Table of Contents

• RMS and power measurements based on Wavelet packet decomposition using special IIR filter bankYing Hai, Jing-yu Chen. 1-4 [doi]
• GrC and ANN based fault diagnosis method of distribution networkXiaoming Han, Yan Chen. 5-8 [doi]
• Linux-based remote monitoring and control of CNC machine tool of SQLiteChun-mao Liu, Yun-gang Zhang, Hong-ying Wang. 9-12 [doi]
• Auto disturbance rejection control for beam magnetic suspension system of gantry-moving type numerical control machine toolChunfang Liu, Xiumeng Ren, Limei Wang. 13-16 [doi]
• Monte Carlo EM algorithm for two-component mixture of generalized linear random effects models with varying coefficientsXingcai Zhou, Changchun Tan. 17-20 [doi]
• H∞ control for magnetic suspension system of gantry-moving type numerically controlled machine tool crossbeamChunfang Liu, Dianbo Fu, Tong Wang. 21-23 [doi]
• Study of hydraulic fault diagnosis based on power switchgearsJuqing Yang, Jiaoyue Liu, Hongying Wang. 24-26 [doi]
• A hybrid artificial fish swarm algorithm for Bin-packing problemLei Wang, Leijuan Ma. 27-29 [doi]
• Research about the extraction of signal feature of film instability rotorHongpu Liu, Hongying Wang. 30-32 [doi]
• The development of virtual experimental platform of industrial control based on configurationLeijuan Ma, Bing Zheng. 33-35 [doi]
• A study on the stress distribution of pressure vessel and saddle supportHaidong Ren, Erbao Peng. 36-39 [doi]
• Sketch-based garment modeling with constrained harnessWenpeng Xu, Fen Luo, Xiaohuan Qiang. 40-43 [doi]
• Study for mechanical transmission proposal of peristaltic pipe robotFeng Yang, Hongying Wang. 44-47 [doi]
• Multi-path with probable performance for congestion control in DHT networksZhi Chen, Guowei Huang. 48-51 [doi]
• A network traffic awareness architecture for universal redundancy eliminationChengrong Wu, Jue Wang, Jianping Zeng. 52-55 [doi]
• Design and implementation of information management system based on M-Station techniqueHui Yu, Li-Fang Wang, Yun-Lei Zhu, Zhong-qiu Zhang. 56-58 [doi]
• Design and implementation of PDA-based mobile inquiring system for oil well logging informationDejun Liu, Dali Gong, Zhonghua Ma, Yue Liu. 59-62 [doi]
• Design and implementation of intelligent ozonizer based on Atmega8Ling Xu, Gang Liu, Chao-wei Duan. 63-66 [doi]
• The analysis of CASE tools to the efficiency of software developmenYongzhuang Li, Chunfeng Ye. 67-69 [doi]
• Image segmentation algorithm based on improved GA and OTSUZhaoxia Tang, Ting Chen. 70-72 [doi]
• Research on conceptual design of heavy-duty truck frame based on topology optimizationBaozhong Qu, Lingjin Qu. 73-76 [doi]
• The finite element analysis of the coach body frontal crash and structure improvementRong-zheng Xu, Wei Zhou. 77-82 [doi]
• Analysis & rearch on the design of automation system for finite element process based on HyperWorksGuo-tong Zhang, Yang Liu. 83-86 [doi]
• Research on the three-dimensional modeling of roadway for coalmine based on GISXiaohuan Qiang, Jianchun Fu. 87-90 [doi]
• Dynamic simulaion of multibody system with planar clearance jointShoufeng Jin, Yuewen Su. 91-94 [doi]
• A rotor fault intelligence diagnosis system based on virtual instrumentGuoqing An, Donghui Liu, Weilu Zhu, Kejun Sun. 95-97 [doi]
• The research of software development supporting environment based on UMLZhuoyan Chen. 98-101 [doi]
• Design of digital correlator in the FPIR systemJian Lan, Jingye Yan, Ji Wu, Hao Liu. 102-105 [doi]
• Selection of parameter for SYN flood source-end detectionBo Yang, Xueyuan Wang. 106-109 [doi]
• Optimum design of planet gear mechanism based on VBQiaojun Li, Qianru Gong, Heng Du. 110-112 [doi]
• Research on configurable strategy of spacecraft data management systemZhongwen Li, Wentao Yao, Xianjun Li, Gang Ye. 113-116 [doi]
• Fuzzy control and simulation of the constant pressure water supply system for small-type water worksSuling Li, Lina Liu, Dawei Chen. 117-120 [doi]
• The design and implementation of leaf-spring robot control systemSuling Li, Junying Liu, Qianqian Jiang. 121-124 [doi]
• Non-contact human-computer interaction system based on gesture recognitionXiaoqiong Wang, Zhuyan Li, Jiangfeng Bai. 125-128 [doi]
• Virtual design of bike based on SolidWorksLifang Zhao, Shuguo Zhao. 129-132 [doi]
• Analysis of pendulum-structure influencing on guidance systm for high-speed Maglev train running on curveChunxia Zhao, Longhua She, Wensen Chang. 133-137 [doi]
• Scene simulation of navigation simulator based on Creator and VegaMing Li, Ming Liu, Lin Gong, Dingjun Hu. 138-140 [doi]
• Study on an active voltage equalization charge system of a series battery packPeiying Li, Yutian Pan, Yanqiang Ma, Qingzhang Qin. 141-144 [doi]
• Integration benefit allocation solution for reverse supply chainJing Li, Jing Yang 0001. 145-148 [doi]
• Application of an artificial neural network on railway passenger flow predictionDan Zheng, Yao Wang. 149-152 [doi]
• Application research of data mining on reservoir characterizationLichang Wang, Guo Tao, Zhizhang Wang. 153-156 [doi]
• Collision detection for 6-DOF parallel-link CMMWei Zhou, Dali Gong, Yaru Xue, Caiping Liu. 157-160 [doi]
• Research on functional testing system of mechanical section in oil logging devicesQize Peng. 161-164 [doi]
• Effective load balancing for cloud-based multimedia systemWen Hui, Chuang Lin, Hai-ying Zhao, Yang Yang. 165-168 [doi]
• Fuzzy PID control study and simulation of gas collector pressure of coke ovensJiangping Huang, Kaihua Chen, Qianjin Yu. 169-172 [doi]
• Design and realization of EtherCAT masterTong Zhou, Jingtao Hu. 173-177 [doi]
• Application of gesture recognition based on simulated annealing BP neural networkHui Zhang, Yongqi Wang, Chen Deng. 178-181 [doi]
• Research on energy consumption analysis of beer brewing processJing Bai, Tiecheng Pu, Jisheng Xing, Guocheng Niu, Shuran Zhang, Qiang Liu. 182-185 [doi]
• Design and research for intelligent teaching platform based on RMXPJingsong Wu, Hongan Li. 186-188 [doi]
• Study on the packet transmission method of audio and videoXinying Liu. 189-192 [doi]
• Airfoil shear probe performance analysis and optimal designBaokuo Chen, Yanhui Wang, Zilong Wang, XueZhong Xiao. 193-196 [doi]
• Bouyancy compensation analysis of an autonomous underwater gliderYijun Wang, Yanhui Wang, Zhigang He. 197-200 [doi]
• Analysis on vibrating forming system considering slowly varying parameterLili Xin, Jihui Liang. 201-204 [doi]
• Research on port cluster based logistics collaborative platform constructionYanjie Deng, Wensheng Cao, Cheng Zhang, Shuran Zhang. 205-209 [doi]
• The comparison of algorithms for sloving the inverse problem of line sourceHangxia Zhou, Peng Zheng, Bin Sun. 210-214 [doi]
• Simulation analysis on the influence of magnetic field distribution caused by motor spindle air-gapLiyan Wang, Lixiu Zhang, Mengyuan Xu. 215-218 [doi]
• Simulation analysis and physical experiment of the inverter's influence on ceramic electric spindle's vibrationLixiu Zhang, Yajing Zhou, Xiaohui Liu. 219-222 [doi]
• The analysis and design of office automation system based on workflowWei Wu, Yong Huang. 223-225 [doi]
• A network based semantic similarity measure for knowledge management in social tagging systemsHai-wei Fan, Chang-li Zhang. 226-229 [doi]
• Review of intelligent video surveillance technology researchCaiyan Yu, Xiaoshi Zheng, Yanling Zhao, Guangqi Liu, Na Li. 230-233 [doi]
• Based on web application front-end performance optimizationPeipei Ling. 234-237 [doi]
• Polarization errors analysis of waveplate in sagnac optical fiber current sensorJinghui Hao, Ping Huang, Xuyou Li, Hanrui Yang, Junwei Yang. 238-241 [doi]
• Application of particle swarm optimization to the identification of thermal property parameters of porous mediaBin Sun, Hangxia Zhou, Cong Yu 0002. 242-245 [doi]
• Design and realization of the LED management system based on PHPYuan Wang, Shuhua Li, Haifeng Zhang. 246-248 [doi]
• ADAMS-based MacPherson front suspension kinematics simulationJihui Liang, Lili Xin. 249-252 [doi]
• Study on the control strategy of hybrid electric vehicle regenerative brakingLing Cai, Xin Zhang. 253-256 [doi]
• The improved elliptic curve digital signature algorithmJunru Hu. 257-259 [doi]
• Decision tree based sub-healthy states detection systemWeitong Huang, Baoxing Jiao, Jiatuo Xu. 260-263 [doi]
• Application and study of 3D alignment technology for the inspection of automobile punching partsHongyuan Zhang, Lingxi Wang. 264-267 [doi]
• Analysis on vibration forming system in consideration of plastic deformation of materialsLili Xin, Jihui Liang. 268-270 [doi]
• The research on multipath routing algorithm of wireless mesh networkHailong Jia, Xiaojie Wang. 271-274 [doi]
• Research on agent-based load balancing model for RFID middlewareHailong Jia, Wang Yun. 275-278 [doi]
• Modeling and simulating of facility layout based on manufacturing costsXiaohong Suo, Xian Chi, Xiaoxia Sun, Hujun Wang. 279-283 [doi]
• Design of motor power assembly mounting systemChao Dai, Jihui Liang. 284-286 [doi]
• Research of word similarity model based on HowNetXuexia Gao, Tao Kuang. 287-290 [doi]
• Design and implementation of wireless power monitoring system for public buildingsShu-ping Le, Hong Zeng, Jian Qiu, Song Zhang. 291-294 [doi]
• Uniform framework for direct volume renderingXiangdong Su, Yongxu Li. 295-298 [doi]
• Serial fingerprint device driver development based on EFIJuntao Xue, Shiming Wang, Jie Shi. 299-302 [doi]
• Research on incremental decision tree algorithmQingyun Chi. 303-306 [doi]
• A new method of chaotic synchronization based on numerical simulationHaigang An. 307-309 [doi]
• Design of purchase, sales and inventory system on B/S modeZhi Hong An, Jian Guang Zhang. 310-312 [doi]
• The basic concepts and types of imagePing Chen, Yong Xia Li. 313-315 [doi]
