation investigationsZbigniew Marszalek, Ryszard Sroka, Tadeusz Zeglen. 889-893 [doi]
- Mechatronic sound intensity 2D probeWitold Mickiewicz, Michal Raczynski. 894-897 [doi]
- Estimation of micro-Doppler signals using Viterbi track-before-detect algorithmPrzemyslaw Mazurek. 898-902 [doi]
- Using a nonlinear mechanical control coupling metric for biped robot control and designTan Chen, Xiangyu Ni, James P. Schmiedeler, Bill Goodwine. 903-908 [doi]
- General Lagrangian Jacobian motion planning algorithm for affine robotic systems with application to a space manipulatorKrzysztof Tchon, Joanna Ratajczak. 909-914 [doi]
- Singularity avoidance in a robotized ultrasound scanAïcha Fonte, Pierre Vieyres, Gérard Poisson, Cyril Novales. 915-920 [doi]
- Characteristic equations for descriptor linear electrical circuitsKamil Borawski. 921-926 [doi]
- Non-invasive control of the Hegselmann-Krause type modelEwa Girejko, Agnieszka B. Malinowska. 927-932 [doi]
- Combined estimation of actuator and sensor faults for non-linear dynamic systemsMarcin Pazera, Marcin Witczak, Józef Korbicz. 933-938 [doi]
- Simultaneous estimation of multiple actuator anc sensor faults for Takagi-Sugeno fuzzy systemsMarcin Pazera, Marcin Witczak, Mariusz Buciakowski, Marcin Mrugalski. 939-944 [doi]
- Reduction strategies for the Cardinality Constrained Knapsack problemKrzysztof Pienkosz. 945-948 [doi]
- Speed as an element of optimal vessel traffic schedulingWaldemar Uchacz. 949-954 [doi]
- Analysis of 3D model of reluctance stepper motor with a novel constructionJakub Kolota, Slawomir Stepien. 955-958 [doi]
- Parametric identification of mathematical model of inverter drive hydraulic pump with induction motorTadeusz Stefanski, Lukasz Zawarczynski. 959-964 [doi]
- Modelling of a contact pressure distribution caused by assembly errors in a spur gear transmissionPiotr Jablonski, Rafal Talar, Katarzyna Peta, Karol Grochalski, Marcin Suszynski. 965-970 [doi]
- Replacement strategies of genetic algorithm in parametric identification of induction motorKatarzyna Rutczynska-Wdowiak. 971-975 [doi]
- Hybrid batch reactor modeling and experimental evaluation of heat transfer processMalgorzata Niedzwiedz, Piotr Laszczyk, Piotr Skupin, Mieczyslaw Metzger. 976-981 [doi]
- On some properties of ν-similar one-dimensional birth-death processesMarzena Filipowicz-Chomko, Ewa Girejko, Anna Poskrobko. 982-987 [doi]
- Rotational speed control of multirotor UAV's propulsion unit based on fractional-order PI controllerWojciech Giernacki, Talar Sadalla, Jaroslaw Goslinski, Piotr Kozierski, Joao P. Coelho, Sasa Sladic. 993-998 [doi]
- Toward cache based decision making embedded control systemsDominika Swierczynska, Tomasz Stach, Mariusz Pelc. 999-1004 [doi]
- Real-time monitoring system for potentially dangerous activities detectionAleksandra Postawka. 1005-1008 [doi]
- Model of an electric vehicle powered by a PV cell - A case studyAdrian Chmielewski, Przemyslaw Szulim, Mariusz Gregorczyk, Robert Guminski, Tomasz Mydlowski, Jedrzej Maczak. 1009-1014 [doi]
- Model of a stirling engine with a rhombic drive: Case studyAdrian Chmielewski, Robert Guminski, Jedrzej Maczak, Tomasz Mydlowski. 1015-1020 [doi]
- Case study of Switched Reluctance Motor for use in the Electric Torque ToolJerzy Baranowski, Tomasz Drabek, Tomasz Lerch, Pawel Piatek. 1021-1026 [doi]
- Base-stock distributed inventory management in continuous-review logistic systems - Control system perspectivePrzemyslaw Ignaciuk. 1027-1032 [doi]
- Determining orientation of the aerodynamically adhesive wall climbing robotVladislav Chashchukhin, Dmitri Knyazkov, Maxim M. Knyazkov, Armen Nunuparov. 1033-1038 [doi]
- Indirect measurements of milling product quality in the classification system of electromagnetic millDariusz Buchczik, Jan Wegehaupt, Oliwia Krauze. 1039-1044 [doi]
- Multivariate generalized Gaussian function mixture for volume modeling of parathyroid glandsMaria H. Listewnik, Hanna Piwowarska-Bilska, Krzysztof Safranow, Jacek Iwanowski, Maria Laszczynska, Maria Chosia, Marek Ostrowski, Bozena Birkenfeld, Przemyslaw Mazurek. 1045-1050 [doi]
- Takagi-Sugeno fuzzy model of dissolved oxygen concentration dynamics in a bioreactor at WWTPTomasz Zubowicz, Kazimierz Duzinkiewicz, Robert Piotrowski. 1051-1056 [doi]
- Desiginig of active vibration control system for smart structure 2-D with non-collocated piezo-elementsAndrzej Koszewnik. 1057-1062 [doi]
- Reconfiguration of fixed-wing UAV control system in autonomous flightMarcin Zugaj. 1063-1068 [doi]
- Deep neural networks approach to skin lesions classification - A comparative analysisArkadiusz Kwasigroch, Agnieszka Mikolajczyk, Michal Grochowski. 1069-1074 [doi]