• Visualization of complicated objects for hydraulic engineering based on OpenGLDewen Seng, Ping Sun. 316-319 [doi]
• Cloud computing and its key techniquesSongjie, Junfeng Yao, Chengpeng Wu. 320-324 [doi]
• Warship brigade complex mission reliability modelingRui Wang, Ying-Wu Peng, Qing-Min Li. 325-328 [doi]
• Mellin transform solution for the model of European optionFeng-lin Cheng. 329-331 [doi]
• Optimization methods for acoustic performance of piezoelectric panel loudspeakerSongmei Yuan, Shouqing Huang, Xiangcheng Chu, Renlong Gao. 332-337 [doi]
• Improved K-DOPs collision detection algorithms based on genetic algorithmsWei Zhao, Lei Li. 338-341 [doi]
• The stability criterion of pumpsFulai Yao, HeXu Sun. 342-344 [doi]
• An efficient algorithm for detecting isomorphism of deployable truss structures using incident degreeYan Wang, Zongquan Deng, Rongqiang Liu, Hongwei Guo. 345-346 [doi]
• Study on performance evaluation and frequency characteristic for real-time image stabilization systemQi Li, Huajun Feng, Zhi-hai Xu, Yue-ting Chen. 347-350 [doi]
• Projection onto convex sets super-resolution image reconstruction based on wavelet bi-cubic interpolationZhifei Tang, Mike Deng, Chuangbai Xiao, Jing Yu. 351-354 [doi]
• An improved best bin first algorithm for fast image registrationHaifeng Liu, Mike Deng, Chuangbai Xiao. 355-358 [doi]
• Design and implementation of embedded secure web server for ARM platformBo Qu, Zhaozhi Wu. 359-362 [doi]
• Effect of annealing on the structure and magnetocaloric properties of Gd5Ge2(Sl2-xAlx) compoundsYong Xin, Xinfa Deng, Guangshen Luo. 363-367 [doi]
• GALBF: Geodesic-Aided LBF methodHaiyong Xu, Guotao Wang. 368-372 [doi]
• Kinetic study of a novel trans-scale precision positioning stage based on stick-slip effectBowen Zhong, Zhenhua Wang, Liguo Chen, Lining Sun. 373-376 [doi]
• Chinese calligraphy system in CADALKai Yu, Bin Hu, Milan Ye, Zhen-ming Yuan. 377-380 [doi]
• Smart antenna receiver implemented in base-band and its performance evaluationHaiyang Fu, Wei Xiao, Qiwang Cai, Hui Yu. 381-384 [doi]
• Adaptive friction identification and compensation based on RBF neural network for the linear inverted pendulumLian-Kui Qiu, Yu-zhu Zhao, Yan-xia Zhang. 385-388 [doi]
• A mechatronics educational laboratory platform for manufacturing automation based on Googol FMSXuemei Huang. 389-392 [doi]
• Research on driving characteristics of double-articulated bus docking the bay bus stationKan Zhao, Qiang Li, Guosheng Zhang, Wei Wang, Zhongxiang Li. 393-396 [doi]
• Research of the nonlinear torsional vibration of the marine diesel generator shaft systemMengsheng Wang, Ruiping Zhou, Xiang Xu, Yanguo Wang. 397-400 [doi]
• Pressure and stress analysis for an underwater vehicleYanhui Ai. 401-403 [doi]
• Data-driven model-free direct adaptive generalized predictive control for linear motor based on cSPACERongmin Cao, Huixing Zhou, Zhongsheng Hou, Keshuai Jia. 404-408 [doi]
• Application research of knowledge management and engineering for production design organizationYongdang Chen, Xiao Xiao, Huijuan Ren, Meihong Shi. 409-412 [doi]
• Implementing intelligence and distributed execution mechanism for flywheel energy storage system in micro gridXuemei Huang. 413-416 [doi]
• An algorithm of multi-stroke combination in the automotive stylingQiang Li, Nan Qi, Yongjian Gong. 417-420 [doi]
• Ducted fan UAV hovering attitude controlXiao-lu Ren, Chang-hong Wang, Guo-xing Yi. 421-424 [doi]
• 3D Sketching in AutoSketchQiang Li, Xianfei Zhao, Changfu Zhao, Yongjian Gong. 425-428 [doi]
• The influence of natural weathering on the property of polyester fabricHuifeng Tan, Xianghong Bai, Guochang Lin. 429-432 [doi]
• Geometry standardization of arbitrary multi-stroke sketchingQiang Li, Yanping Tang, Yongjian Gong. 433-436 [doi]
• Improved parameterization method and its application on solving optimal control problemChao-jiang Hu, Quan-fa Yang, Xiao-chong Li, You-zhi Yuan. 437-439 [doi]
• Study of PID simulation based on PMAC servo systemBaozhong Qu, Hongying Wang. 440-443 [doi]
• Research on structural design of robot leg based on Pro/eErbao Peng, Ling Yu, Hongying Wang. 444-447 [doi]
• Research of rolling bearing fault diagnosis based on waveletErbao Peng, Yingzhan Hu, Hongying Wang. 448-450 [doi]
• Application of fuzzy control in temperature control systemsZengfang Shi, Chao Wang. 451-453 [doi]
• Research on the thermal deformation field of exhaust valve for high temperature steam booster pump based on ANSYSBo Wu, Jianying Li, Jincheng Li, Junpeng Shao. 454-457 [doi]
• Research on the pressure field of hydrostatic center restBo Wu, Zhi Huang, Junpeng Shao, Xiaodong Yu. 458-461 [doi]
• Analysis of melt fracture during the process of macromolecule material's extruding mouldingMing Xu. 462-465 [doi]
• Time-domain analysis and research on blasting vibration signals based on Fourier transformBaoquan Geng. 466-469 [doi]
• Similarity theory which used in knuckle-joint press designDanhong Li. 470-473 [doi]
• Data base management system accounting softwareHongxia Zhong. 474-476 [doi]
• Load adjusting system of independent wind power generationYiming He. 477-480 [doi]
• Combustion performance of vehicle diesel motorDeLiang Wang, Yugai Gao. 481-484 [doi]
• Network electric energy meter designYujun Bao, Xiaoyan Jiang. 485-488 [doi]
• Research on expert system model based on SWRLZhengyun Ren. 489-492 [doi]
• Analysis of chemical constituents of volatile oil of scrophularia ningpoensis hemsl GC-MSChi Zhang, Shao-Liang Chen, Xing-Ping Liu. 493-496 [doi]
• Study on isolation and identification of the Lactic acid bacteria in airing wuchang fish and production performance of strainsJunren Zhao, Rulan Wang, Weili Hong, Rong Zhang. 497-501 [doi]
• Study on the control of biological behavior on carp induced by electrophysiological stimulation in the corpus cerebelliYong Peng, Yunhui Wu, Yulin Yang, Runan Huang, Changqi Wu, Xiaowen Qi, Zhe Liu, Bin Jiang, Yingjie Liu. 502-505 [doi]
• Studies on the influence of sputtering parameters on magneto-optical properties of GdTbFeCo thin filmsZhixin Huang, Ji-hua Guo, Lei Yang, Jian-bo Shao. 506-508 [doi]
• The realization of polynomial fit between EMF and temperature changes based on least squares fitLu Yi, Wu Yu Ping. 509-512 [doi]
• The design of a symbol timing method in high-level modulation systemZhongqiao Zheng, Zhen Wang, Yanhong Zhang. 513-515 [doi]
• Research on PID controller based on the BP neural networkYanhong Zhang, Dean Zhao, JianSheng Zhang. 516-519 [doi]
• Discussion on the Thevenin's theorem and Norton's theoremHongyang Zhao. 520-522 [doi]
• Novel algorithm for frequency estimation of sinusoid signal with random lengthGang-bing Zhang. 523-526 [doi]
• New undergraduate college students common psychological problems and intervention strategiesYa-ping Xu, Wen-zhong Li. 527-530 [doi]
• Design of three-lift controller based on FPGAXiaoyan Jiang, Yujun Bao. 531-533 [doi]
• The research on the influences of relative factors for factual depletion layer characteristics in MOSFETsQing-long Li. 534-537 [doi]
• Research on fault recognition method based on variable-risk SVMFuzhou Feng, Aiwei Si, Chaosheng Zhang. 539-543 [doi]
• A visual analysis system for sewage treatment dataHaichun Qin, Yi Chen. 544-547 [doi]
• Simulation of the Non-Gaussian scattering approximation model on rough sea surfaceGuoxing Gao, Zhenzhan Wang, Hao Lu. 548-551 [doi]
• S plane control based on parameters optimization with simulated annealing for underwater vehicleYushan Sun, Lei Wan, Yueming Li, Liwei Li, Guocheng Zhang. 552-556 [doi]
• Finite element analysis of hot-rolled seamless pipe rolling process elastic-plastic deformationChang Li, Guangbing Zhao, Xing Han. 557-560 [doi]
• An improved threshold cluster analysis algorithm for the energy consumption optimization of the aluminum industrial productionXiaofang Lou, Wei Zhang, Junxian Liu, Huihua Cheng, Fengxing Zou. 561-566 [doi]
• Study on the straightening quality of steel pipe based on the computer numerical simulation technologyQiubo Huang, Wen Zhang. 567-570 [doi]
• A face and eye detection based feedback system for smart classroomSong Yang, Lin Chen. 571-574 [doi]
• Research on virtual manufacturing models of a new type of taper ball-end milling cutterGuangming Lv, Jian Wang, Xiaomeng Sun. 575-578 [doi]
• Experiment and simulation of torsional vibration based on sensorless detection technology under variable-frequency power sourcesXianjiang Shi, Qingchun Meng, Han Sun, Linjie Chai. 579-583 [doi]
• CFD detection for inner flow and presure fluctuation in a hydraulic tubineRuzhi Gong, Hongjie Wang, Yang Yao, Fengchen Li, Daqing Qin. 584-587 [doi]
• Study of leakage and stability in labyrinth seal using CFDWensheng Ma, Zhusheng Liu, Zhaobo Chen. 588-591 [doi]
• Leakage and whirl speed study in labyrinth seal using CFDWensheng Ma, Zhaobo Chen, Yinghou Jiao. 592-595 [doi]
• Optimization and analysis on unmanned electric light armored reconnaissance vehicle gearboxXiao Zheng, Jie Mi. 596-599 [doi]
• The data collection of hybrid traffic simulation systemYongqing Jiang, Jingrui Zhao, Yang Liu, Zhonghua Wang, Bingxin Wei, Tianling Lv. 600-603 [doi]
• Economic production quantity model research based on facility layout planningJunzheng Huang, Aiping Li, Liyun Xu. 604-608 [doi]
• An electric power monitoring and management system based on wireless sensor networkXianwei Rong, Xiaoyan Yu. 609-612 [doi]
• Ageing condition inspection system for electrical contact based on micro-current contact resistance trend trackerShi-jie. 613-616 [doi]
• Integrating multi-relations and multi-domains in qualitative spatial reasoningSheng-sheng Wang, Dayou Liu. 617-620 [doi]
• Automatic Speech Emotion Recognition using Support Vector MachinePeipei Shen, Changjun Zhou, Xiong Chen. 621-625 [doi]
• Research on algorithm of state recognition of students based on facial expressionChangjun Zhou, Peipei Shen, Xiong Chen. 626-630 [doi]
• Embedded forest fire monitoring and positioning system based on machine visionLongshen Liu, Mingxia Shen, Xianlin Zhao, Yuwen Sun, Mingzhou Lu, Yingjun Xiong. 631-635 [doi]
• Research on security issues in Wireless Sensor NetworksXiaowang Guo, Jianyong Zhu. 636-639 [doi]
• Relation discovery in medicine through Semantic Graph RoutingChao Wang, Huajun Chen, Peiqin Gu, Tong Yu. 640-644 [doi]
• Influence analysis of terramechanics on conceptual design of manned lunar rover's locomotion systemZongquan Deng, Xuebing Fan, Haibo Gao, Liang Ding. 645-648 [doi]
• Research on multi-objective location-routing problem (MLRP) with random analysis for regional distributionZhang Qian. 649-653 [doi]
• Parameters estimation of LFM signal based on fractional order cross spectrumKaihui Ding, Qun Ding, Run Zhe Lan. 654-656 [doi]
• Hydrodynamic performance calculation and motion simulation of an AUV with appendagesJinxin Zhao, Yumin Su, Lei Ju, Jian Cao. 657-660 [doi]
• Research and applications on a soak boiler with the thermal insulating layer in pulping and paper making techniqueJianing He, Wei Zhang, Lifang Yang, Hongshen Zhang. 661-665 [doi]
• Algorithm analysis for a rover simulation platformHaibo Gao, Weihua Li, Liang Ding, Zongquan Deng, Zhen Liu, Junlong Guo. 666-669 [doi]
• A self-adapting improvement Particles Swarm Optimization algorithm and application in Multi-Criteria Group Decision-makingZidan Shan. 670-673 [doi]
• The analysis on the singularity of a 3-UPS Parallel Machine ToolJianye Guo, Yanli Zhang, Jiashun Shi. 674-677 [doi]
• Research on casing wear monitoring technique based on detection of tool joints and its field testShengli Chu, Laibin Zhang, Jianchun Fan, Jiye Sun, Yuqi Pei. 678-682 [doi]
• An energy efficient cross-layer MAC for wireless sensor networksGuoyan Yang, Guoyin Zhang. 683-686 [doi]
• A power control algorithm based on non-cooperative game for wireless sensor networksGuoyan Yang, Guoyin Zhang. 687-690 [doi]
• Vibration characteristic analysis of spot-welding robot based on ADAMS/VibrationHaitao Luo, Yuwang Liu, Hongguang Wang, Weijia Zhou. 691-695 [doi]
• Web caching system research and implementation of clusterXincan Fan. 696-699 [doi]
• Coal mine reconfigurable monitoring model based on Wireless Sensor NetworkDeng Pan Zhang, Rui-Hong Wang, Jian Fa Cai. 700-703 [doi]
• Electronic system design of ultraviolet ozone vertical profile probe for aerography satelliteKefei Song, Shurong Wang. 704-707 [doi]
• Self-configuration model of service on large-scale server cluster systemZhenghua Xue, Jianhui Li, Yuanchun Zhou, Kang Chao, Weiguo Zhang. 708-712 [doi]
• ZnO-Bi2O3-based varistor ceramics prepared by direct high-energy ball milling of the dopantsDong Xu, Biao Wang, Mingshuang Li, Xiao-ye. 713-716 [doi]
• Design of automotive CAN network management based on OSEK standardYanwen Li, Jinfeng Gong, Hongwei Zhang, Hui Rong. 717-721 [doi]
• Electronic transport and photovoltaic properties of La0.4Ca0.6MnO3/Si heterojunction at high temperatureX. J. Liu, H. Ni, K. Zhao, S. Q. Zhao, Yu-Chau Kong, H. K. Wong. 722-724 [doi]
• Effects of oxygen stoichiometry on the photovoltaic properties of La0.4Ca0.6MnO3-δ epitaxial films grown on miscut MgO substratesD. Yu, H. Ni, K. Zhao, S. Q. Zhao, S. L. Da, W. S. Zhang, P. R. Yang, Yu-Chau Kong, H. K. Wong. 725-728 [doi]
• Canonical signed digit encoding based optimal design for FIR filtersQi Yue, Caiwen Ma, Xin Wang. 729-732 [doi]
• Multi-objective optimization design of mining truck wheel reducer based on analysis of fatigue lifeJianCheng He, Yanhua Shen, Wenming Zhang, Bo Zhang. 733-736 [doi]
• Research on modeling, simulation and control of new type power split hybrid powertrainJiuyu Du, Hewu Wang. 737-741 [doi]
• Experiment and simulation research of engine cooling fan in dump truckYe Yao, Wenming Zhang, BoQiang Shi, CaiZheng Wang. 742-745 [doi]
• Analysis and modeling for the framework structures of light-of-sight stabilization tracking platformGu Yang. 746-749 [doi]
• EEG signal decomposition using wavelet packet on DSPLei Sun, Jinhua Zhang, Sunan Wang, Xiaohu Li. 750-753 [doi]
• Design of active disturbance rejection controller for the velocity loop of optical tracking servo systemJie Xu. 754-757 [doi]
• Factors analysis of the sound field for audio directional systemsYang Zhang, Limin Tao. 758-761 [doi]
• Analyzing system of electric signals in spot welding processRu-xiong Li, Xiao-chun Lei. 762-766 [doi]
• The third superharmonic resonance of inclined beam subjected to harmonic excitation in temperature fieldGao-feng Li, Zhi-an Yang, Xiao-yan Xi. 767-770 [doi]
• Study on torque ripple reduction of direct torque control system based on DSVMBo Fan, Guanghui Shi, Yixin Yin, Cunfa Fu, Juwei Zhang. 771-774 [doi]
• The higher order asymptotic fields for anti-plane oblique crack with physical weak-discontinuityYao Dai, Shimin Li, Lei Zhang, Junfeng Liu, Xiao Chong. 775-778 [doi]
• 3D Reconstruction of metal parts based on depth from focusKaige Qin, Zhongren Wang. 779-781 [doi]
• Analysis of the bullwhip effect based on different information sharing modelsYao Xiao, Gang Zhao, Chunhua Yin. 782-786 [doi]
• Integration of PEM fuel cell/battery powertrain: EMI noises and power split strategyLiangfei Xu, Jianqiu Li, Minggao Ouyang, Jian Feng Hua. 787-792 [doi]
• In-material measurement technique for brittle materials subjected to shock loadingSonglin Xu, Yonggui Liu, Hang Zheng, Daorong Wang. 793-796 [doi]
• Quadrature formula for some classes of analytic functionsPeixin Ye. 797-799 [doi]
• Dynamic identifying and tracking framework for cutters using RFID technology in digital workshopGuanghui Zhou, Zhongdong Xiao, Ben Wang, Pingyu Jiang. 800-803 [doi]
• Heat flux analysis of space camera with thermal doorQiang Dou, Jindong Li, Zengfu Pan. 804-807 [doi]
• A stochastic model checking method for the usability of clusters about distributed rendering systemKemin Wang, Yongbin Wang. 808-812 [doi]
• Design and realizing of the lightweight cable digital television data analysis systemQiaogong Dong, Yujun Wen, Pengzhou Zhang, Jiuqiang Jiang. 813-815 [doi]
• 3+-doped silica-based glass for high power laser applicationsChangMing Xia, Ying Han, GuiYao Zhou, LanTian Hou. 816-819 [doi]
• The design and flow simulation of the volute casing of a mixed flow pumpChunjun Ji, Yang Wang. 820-823 [doi]
• Bouyancy compensation analysis of an autonomous underwater gliderYijun Wang, Yanhui Wang, Zhigang He. 824-827 [doi]
• Design of VxWorks-based software architecture for space optical remote sensorYu Tao, Kefei Song. 828-831 [doi]
• The design and implementation of MDF incoming power disturbance alarm systemLi Yang, Changyin Liang, Linfang Yang. 832-836 [doi]
• Optimum design and research on the involute gear tooth profileJianing He, Wei Zhang. 837-840 [doi]
• A customized dynamic array for job scheduling queue of a large-scale server clusterZhenghua Xue, Jianhui Li, Geng Shen, Yuanchun Zhou, Yang Zhang. 841-844 [doi]
• The application of PID controller optimized by genetic algorithm in valve-controlling asymmetrical cylinder systemDacheng Guo, Xiaoye Qi. 845-848 [doi]
• 3-DOF MEMS Gyroscope modeling and designXuguo Huang, Ping Sun, Zhi Wang. 849-852 [doi]
• Reserch on the valuation model of technical enterprisesXiao-Lei Wang, Zuwei Tan, Xuehong Chen. 853-855 [doi]
• Application PTS reduce PAPR OFDM system technologyYa-min Wang, Li-ying Ban, Rui-Qiang, Xiao-Min Wang. 856-858 [doi]
• Motion error analysis of modular self-reconfigurable robot M-Cubes based screw theoryQiuxuan Wu, Yanbin Luo, Xiaoni Chi, Xiaochun Lou. 859-866 [doi]
• Modeling and simulation of flow field of main spool in servo valveHuang Hao, Lei Huihu. 867-870 [doi]
• Research of non-servo valve electro-hydraulic servo systemGeqiang Li, Hanjie Wang, Xiaodong Huang. 871-874 [doi]
• Kinematic simulation of polishing head oscillating mechanism based on COSMOSMotionJunpeng Shao, Mingshan Chi, Yanqin Zhang, Bin Xu. 875-878 [doi]
• Implementation of TS streams pack/unpack and transport in DSPYingchao Han, Hongmei Li, Jinghui Qiu. 879-882 [doi]
• The analysis and summary about energy saving technologies of wireless sensor networkYingchao Han, Hongmei Li, Jinghui Qiu. 883-885 [doi]
• Signal characteristic extractio of wood defects based on wavelet packetHuimin Yang, Lihai Wang, Yumei Wang. 886-889 [doi]
• Research and realization on the control strategies of blow-down supersonic wind tunnelWeihua Chu. 890-893 [doi]
• Research on energy characteristics of aerospace relay mirror systemChunyu Liu, Xing Zhong, Yongjie Piao, Guang Jin. 894-896 [doi]
• Intelligent green production of raw materials in ceramic technology of choiceRu Zhang, ChangHu Chen. 897-900 [doi]
• Wavelet neural network based intelligent assessment of ceramic green technology researchRu Zhang, ChangHu Chen. 901-904 [doi]
• Research on cutting tool paths optimization of ZrB2 CNC grinding based on parametric curve interpolatorLi Xu, Hongbin Du. 905-907 [doi]
• Detection system of meter pointer based on computer visionYanwen Li, Hongwei Zhang, Jinfeng Gong, Hui Rong. 908-911 [doi]
• Research on thermal deformation field of heavy hydrostatic thrust bearing rotation-workbench at different auxiliary-hole positionJunpeng Shao, Xiaodong Yang, Yunfei Wang, Xiaoqiu Xu, Yanqin Zhang, Xiaodong Yu. 912-915 [doi]
• Design of reduced-order H∞ controller for uncertain discrete system based on observerJixiang Li, Junfeng Wu, Peng Wang. 916-919 [doi]
• Analyze the relationship between slowlight effect and parameters of double-parallel-microring structureTiancong Wang, Guang Jin, Mei Kong. 920-923 [doi]
• Study on rotary impeller refinement of 4004 Al alloyYarding Zhao, Erjun Gou, Guojian Cao, Pengao Xu, Xinyu Lv, Guojun Wang, Lin Ma. 924-927 [doi]
• Effect of Cerium addition on microstructure and mechanical properties of 4004 aluminum alloyYanling Zhao, Fengling Wu, Jianjiao Zhang, Guojian Cao, Erjun Guo, Chaojun Zhang. 928-931 [doi]
• Application of moment invariants in checking the overall dimension of the head coverXu Li, Fei Sha. 932-935 [doi]
• Modeling analysis and simulation research for a flexible vehicle arresting systemLiantao Ding, Xinhui Liu, Jinshi Chen, Qingbo Zhao. 936-939 [doi]
• Research on influence of return oil groove width on temperature field of hydrostatic thrust bearing with multiple oil padsXiaoqiu Xu, Junpeng Shao, Yunfei Wang, Chunxi Dai, Xiaodong Yang, Yanqin Zhang, Bo Wu. 940-943 [doi]
• State estimation and simulation of the magnetic levitation system of a high-speed Maglev trainGuangwei Shu, Reinhold Meisinger. 944-947 [doi]
• Effects of key factors on load-carrying capacity of radial static air bearingMingde Duan, Wuguo Zhang. 948-950 [doi]
• Modal analysis of compound grinder for grinding end face and inner holeMingde Duan, Boyin Li. 951-953 [doi]
• The simulation and experimental analysis for pneumatic drying of biomass stalkWei Lv, Yandong Li, Ruiyang Li, Qunyi Zhu. 954-957 [doi]
• Numerical simulation and analysis of pneumatic drying on straw fuelWei Lv, Hongwei Sun, Ruiyang Li, Qunyi Zhu. 958-962 [doi]
• Simultaneous localization and map building based on improved particle filter in grid mapKun Wang, Liying Su, Shucai Wang, Yueqing Yu. 963-966 [doi]
• Research on fuzzy energy management strategy of parallel hybrid electric vehicleMeilan Zhou, Hao Zhang, Xudong Wang 0002. 967-971 [doi]
• Simulation analysis and validation on aerodynamics of tunnels on high speed railwaysYahui Wei, Hongmei Li, Lan Wang. 972-975 [doi]
• Moving object detection and tracking in indoor environmentShucai Wang, Liying Su, Kun Wang, Yueqing Yu. 976-979 [doi]
• Measuring system for mobile robot based on multiple sensorsYong Qin, Jing Hou, Lijie Wang. 980-983 [doi]
• Operation characteristics of organic semiconductor copper phthalocyanine bipolar mode thin film transistorDong-Xing Wang, Bing Bing Jiao, Yue Wang, Yue Liu, Hong Zhang. 984-986 [doi]
• Sliding mode based speed regulating of PMSM MTPA control system for electrical vehiclesNingzhi Jin, Xudong Wang 0002, Hanying Gao, Jinfeng Liu. 987-992 [doi]
• Study for speed management technology of national roadJian Zhang, Xiaoming Zhong, Jia Jia, Xiaoyan Zhu. 993-997 [doi]
• Concepts of village roads safety facilities constructionJian Zhang, Jia Jia, Xiaoming Zong, Xiaoyan Zhu. 998-1001 [doi]
• Designing of single phase electricity meter based on ADE 7755Guoxu Zheng, Mingxin Song, Yunlong Dai, Tong Wu, Yu Zhao. 1002-1005 [doi]
• The research and design of oil field associated gas recovery deviceXiufen Xu, Yongqiang Hou, Ying Cao, Lijun Wei. 1006-1008 [doi]
• An advanced processing technology for fairing made of zirconium diboride composite materialLi Xu, Guang Yang, Shubo Liu, Minjie Zhu. 1009-1012 [doi]
• Technological parameters simulation of cutting red copper by wire cut electrical discharge machiningLi Xu, Chao Liang, Ke Wu. 1013-1016 [doi]
• State feedback control of saturated switched systems and its application to turntableWenhu You, Ming Yan, Mao Wang, Yongheng Yue. 1017-1020 [doi]
• Simulation research on FLS_SVM in sensor fault diagnosisSen-Yue Zhang, Yi-Bo Li. 1021-1024 [doi]
• Transient optimization of drive control strategy for pure electric passenger carHongwei Liu, Wenwen Guo, Liang Chu, Xiaowei Hao. 1025-1028 [doi]
• An improved regional stabilization method for time-delay system with actuator saturationMao Wang, Yue Gu, Guoqing Li. 1029-1032 [doi]
• Application of heat pipe technology in the design of hydraulic motor pumpYongling Fu, Meng Zhang, Haitao Qi, Gaocheng An. 1033-1036 [doi]
• Study on control strategy of regenerative braking for electric bus based on braking comfortHongwei Liu, Xiaoyin He, Liang Chu, Junhui Tian. 1037-1040 [doi]
• Research of the model for current transformer in real-time simulation of electric power systemGuangwei Shu, Wen Zang. 1041-1044 [doi]
• Dynamic control for low cost auxiliary power unit of electric busXiaogang Wu, Fuyuan Yang, Languang Lu, Minggao Ouyang. 1045-1049 [doi]
• Realization on identification and compensation methods for the temperature model of hemispherical resonator gyro (HRG)Yangguang Xie, Guoxing Yi, Yansheng Jia, Changhong Wang. 1050-1053 [doi]
• The effect of spinning missile on the position calculating of the reticle infrared detecting systemEnde Wang, Feng Zhu, Yanghui Xiao, Xinxin Tong, Dan Zhu. 1054-1057 [doi]
• Sliding mode rotation speed control on secondary regulation hydraulic systemXin Wang, Wei Chen, Ancai Yu. 1058-1061 [doi]
• Traction and yaw-rate control of 4WD vehicle with drive force distributionHui Lu, Jing Li, Bing Zhu, Yuelei Gao, Bohua Sun. 1062-1065 [doi]
• Research on the sliding mode based ADRC for hydraulic active suspension of a six-wheel off-road vehicleMina Shi, Xinhui Liu, Yaowu Shi, Wei Chen, Qingbo Zhao. 1066-1069 [doi]
• Research of control algorithm of medical balance bedYangyang Ma, Jie Mi. 1070-1074 [doi]
• New rapid prototyping manufacturing technologyDe-Xin Zhang, Ji-Xian Zou, Xue-Bo Shao, Jian-Ming Guo. 1075-1078 [doi]
• Design of remote monitoring and fault diagnosis system for electric vehicleHongwei Liu, Jianrong Wu, Liang Chu. 1079-1082 [doi]
• Research on influence of oil cavity shapes on carrying capacity of heavy hydrostatic bearingYanqin Zhang, Chunxi Dai, Yunfei Wang, Bo Wu, Xiaodong Yu, Bai Qin. 1083-1086 [doi]
• Numerical simulation on cavity type influence of multiple oil pad hydrostatic guide fluid stateChunxi Dai, Junpeng Shao, Xiaoqiu Xu, Yanqin Zhang, Xiaodong Yu, Bai Qin, Bo Wu. 1087-1090 [doi]
• The mechanical performance analysis of grid structures with foam under the tests of quasi-static and dynamic loadingsLu Xia Mei, Ma Yun Fei, Zeng Tao. 1091-1094 [doi]
• Stiffness simulation analysis of rubber bush mountingsBai Qin, Bo Zhang, Xiaodong Yu, Yanqin Zhang, Guihua Han, Jianying Li. 1095-1098 [doi]
• Structural design of a cartesian coordinate tooth-arrangement robotYong-de Zhang, Jin-gang Jiang, Ting Liang. 1099-1102 [doi]
• Rubber paint feeling characteristic analysis and its application in product designJian-Yi Zhang, Qiang Du, Li Zhang, Bo Wu. 1103-1106 [doi]
• Non-equant roll calender's structure design and analysisMing Xu. 1107-1110 [doi]
• Research on the application of green function approximation in the quantum super magnetsBaoquan Geng. 1111-1113 [doi]
• Investigation and study of Reverse Engineering and CAD/CAM integration in mold manufacturingT. Suresh Babu, V. Udaya Bhaskara Reddy. 1115-1118 [doi]
• Zinc oxide hexagram microrodsXing-Yuan Guo, Zhan-Hui Ding, Jing Zhou, Da-Peng Xu. 1119-1121 [doi]
• Rail pressure control of common rail diesel engine based on RBF neural network adaptive PID controllerZhongming Ji, Xuan Xie, Zhiqiang Sun, Peizhi Chen. 1122-1125 [doi]
• Composition of L-shaped grounded reflector with planar monopole array to explore fan-beam antenna characteristics for DECT, 3G and 4G wireless applicationsMansour Nejati Jahromi, Mahdi Naghshvarian Jahromi. 1126-1129 [doi]
• Design of new suspension for four-wheeled independent steering electric automobileZhurong Dong, Zhijun Deng. 1130-1135 [doi]
• Using concurrent engineering technology to design a satellite assemblyYongxin Gao, Dong Yang, Zhijia Liu. 1136-1138 [doi]
• Emission and combustion characteristics of different fuel in a HCCI engineWing Commander M. Sekaran, S. Mohanamurugan. 1139-1142 [doi]
• Homogenous charge compression ignition (HCCI) engine operating with diesel and bio-diesel using an secondary injectorWing Commander M. Sekaran, S. Mohanamurugan. 1143-1146 [doi]
• Instantaneous feature extraction of non-stationary signal based on complex Morlet waveletHuailin Ruan, Jiren Xu. 1147-1150 [doi]
• Reentry trajectory planning based on genetic optimization of terminal matchingYihua Tang, Shilu Chen, Min Xu. 1151-1155 [doi]
• Investigation of a novel green internal cooling in turning applicationShengrong Shu, Shijin Chen, Kai Cheng. 1156-1159 [doi]
• Research on ellipse vibration grinding finishing technologyPeng Zhang, Xingyu Guo, Zhiguang Guan. 1160-1163 [doi]
• Precision forming technology and application for high-precision sandwich reflector panelsChao Jiang, Dongsheng Li, Guofeng Zhou, Hongyu Luo. 1164-1168 [doi]
• Design of networked monitoring system of PV grid-connected power plantChengmei Lin, Guisheng Jie, Zhenxing Wu, Wanzhi Rui. 1169-1172 [doi]
• Ship swaying data denoising via multiscale manifold representationZhenyu Zhao, Fengxia Yan, Jubo Zhu. 1173-1176 [doi]
• Extracting subtle feature of target signal based on double tree complex wavelet transformationJihai Liu, Dongsheng Li, Jiren Xu, Jiasong Cheng, Huaihui Gao. 1177-1180 [doi]
• Root locus approach in variable eigenvalues controlQinnan Ji. 1181-1184 [doi]
• Analysis of flow field across blunt fin with dimples - ExperimentationWing Commander Muthu Kumara Samy Sekaran, B. Achu Naik. 1185-1188 [doi]
• Multi-model predictive functional control for a nonlinear systemLei Zhou, Shumin Fei. 1189-1192 [doi]
• Application of phased array ultrasonic technology for nondestructive testing of railway wheelsLi Wang, Xiaojuan Li, Jianping Peng, Jinlong Li. 1193-1196 [doi]
• A survey of study of FlexRay systems for automotive netXuewen He, Qiang Wang, Zhenli Zhang. 1197-1204 [doi]
• Kinetic study of bacterial adhesion on biomaterials by using optical waveguide lightmode spectroscopyH. H. Chien, K. J. Ma, Jeremy J. Ramsden, Y. P. Yeh. 1205-1208 [doi]
• Modeling of a new multiple input converter configuration for PV/battery system with MPPTBoyang Hu, Swamidoss Sathiakumar. 1209-1214 [doi]
• Preparation of superhydrophobic surface for PTFE/ePTFE materials by oxygen plasma treatmentHsi-Hsin Chien, Kung-Jeng Ma, Yun-Peng Yeh, Choung-Lii. Chao. 1215-1218 [doi]
• IT talent demand forecast and research in Dongguan based on Grey System TheoryWenliang Cao, Dingxiu He, Xuanzi Hu. 1219-1222 [doi]
• A mixed de-nosing method of digital image based on removed-noise thresholdLina Zhang, Jiaqing Tu, Zhimin Wang. 1223-1226 [doi]
• A design of a SmartCrown work roll profileZi-ping Liu, Run-quan Gao, Guang-hui Yang. 1227-1229 [doi]
• Power distribution network reconfiguration based on fuzzy control theory and ant colony algorithmDalu Guan, Ailong Fan. 1230-1232 [doi]
• Optimal control system of coke oven collector pressure controlXuejun He, Rui Chen. 1233-1236 [doi]
• Application of fuzzy neural network in fault diagnosis of hydraulic systemLi Zhang, Yong Zhao, Yihe Xu. 1237-1240 [doi]
• Research on pusher and ejector in seeder of cell rotary-plateGuixiang Tao, Shujuan Yi. 1241-1244 [doi]
• The research on dynamic performance of 200 km/h CRH2 EMU vehicleFusheng Li, Di Cheng. 1245-1251 [doi]
• Cloaking of heat flux and temperatureLunwu Zeng, Runxia Song. 1252-1255 [doi]
• Optimization of motion estimation and integer transform and quantization in H.264Xue Han, Feng Li. 1256-1259 [doi]
• A novel robust adaptive time delay estimation methodWenhong Liu. 1260-1262 [doi]
• Intelligent fault diagnosis for analog circuitsRui Chen, Zhenchao Zhou. 1263-1266 [doi]
• Establishment of seabed soft sediments pressure-sinkage modelHongyun Wu, Qiuhua Rao, Xinming Chen, Yuqing Gao. 1267-1270 [doi]
• Computer simulation and analysis of deepwater Steel Catenary RiserYongqiang Dong, Liping Sun. 1271-1274 [doi]
• Design of province-level information system of the development and reform commission based on portal websitesYong Yang, Zhengyou Liang. 1275-1277 [doi]
• The wear analysis for cam mechanism of diesel fuel injection pump based on multibody dynamics theoriesXinying Wu, Guangyao Ouyang, Di Tan. 1278-1282 [doi]
• The analyzing of a cascaded multilevel class-D power amplifier with the carrier-based phase-shifted modulationYing Zhang, Ming Dong, Ling Cai, Qing-De Meng. 1283-1286 [doi]
• PMSM speed control simulation based on sliding mode variable structureYaguang Chen, Shuangyuan Zhao. 1287-1290 [doi]
• Transmitting circuit design for ultrasonic transducerXiaorong Gao, Xiaomei Sun, Chaoyong Peng, Jianqiang Guo. 1291-1293 [doi]
• A new detection circuit design based on DDC264Yanbin Li, Chuan Jin, Xueliang Chen, Feng Gao, Yunfeng Shi. 1294-1296 [doi]
• A new model for robust Wardrop's user equilibrium under uncertaintiesMoli Xu, Ping Cheng, Ming Wang. 1297-1300 [doi]
• PWM speed control system of DC motor based on AT89S51Zhijun Liu, Lianzhi Jiang. 1301-1303 [doi]
• Design and implementation of Square-Cabin Environmental Parameters Monitoring System based on the virtual instrumentBiao Lai, Huiqin Jia. 1304-1307 [doi]
• Development of CPU module test device based on the virtual instrumentHuiqin Jia. 1308-1312 [doi]
• Transmission properties of guiding band in one-dimensional slow wave structuresXia Li, Kang Xie, Hai-ming Jiang. 1313-1316 [doi]
• Research on the intelligence and assistant technology of the virtual maintenance system of armored vehicles transmitter-receiverBin He, Hongzhou Zhao, Jun Ye. 1317-1320 [doi]
• A FPGA LED controller for SoCXiao Luo, Limin Liu. 1321-1323 [doi]
• The reconfigurable IP modules and designLimin Liu, Xiao Luo. 1324-1327 [doi]
• The solution of ethernet based on hardware protocol stack W5300 and FPGAYunfeng Shi, Chuan Jin, Feng Gao. 1328-1331 [doi]
• The spectral image acquisition and processing system based on folded gratings spectrograph and ICCDYunfeng Bi, Fujun Qi, Jinjia Guo, Ronger Zheng. 1332-1335 [doi]
• Topological analysis of deployment chassis of NomadXuebing Fan. 1336-1339 [doi]
• The ESR characters of unintentionally doped 4H-SiC with Si ion implantedPing Cheng, Ming Wang, Lizhi Wang, YuMing Zhang, Hui Guo. 1340-1342 [doi]
• Optimization model of armored equipment inventory based on system dynamicsQisheng Guo, Huankai Yu, Zhiming Dong, Jinghua Song, Liang Li. 1343-1346 [doi]
• Construction of test question database for electrical and electronic technologyPeijiang Chen. 1347-1350 [doi]
• Design and implementation of hotel call accounting systemXuehua Jiang. 1351-1354 [doi]
• Microstructure and magnetostrictive properties of as cast Fe83Ga17Tbx alloysPei Gong, Z. Q. Zhao, L. P. Jiang, S. X. Wu, G. R. Zhang, H. B. Hao. 1355-1358 [doi]
• Analysis and simulation of the property of oil film of the slipper in axial piston pumpYi Sun, Jihai-Jiang, Yu Zhou. 1359-1362 [doi]
• Research of RBAC access control model based on LDAP tree storageLongying Lian, Chunyu Song. 1363-1365 [doi]
• Study on the effect of information-oriented DEA on technology innovationDandan Shi, Kexin Bi. 1366-1371 [doi]
• Multi-channel and high-reliability temperature acquisition system based on RS422 and USB busYanjun Zhang, Xianmin Bai, Jianhua Zhan, Yating Zhang. 1372-1376 [doi]
• The grey relational analysis on various modes of transportation in ChinaJuan Wu, Xian-Feng Liu, Li-Cheng Hu, Xu Sun. 1377-1380 [doi]
• Optimal control of two-level quantum systems based on the geometrical parametrizationJiahua Wei, Fengxing Zou, Pengfei Liu. 1381-1384 [doi]
• A novel approach to solving weapon-target assignment problem based on hybrid particle swarm optimization algorithmBo Zhu, Feng-xing Zou, Jia-hua Wei. 1385-1387 [doi]
• A novel method for packing unequal circles into a rectangular containerYing Shang, Jizheng Chu, Zhengbao Zhao. 1388-1391 [doi]
• The improved algorithm of D-S theory based on computer simulationRongli Chen, Chunyou Dong. 1392-1395 [doi]
• Templated electrodeposition of single-crystal ZnO nanorodsMin Lai, Yan Ma, Xiang Li. 1396-1399 [doi]
• 4-axis micro ED-milling of micro 3D structures on cylindrical workpiece based on CAD/CAM commercial softwareYukui Wang, Wang Qi, Zhi Cai, Zhaoqi Zeng, Zhenlong Wang. 1400-1403 [doi]
• Study on the hydrodynamics and kinematics of a biomimetic fin propulsor actuated by SMA wiresZhengbao Yang, Yukui Wang, Fei Gao, Zhenlong Wang, Yangwei Wang. 1404-1407 [doi]
• The control system design of methanol reforming hydrogen based on kingview and PLCBenbo Zhao, Wenchao Mai, Fuyu Sun. 1408-1412 [doi]
• The influence of ozone on the property of envelop materials of near space vehicleGuochang Lin, Huifeng Tan. 1413-1416 [doi]
• Fully atomistic molecular dynamics simulations of the mechanism of the drag reduction agentGuoping Li, Ziqi Jia, Zhengfang Wang, Xiaodong Dai, Zhiheng Zhang. 1417-1420 [doi]
• Research on the milling tool monitoring system based on wavelet neural networkGuizhong Guo, Xinhua Mao. 1421-1423 [doi]
• Research on the failure process and mechanism of soil slope in seasonal frozen regions based on numerical simulationQi Ge, He Wu, Ya-feng Gong, Jia-ping Zhang. 1424-1427 [doi]
• A dynamic design method based on system reverse load for CDMA EV-DO RevA QosFeng Zhan, Xiaotang Li. 1428-1430 [doi]
• Tribology of poly(vinyl alcohol)-carbon nanotube compositesXuefeng Li, Shaoxian Peng. 1431-1434 [doi]
• Investigation on some key issues of regenerative damper with rotary motor for automobile suspensionSongshan Liu, Hao Wei, Weihua Wang. 1435-1439 [doi]
• A chip temperature-controlled technology based on the integrated-circuit CA3046Gang Gou, Jianping Song. 1440-1442 [doi]
• Stochastic Entropy Fuzzy Comprehensive Evaluation method of financial scientific and technology investmentDong Shao, Lei Zhou. 1443-1446 [doi]
• Abstract interpretation-based formal description of data obfuscationYing Zeng, Fenlin Liu. 1447-1450 [doi]
• Optimal repair resource assignment strategy for partial failed systemsZhengjun Wang. 1451-1454 [doi]
• Design of hollow-core photonic band-gap fibers for CH4 and C2H2 optical fiber sensorsQiu-guo Wang, Jin-Long Zhang, Lei Zhang, Li-jia Chen, Wei Gao. 1455-1457 [doi]
• Decoupling control of PMSM based on exact linearizationJun Zhang, Zhaojun Meng, Rui Chen, Changzhi Sun, Yuejun An. 1458-1461 [doi]
• The modeling method of curved surface based on ACISWensheng Xu, Jun Ma, Hongyan Chu, Hongtao Wu. 1462-1465 [doi]
• A resource integration platform for manufacturing grid based on SOOALingjun Kong, Wensheng Xu, Jianzhong Cha, Jiaqing Yu, Nan Li. 1466-1469 [doi]
• Research of network storage system based on erasure codeKechao Wang, Zongfu Jia, Ming Kui Zong, Jingwei Yu. 1470-1474 [doi]
• Research on grinding spindle frequency distributed control systemYue Feng, Yang Zhao. 1475-1477 [doi]
• A lossless acoustic logging while drill compression scheme based on differential predictionYujie Liu, Yunkai Zhou, Hongbing Xiao. 1478-1481 [doi]
• Nonlinear perturbation solution of Duffing equation and the application in control systemLina Jiang. 1482-1485 [doi]
• Analysis of environmental effects of deep groundwater exploitation in east-central plains of Hebei provinceShelong Kang. 1486-1490 [doi]
• Impacts of human activities and climatic change on water resource in Hebei provinceShelong Kang. 1491-1494 [doi]
• Phase rotation Maximum Transmit Diversity codeChuan-lian Ma. 1495-1498 [doi]
• A cascaded multilevel class-D power amplifier output harmonicMing Dong Ling Cai, Qingde Meng, SunLin Yang. 1499-1502 [doi]
• Anticorona materials and structure for stator coils of high voltage generatorsQiang Fu, Chunlian Lu, Yuguang Man, Qiuhan Zhang, Wei Zheng, Chengwei Huang, Bing Xu, Zhenghai Li. 1503-1506 [doi]
• Synthesis, characterization and cataluminescence properties of three aerogelsGuohong Liu, Rongjun Tang, Chuanzhi Chen, Peng Peng. 1507-1510 [doi]
• A quick target recognition technologyMingyu Xia, Donghua Cui, Junhui Wei, Zhen Liu. 1511-1514 [doi]
• The research on multi-target matchingGuiyan Pei, Donghua Cui, Junjie Li, Mingyu Xia. 1515-1518 [doi]
• Structure similarity image quality assessment based on visual perceptionHongsheng Yu, Xiusheng Liu. 1519-1522 [doi]
• Study on the preparation, characterization and antibacterial activity of complex for gadolinium iodide with thioureaWeiping Jiang, Peng Peng, Yuzhao Liu, Xingang Wang, Xin Wang. 1523-1526 [doi]
• Double-fuzzification fuzzy control and its application in process controlTianli Li, Gang Xu, Licun Fang, Kemin Zhu. 1527-1529 [doi]
• Inter-cluster route algorithm based on the gateway for wireless sensor networksLi Peng, Jianbo Xu, Wei Liang. 1530-1533 [doi]
• Application of gray correlative model for surface quality evaluation of strip steel based on the variation coefficient methodDewei Dong, Yunhui Yan, Zhan Wang. 1534-1537 [doi]
• An improved parallel banker's algorithm based on Petri netXiaohui Ma, Junya Yan. 1538-1541 [doi]
• State recognition system of mechanical equipment based on the VS theory and HSMMQiang Huang, Qiuping Huang, Jun Li. 1542-1544 [doi]
• Research on mine laneway 3D modelingKaiyun Lv, Shilin Zou. 1545-1548 [doi]
• A time synchronization mechanism for real-time EPONJun-suo Qu. 1549-1551 [doi]
• Algorithm designed for image inpainting based on decomposition and fractalZongwen Bai, Weihu Zhang, Meili Zhou, Jie Bai. 1552-1555 [doi]
• Research on micro-electro-mechanical system computer aided designXiaoyu Wang, Linghui Yu, Song Xie. 1556-1559 [doi]
• Reasearch of Wood Plastic Composites application based on Fused Deposition Modeling technologyZhao Hui, Zhu Hong Yuan, Zhou Yi Long, Wang Qing Wen. 1560-1562 [doi]
• Simulation analysis of integration shear weighing plate based on ANSYSXintong Zhao, Chengjun Jin, Jianyu Li, Xiaodong Lu. 1563-1566 [doi]
• Theoretical research on bending deflection of ram in DVT250 numerical control double-column latheDefan Zhou, Xiaodong Yu, Xiuli Meng, Chunli Gao, Zhixin Qiu, Hongjun Xiang, Changqing Yang, Yinfeng Liu, Shuyan Zhao, Yan Ni, Wenwu Guo. 1567-1570 [doi]
• Research on reliability and maintainability of mechanical equipmentJunshan Si, Xianjiang Shi, Xiaodong Yu, Chong Li, Hong Shi. 1571-1573 [doi]
• Numerical simulation of the static interference fit for the spindle and chuck of high speed horizontal latheXiaodong Yu, Xiuli Meng, Defan Zhou, Yonghai Li, Bo Wu, Chunli Gao, Yanqin Zhang, Junfeng Wang, Xianzhu Sun, Yan Ni, Shuyan Zhao, Hui Jiang, Weiming Nie, Changqing Yang. 1574-1577 [doi]
• Structural design and testing study of truck mufflerShi Wu, Dongkai Jia, Yuntong Jia, Ke Wu. 1578-1581 [doi]
• The research of the accuracy with gear measuring center based on finite element analysisYongjun Zhang, Yang Li, Qingjian Dong. 1582-1585 [doi]
• Structural analysis and optimization on crossbeam of heavy NC gantry moving boring & milling machineGuihua Han, Bingwei Gao, Junpeng Shao, Di Wu, Xiaodong Yu, Zhimin Shi. 1586-1589 [doi]
• Grey relation analysis on fuzzy fault tree of disk brakeDezhong Ma, Yongqing Jang, Zhen Zhou, Tonghui Zhao, Dawei Lin. 1590-1594 [doi]
• Wavefront aberration correction using circulation feedback control based on image boundary definitionHong-xin Zhang, Jian Zhang, Li-ying Wu, Dong Wang. 1595-1598 [doi]
• Performance analysis of seasonal soil heat storage air conditioning system in solar ground coupled heat pumpFang Wang, Zhilong Liu, Zhongjian Li, Yuejun Liu, Zuomin Wang, Maoyu Zheng. 1599-1602 [doi]
• Development of automatic control system for supplying cold water based on PLC and configuration softwarePeng Wang, Dongbin Li, Shan Cong, Chao Liang. 1603-1606 [doi]
• Finite element analysis of temperature field on capillary rheometerTiequn Duan, Qingjian Dong, Zhenqi Yang, Yang Li. 1607-1610 [doi]
• Parameter optimization of cutting process based on MATLABZhenbo Wang, Hongshan Yuan, Xinyan Liu, Zhenning Zhao. 1611-1614 [doi]
• Predicting residual stress characteristics based on BP artificial neural network in precision hard turningTao Chen, Mingjun Zhang, Xianli Liu, Yuhui Shen. 1615-1618 [doi]
• Grinding engineering ceramics researchLi Xu, Shubo Liu. 1619-1622 [doi]
• Design and simulation of high-pressure capillary rheometerTiequn Duan, Lei Xu, Zhenqi Yang. 1623-1626 [doi]
• Interpolation algorithm and simulation on automatic saddle-shaped welding machine of heavy pressure vesselsTiequn Duan, Da Zhang, Zhenqi Yang, Dan Yu. 1627-1630 [doi]
• Research on groove optimization for milling insert based on finite element analysisYaonan Cheng, Liquan Wang, Zhengjia Li, Jun Gao, Caixu Yue, Yuhui Shen. 1631-1634 [doi]
• Tool path planning in finish-milling process for integrally-shrouded impeller channels with ringsJuntao Jing, Hong Zhao, Yunfeng Liu, Xuanqi Li, Zhonglu Liu. 1635-1638 [doi]
• Development of automatic control system for finishing of precise flat steelDongbin Li, Peng Wang, Chao Liang, Shan Cong, Ying Li, Ting Chen. 1639-1642 [doi]
• Analysis on displacement and stress of a new wind power generator statorDonghua Li, Xibin Wei, Xinwei Zhou. 1643-1645 [doi]
• Structure dynamics analysis of multistage submarine missile shellXibin Wei, Donghua Li, Cong Wang, Xing Liu. 1646-1649 [doi]
• Finite element analysis of superplastic blow forming of fine-grained magnesium alloy sheetYandong Yu, Peng Jiang, Yuan Zhuang, Huiyan Ning. 1650-1653 [doi]
• Finite element simulation of SPF/DB process for ZK60 magnesium alloy corrugated partYandong Yu, Chao Li, Juan Feng. 1654-1657 [doi]
• Research on the key technique of continuous rotary electro-hydraulic servo motorXiaojing Wang, Jianying Li, Junpeng Shao. 1658-1661 [doi]
• Study of macromolecular compound anstatic agentMing Xu. 1662-1665 [doi]
• Dynamic modelling of wheeled planetary roversFeng Chen, Giancarlo Genta, Guang Zhao. 1667-1671 [doi]
• Dynamic simulations of API000 nuclear main pump rotor systemGuang Zhao, Jian Yu, Fu Tian, Yan Liu, Xingang Guo, Yanfeng Duan. 1672-1674 [doi]
• Numerical study of francis turbine flow field under small opening conditionYang Yao, Hongjie Wang, Ruzhi Gong, Xianzhu Wei, Wanjiang Liu. 1675-1678 [doi]
• Analyses of impedance matching for piezoelectric energy harvester with a resistive circuitHongyan Wang, Xiaobiao Shan, Tao Xie, Muwen Fang. 1679-1683 [doi]
• Instrument reach for peeping at the bore of deep pipeWangkai, Xiangdong Mao, Jie Du. 1684-1686 [doi]
• Design of video system for detecting the bottom of deep pipeChunting Ma, Liqing Fang, Jiuhe Ma, Jie Du. 1687-1689 [doi]
• Design of straightness tester for deep pipeXiaobo Lu, Xiangdong Mao, Jie Du. 1690-1692 [doi]
• The effects of fibers on the electrical contactsYilin Zhou, Hongda Liu, Wenchao Lv. 1693-1697 [doi]
• A new kind of effective of algorithms for solving the option pricing model with transaction costsXiaozhong Yang, Lifei Wu. 1698-1701 [doi]
• Study statistical properties of Raman Cross-talk with walkoff in fiber communication systemsYu Liu, Yanyan Zhao, Xinshe Zhang. 1702-1704 [doi]
• Application of credal network on evaluating emergency capacityZonggeng Zhao, Dingshi Sun, Yanan Wang. 1705-1707 [doi]
• Research on sound intensity probe whose frequency band can be adjustedXiaolan Zhao, Huailin Ruan, Jiren Xu, Jiasong Cheng, Jihai Niu. 1708-1711 [doi]
• Design of frame structure and MAC protocol for real-time EPONJun-suo Qu. 1712-1714 [doi]
• An FPGA-based distributed IP watermarking methodJing Long, Jianbo Xu, Wei Liang. 1715-1717 [doi]
• Design of VME bus interface board based on FPGA for converter controlHongchi Liu, Shutian Zhang, Xiaoxin Wang. 1718-1722 [doi]
• Design and realization of video streaming real-time transmission system based on IPTV terminalQiu-Yun Zheng, Tao Li. 1723-1726 [doi]
• Structural design and damping characteristics modeling of new recycling vibrational energy hydraulic vibration damperZhi-hua Ding, Qiang Huang, Dai Hong-mei. 1727-1730 [doi]
• Chinese semantic parsing based on dependency graph and feature structureBo Chen, Donghong Ji. 1731-1734 [doi]
• Analysis of thermal stability of center of mass of gas-floated gyroscopeJingshi Liu, Lihua Lu, Yazhou Sun, Jiaxuan Chen, Yingchun Liang, Lei Huang. 1735-1738 [doi]
• Study of a scenic spot monitoring system based on RFID and multi-sensor information fusion technologyYongqiang Zhang, Yukun Liu, Hongbin Gao. 1739-1742 [doi]
• The present situation and application of BiosensorWeiping Jiang, Xingang Wang, Zhongping Yang, Peng Peng, Yuan Lu, Hongchun Ren. 1743-1746 [doi]
• First principle investigation of CrSi2 with doping VWanjun Yan, Shiyun Zhou, Quan Xie, Chunhong Zhang, Zhongzheng Zhang. 1747-1749 [doi]
• Calculations of amounts of joint reserve of talents in human resources systemsZhe Yin, Yunfei Guo, Maosheng Lai. 1750-1753 [doi]
• Novel method for processing of the pressure waveform based on Wavelet analysisQizhi Huang, Tianshi Han, Kai Yin. 1754-1756 [doi]
• Mechanism configuration design of multi-legged walking robots based on hand-foot-integrated functionLiangwen Wang, Xinjie Wang, Xuedong Chen, Xiaohui Zhang, Weigang Tang, Duanqin Zhang. 1757-1761 [doi]
• Control system design for multi-legged robot with hand-fused footXinjie Wang, Xianqun Zeng, Yuxiao Zhang, Liangwen Wang, Bo Wei. 1762-1764 [doi]
• Research on optimization of transportation-loadingKai Yin, Qizhi Huang, Huijun Yang. 1765-1768 [doi]
• Modal analysis of a type of square baler's frameworkXue-Wei Bai, Ping Zhao, Yongkui Li, Juan Liu. 1769-1772 [doi]
• Determination of five flavonoids in honeys by HPLC-ESI-MS/MSXiao-li Hao, Fang Chen, Ying-bo Zhao, Hong-zhe Tian. 1773-1776 [doi]
• An approach to scheduling of flexible manufacturing systemLiangwen Liu, Jianxiong Ye. 1777-1779 [doi]
• Coupling process of sphalerite concentrate leaching in FeCl3-HCl and tetrachloroethylene extracting of sulfurPeng Peng, Chuanzhi Chen, Shanmao Li, Weiping Jiang, Guohong Liu, Xin Wang. 1780-1783 [doi]
• An experimental project dedicated to pumping efficiency optimization by choosing specific cylindrical lens based on green optical-contact laserXiao-hong Xu, Li-Ping Jia, Xiang-xia Li, Jun-jian Kang. 1784-1786 [doi]
• Position controller based on state observer for 6-DOF parallel teleoperation manipulatorMingde Gong, Qiusheng Chang. 1787-1790 [doi]
• Design electronic control unit of blend brake system for heavy vehicleTianxu Wang, Mingde Gong. 1791-1794 [doi]
• Design on a unipolar and unidirectional stepper motor circuitBenhua Zhang, Chenghua Li, Shiming Sun, Lu Gan. 1795-1797 [doi]
• Developed and test study on the subsoilerFengqin Zhao, Yandeng Guo, Shipeng Lai. 1798-1801 [doi]
• Dynamic testing for the seed tape tensions of the rice seed tape twisting machineHongguang Cui, Wentao Ren, Fuling Zhang. 1802-1805 [doi]
• Optimization and simulation of crank-rocker mechanism based on ExcelLi-jun Chen, Xue-Wei Bai, Jun-ling Wang. 1806-1809 [doi]
• Study on Shanghai stock market with ACD model based on MCMCYanan Wang, Qizong Wu, Chunsheng Cui. 1810-1813 [doi]
• Analysis of GEO intersatellite laser time transfer and link performanceFeijiang Huang, Xiaochun Lu, Jun Yang, Qingxiao Shan, Jianyun Chen, Yongbin Zhou. 1814-1817 [doi]
• Effect of burying the straw deeply and plastic mulching on soil water and yield of spring-sown maizeRuili Wang, Yulong Zhang, Yi Huang, Fenglan Wei, Xuewei Bai, E. Liu. 1818-1820 [doi]
• Study on dynamic response of the experiment to potted crop's water consumption detection systemCuihong Liu, Wentao Ren, Junming Hou, Benhua Zhang, Ling Tong. 1821-1824 [doi]
• The application of soil temperature measurement by LM35 temperature sensorsCuihong Liu, Wentao Ren, Benhua Zhang, Changyi Lv. 1825-1828 [doi]
• Preparation of titanium oxides films by CVD in O2-N2 atmosphereLiping Sun, Rong Deng, Yuan Yuan, Huiqiu Deng. 1829-1831 [doi]
• 3D Model retrieval technology based on 3D reconstructionJiawei Zhang, Yunxia Liu. 1832-1835 [doi]
• The present situation and development of machinery's integrationXingang Wang, Zhongping Yang, Weiping Jiang, Peng Peng, Hongchun Ren, Yuzhao Liu, Yuan Lu, Ruizhong Zhuang. 1836-1839 [doi]
• An optimization control method of waste incinerator for power generationPingli Wu, Guoguang Gao. 1840-1844 [doi]
• Research on ECS control scheme of waste incineration based power plantPingli Wu, Guoguang Gao. 1845-1848 [doi]
• Application of equipment maintenance vehicles based on entropy multi-objective decisionJiansheng Hao, Qizhi Huang, Shudong Li. 1849-1851 [doi]
• Artificial emotional interaction model based on EFSMQing-mei Meng, Ai-lian Chen. 1852-1855 [doi]
• Optimization of the control strategy for EHA-VPVM systemYongling Fu, Bin Yang, Haitao Qi, Ye Zhang. 1856-1859 [doi]
• Analysis on generating mechanism and capacity calculation of reactive power compensation in 220kV substationKuihua Wu, Jian Wang, Xinsheng Niu, Kuizhong Wu. 1860-1863 [doi]
• A circular bend mode piezoelectric micro-droplet ejection generator for spatial lubricationMingwei Sheng, Weishan Chen, Junkao Liu, Shengjun Shi. 1864-1867 [doi]
• Qt programming to realize teaching simulation demonstration of exploration seismologyQunhao Jin, Zichao Yan, Xuewang Liu, Shuchao Ma, Taiyu Guo, Siyou Tong. 1868-1871 [doi]
• A SCM experiment of engine assembly by WITNESS simulatingLing Pei, Jingkui Ruan, Feng Li, Qing Lu, Haisheng Wang, Longzhou Zhang. 1872-1875 [doi]
• Simulation of the self-sensing actuators based on multi-piezoelectric effects of piezoelectric crystalLijing Wang, Liping Shi. 1876-1879 [doi]
• The pricing model construction of reverse supply chain based on game theoryXiangyan Zhang, Chunhua Jin. 1880-1883 [doi]
• Semantic segmentation using regions in natural scenesShilin Wu, Feng Zhu, Yingming Hao. 1884-1887 [doi]
• ADR algorithm applied in electro-hydraulic servo systemManlin Long, Guanghua Li, Shuangqiao Chen, Yongling Fu. 1888-1891 [doi]
• A new method for the analysis of temperature-dependent resistances and inductances of multiconductor cableXiuhua Men, Yuzhen Ma, Haiyan Shao. 1892-1896 [doi]
• Research on Bi-directional converter for lithium battery energy storage systemJuan Hu, Jianlin Li, Dong Hui. 1897-1900 [doi]
• Design of thermostat system based on Proteus simulation softwareZhenwei Han, Kefei Song. 1901-1904 [doi]
• Net utility maximization based scheduling modelHaijun Zhu, Yanan Song, Qian Zhong, Tao Zhang, Xigui Hu. 1905-1908 [doi]
• Research on RFID-based monitoring platform for wireless sensor networksYelin Hu, Xiaowang Guo, Jianyong Zhu. 1909-1912 [doi]
• Rsearch of development in wireless sensor network routing protocols based on NS2Baiping Li, Xiaoqin Zhang. 1913-1916 [doi]
• Palmprint recognition using Gabor feature-based two-directional two-dimensional linear discriminant analysisZhiqiang Zeng, Pingping Huang. 1917-1921 [doi]
• Embedded based radar image acquisition and compressionShaowei Li, Xinqing Zhuang. 1922-1926 [doi]
• The path algorithm coal mine's emergency rescueYukun Wang, Bibo Lu. 1927-1931 [doi]
• The comprehensive ranking evaluation of flood disaster based on grey-cloud whitening-weight functionYue Chen. 1932-1934 [doi]
• Identifying the mechanism of toxic action of selected compounds by artificial neural networksLi Zhang, Yulong Lou. 1935-1938 [doi]
• Power system simulation platform based on CORBA technologyXiaohua Lai, Jiangyuan Le. 1939-1941 [doi]
• Research of task decomposition based on multi-agent cooperationChunfeng Jiang, Yulan Zhao. 1942-1944 [doi]
• Research and development of intelligent decision system for highway maintenance based on GISHui Zhang, Zhihui Feng, Rui Gao. 1945-1948 [doi]
• Analysis of voltage source control characteristics of clearance control magnetic dynamic absorberBo Song, HuiMin Feng, Chuanguang Ding. 1949-1953 [doi]
• Current status of grafting robot for vegetableSubo Tian, Donglei Xu. 1954-1957 [doi]
• The technology of normalized digital orthogonal detection and its applicationShu-qin Sun, Zhe Zhang, Jim Lin, Ying-ji Wang. 1958-1963 [doi]
• Frequency equation of axisymmetric guided waves in logsHuimin Yang, Lihai Wang, Li Li. 1964-1967 [doi]
• Performance monitoring and acquisition system design of gasoline engines based on oxygen enriched combustionBingyuan Han, Jiangwei Chu. 1968-1973 [doi]
• The torque measurement method and characteristics analysis based on magneto-elasticityShaoyan Li, Jiangwei Chu, Bingyuan Han, Yan Wang, Xinyue Li. 1974-1977 [doi]
• The simulation analysis of the centroid offset effects on braking performanceBing Li, Jiangwei Chu. 1978-1981 [doi]
• The research of the technology of controlling skin pass mill elongation rateZhiqiang Duan, Xiangyin Feng, Jizheng Han, Caihua Fei. 1982-1985 [doi]
• Evaluation on agricultural relative efficiency in different areas of ChinaFutian Sun, Dandan Sun. 1986-1990 [doi]
• Background segmentation of corn seedling stage base on the greenness methodYue Xu, Zenghui Wang, Dongyan Wang. 1991-1994 [doi]
• Wear analysis of UHMWPE acetabular cup in standard gaitBao-Quan Zhu, Wen-jie Zhai. 1995-1998 [doi]
• Electrohydraulic servo control of vehicle yaw rate angular velocityXuemei Qin, Yehai Lin, Baoshan Shi. 1999-2003 [doi]
• Analysis of heavy trucks' effect on freeway traffic safetyYingwei Ren, Shourong Wu. 2004-2007 [doi]
• The theatrical calculating formulas of BFT type flexible driving with multichannel engagingYuancheng He, Zhen Hong, Lin Yuan, Songtao Wu, Ziqiu Zheng. 2008-2014 [doi]
• Designed on full-closed loop control system of gear measuring centerHaiyan Chen, Yue Ma. 2015-2018 [doi]
• The research of fuzzy self-tuning PID in Chinese traditional herbal harvester with gripping-belt speedJinXia Huang, Junfa Wang. 2019-2024 [doi]
• Analysis and design for bilinear discrete systems subject to input saturationMao Wang, Yongheng Yue, Ming Yan. 2025-2028 [doi]
• A method to judge taper-taper intersectionJunjie Li, Luwei Xu, Guiyan Pei. 2029-2032 [doi]
• Effect of content on dielectric performance of Barium titanate/polyimide filmsMinghua Chen, Jinghua Yin, Yu Feng, Xiaoxu Liu, Guang Li. 2033-2036 [doi]
• Effect of content on dielectric performance of polyimide / TiO2 hybrid filmsXiaoxu Liu, Jinghua Yin, Minghua Chen, Yu Feng, Guang Li. 2037-2039 [doi]
• A new estimation method of the forestry inventory parameter based on three-dimension laser scan technologyLifu Zhang, Dongfang Lu. 2040-2043 [doi]
• The onset of convection in a viscoelastic nanofluid layerLong-Jye Sheu, Wei-Tai Weng, Horng-Shing Chiou, Shah-Rong Lee. 2044-2047 [doi]
• Study on application of 3D laser scanning technology in estimation of the standing tree parameterLifu Zhang, Dongfang Lu, Liwen Cao. 2048-2051 [doi]
• Review on integrated health management for aerospace planeYi-Bo Li, Jin-Ying Liu. 2052-2055 [doi]
• Gait identification method based on closed area feature of lower limbsSenyue Zhang, Shanshan Bei, Yibo Li, Xiaoling Shen. 2056-2059 [doi]
• Bias analysis on return signal simulator of radar altimeterChuan-dong Xu, Xi-Yu Xu, Shuangbao Yang. 2060-2064 [doi]
• An indoor airship autopilot design schemeYibo Li, Cheng Qiang Liu. 2065-2068 [doi]
• Comparative analysis on a vehicle's speed control systems stabilty based on fuzz rules and PID methodNing Han, Yuguang Han, Chunhui Wang. 2069-2072 [doi]
• A predicted tire model for combined tire cornering and braking shear forces based on the slip directionNan Xu, Dang Lu, Shenhai Ran. 2073-2080 [doi]
• Surface shape optimization for the space membrane reflectorPeng Zhang, Guang Jin, Xing Zhong, Yuan Zhang, Ying-Chun Qi, Peng Jie. 2081-2084 [doi]
• Study on supper resolution reconstruction based on staggered arraysZhang Yuan, Zhong Xing, Jin Guang. 2085-2088 [doi]
• The layout and fatigue life analysis of welding spots for the cab body in white of a commercial vehicleAn Cuf, Zihui Liu, Qingyang Zeng, Qiang Yang 0005. 2089-2093 [doi]
• Theoretical research and simulation of series compensation technology of distribution lineYanjie Ren, Zailin Piao. 2094-2097 [doi]
• Mechanization of deep tillage and mulching to improve soil water content and spring maize yieldRuili Wang, Yulong Zhang, Yi Huang, Fenglan Wei, Xuewei Bai, E. Liu. 2098-2101 [doi]
• The mathematical model and simulation of spatial profile curve for stair handrail elbowGuanglan Xia, Yan Ma, Xiaoping Hu 0006, Feng Yu, Ping Feng. 2102-2105 [doi]
• Experimental investigation of vibration and transmitted power for vehicle rear axle noise researchNiancheng Guo, Wenku Shi, Guangming Wu, Wei Liu, Chunguang Hao. 2106-2108 [doi]
• Finite element modal analysis and test modal analysis of the control cabGuangming Wu, Wenku Shi, Zhiyong Chen, Jianghua Fu, Niancheng Guo, Suojun Hou. 2109-2111 [doi]
• Optimization of powerplant mounting system and software developmentYuchen Zang, Wenku Shi, Xiang Song. 2112-2115 [doi]
• Application of advnced process control on mixed-product chemical mechanical polishing processChien-Feng Wu, Chcng-Hsicn Chen, Mui-Home Chen, Cheng-Wenc Chen. 2116-2119 [doi]
• Validate fireproof effect of designed structure by temperature field simulation and calculationWensi Liu, Chenhua Zhong, Zhiqing Yang, Xiaojun Zhu 0004. 2120-2123 [doi]
• Analysis of the regenerative brake system parameters for concrete mixing truck basded on AMESimCui Zhang, Xinhui Liu, Zhan Wang, Qiang Shi. 2124-2127 [doi]
• Design of the control system for hydraulic experimental bench based on LabVIEWCui Zhang, XiaoBin Wang, Zhigang Wang. 2128-2130 [doi]
• Design and implementation of dynamic virtual networkJiqiang Zhai, Keqi Wang. 2131-2134 [doi]
• A novel algorithm of maneuvering target tracking based on AIMM-CKFSiqing Tian, Liang Chen, Junwei Yang, Jinghui Hao. 2135-2138 [doi]
• Effect of parallel compensation on series compensation in long distance distribution lineYanjie Ren, Zailin Piao. 2139-2142 [doi]
• Soft sensor of vehicle state based on UKF and vehicle dynamicsZhenhai Gao, Tao Wu. 2143-2147 [doi]
• 3G Technology in the engineering disciplines of higher vocational educationZhigang Wang, Cui Zhang, ChunHong Wu. 2148-2151 [doi]
• Buiding model and dynamic characteristic analysis for magnetorheological fluid engine mountSuojun Hou, Wenku Shi, Shaohua Wang, Xuejing Wang. 2152-2154 [doi]
• Modeling and control of automotive antilock brake systems through PI and neural network arithmeticJian Zhao, Litong Guo, Bing Zhu, Wenjie Duan. 2155-2158 [doi]
• Temperature field reconstruction using artificial neural networkRan Yan, Yu Ma, Heping Tan, Jing Ma. 2159-2163 [doi]
• Design and realization of DICOM/HL7 gateway in PACSLidong Yang, Yu Gu 0010. 2164-2167 [doi]
• Study on CMOS operational transductance amplifiersHuaizhou Li, Xiaolin Zhang 0002, Yue Wang. 2168-2171 [doi]
• The study of the fixation for femoral neck fracture based on finite element methodMonan Wang, Hongshu Guo, Zhang Meng. 2172-2174 [doi]
• Design and research of simulated surgical instruments for medical training systemMonan Wang, Xiang Chi, Hongjing Wang. 2175-2178 [doi]
• Optimal operation of panel furniture reconfigurable manufacturing system based on TCPN and GAYuerong Zhao. 2179-2182 [doi]
• Research on mistake proofing technology for airbag flexible assembly line based on barcode and databaseChao Shi, Fangtao Li, Yubin Zhou, Han Sun. 2183-2186 [doi]
• Design of a high precision bandgap voltage referenceLinhai Cui. 2187-2190 [doi]
• Research on stress load of joints in handling the work based on ergonomicsYaojun Shi, Naiqun Wu. 2191-2193 [doi]
• Research on the digitized models of automobile hubs based on computer simulationNaiqun Wu, Yaojun Shi. 2194-2196 [doi]
• Molecular dynamics simulation effect of temperature on binding energies of polyimide-nano a-Al2O3Jin-Shuo Mei, Chang Shu 0006, Jing-Hua Yin. 2197-2199 [doi]
• Numerical simulation on effect of water depth to the hydrodynamic characteristics of the cylinder out of the tubeHaijun Liu, Xibin Wei, Xing-zhi Peng, Ben-li Wang. 2200-2203 [doi]
• Predicting breast cancer survivability using random forest and multivariate adaptive regression splinesDengju Yao, Jing Yang, Xiaojuan Zhan. 2204-2207 [doi]
• The design of cable-climbing robotGuangping Hao, Fanzhu Meng, Hongzhe Li, Zhihong Wang, Zhaonan Zhong. 2208-2211 [doi]
• Speech synthesis based on AMR-WB algorithmChang Shu 0006, Jin-Shuo Mei, Jing-Hua Yin. 2212-2214 [doi]
• The program design for the network security authentication based on the USB Key technologyJin-wei Yu. 2215-2218 [doi]
• Surface fitting compensation research of diffusible silicon pressure transducerMingru Zeng, Liang Liu, Xin Qian, Wentang You. 2219-2221 [doi]
• Energy saving mechanism based on double-way polling DBA algorithm and ONU sleep mode for EPONZhen Wang, Wenchang Yu, Liqian Wang. 2222-2225 [doi]
• A novel marine engine room monitoring and alarm system integrated simulationHuibing Gan, Guang Ren, Jundong Zhang. 2226-2229 [doi]
• Research for hybrid genetic algorithms on optimization of cutting linear stockGuang Dong, Guang Cai Cui. 2230-2233 [doi]
• Characteristic analysis and sample modeling of cave depot targetXiao Luo, Hui Zhang, Qingsheng Luo, Cai Gao. 2234-2237 [doi]
• Reliability calculation based on sensitivity analysisWenhui Mo. 2238-2241 [doi]
• A system of refractive index detection based on microinterferometric backscatterWenjun Ma, Yingchun Ding. 2242-2245 [doi]
• Research on intelligent frequency conversion control system of pumping unit with auto-adapted functionXiangqian Xu, Haobin Zhou, Mao Li. 2246-2248 [doi]
• Study on the design and experiment of a magnetic controlled wireless capsule endoscopyQiliang Wang, Jianqing Liu, Ping Huang. 2249-2251 [doi]
• Wireless charger prototype based on strong coupled magnetic resonanceYanping Yao, Hongyan Zhang, Zheng Geng. 2252-2254 [doi]
• The application of FPGA-based reconfigurable computing technology in Digital Light Processing systemsGang Han, Zheng Geng. 2255-2258 [doi]
• A improved virtual circuit switching technology based on concurrent processing modeJuan Xu, Xuesong Zhu. 2259-2262 [doi]
• Research on boundary extraction and fitting analysis for convective clouds based on rerouting strategyHui Li, Xiaohao Xu, Xinglong Wang. 2263-2266 [doi]
• The research of temperature compensation technology of high-temperature pressure sensorCui Chun Sheng, Ma Tie Hua. 2267-2270 [doi]
• Research on flexible honeycomb structure design for morphing aircraftHaifeng Peng, Erbao Dong, Shiwu Zhang, Jie Yang 0004. 2271-2274 [doi]
• Target tracking algorithm based on improved Gaussian mixture particle filterYunbo Kong, Xinxi Feng, Chuanguo Lu. 2275-2278 [doi]
• Strength analysis for pre-stressed bolted joints of turntable bearingsWeiwei Xu, Hongbin Liu, Yujun Xue, Jishun Li. 2279-2282 [doi]
• Research and design of an emergency command system based on mobile devicesBo Yin, Yonglei Xing, Lei Wang, Zhiqiang Wei. 2283-2286 [doi]
• A conceptual model for preventing web bypass vulnerabilitiesZhiqiang Wei, Kaiyuan Shi, Dongning Jia. 2287-2290 [doi]
• A kind of license plate location based on mathematical morphology and edge detectionHongping Hu, Yanping Bai. 2291-2294 [doi]
• An efficient algorithm for Chinese license plate locationRong Cheng, Yanping Bai. 2295-2297 [doi]
• Analysis and design of energy-oriented security protocols for Wireless Sensor NetworksXiaowang Guo, Jianyong Zhu. 2298-2301 [doi]
• Research on brake disk modal characteristic of disk brakeLiya Yao. 2302-2305 [doi]
• Application information flow non-interference transmission modelLei Gong, Lu Tian, Fulian Zhang. 2306-2309 [doi]
• A DRM system for mobile digital journals based on OMA DRM modelLiang Wang, Chen Wang. 2310-2313 [doi]
• An improved DRM authentication approach for mobile journals publishingLiang Wang, Chen Wang. 2314-2317 [doi]
• Virtual link-lengths approximating method for forward kinematics of multiple motion-coupled linkage mechanismHengHui Sun, Minzhou Luo, Wei Lu, Xiang Dong. 2318-2323 [doi]
• Design of wireless drive and control system for capsule micro-robotJizhong Liu, Baolei Wang, Liangbo Li, Hua Zhang. 2324-2327 [doi]
• Electrochemical corrosion behavior of HRB500 steel bar in Simulated Concrete Pore solutionsBilan Lin, Yuye Xu. 2328-2332 [doi]
• Thermal error modeling of machine tool based on fuzzy c-means cluster analysisJian Han, Liping Wang 0001, Ningbo Cheng, Haitong Wang. 2333-2336 [doi]
• Steering trapezoid mechanism design based on Monte Carlo methodLei Zhang, En'guo Dong, Yanyun Xing. 2337-2339 [doi]
• Passenger recognition system based on body pressure distribution informationEn'guo Dong, Lei Zhang, Zhiwei Guan. 2340-2343 [doi]
• The realization of learning of perceptual modelQing Xue, Wenchao Xu, Yonghong Liu, Changwei Zheng. 2344-2346 [doi]
• Research of top-down automatic assembling design method based on linkageWeidong Wu, Wenhe Liao, Yu Guo. 2347-2350 [doi]
• The design and implementation of a workflow system for enterprise project managementYun Zhang, Yi Chen. 2351-2354 [doi]
• On evolutionary strategy based on hybrid crossover operatorsXiaodong Yu, Jingbo Shao, Hongbin Dong. 2355-2358 [doi]
• A simplified directional curve inference methodXiao-fang Shao. 2359-2361 [doi]
• Modeling and simulation about the double-circular-arc modified cycloid epicyclical gear train based on UGJianing He, Wei Zhang, Rong Tan, Qiang Li, Yong Gao. 2362-2365 [doi]
• Research on the performance optimization of web server by software realization based cluster systemQiujin Zhang, Hongxing Liu. 2366-2368 [doi]
• Observation and analysis of micro pizza defects in organosilicon coatings of industrial manufactureWen-Long Yan, Li Jia, Hai-Ning Cui, Kaj Pischow. 2369-2372 [doi]
• Clamping device based on lever-two-step orthogonal toggle force-amplifying mechanism driven by pneumatic musclePeiliang Qin, Kangmin Zhong. 2373-2376 [doi]
• An approach to identify magnettizing inrush currents and its simulationYang Long. 2377-2380 [doi]
• A rate control scheme for three-dimensional wavelet-based video codersLiZhi Zhang, Tao Wang, Huadong Sun, Long Yang, Jinzhao Ma, Lei Zhou. 2381-2384 [doi]
• Attribute reduction algorithm of rough set fused with ant colony algorithmQing Xue, Tao Hu, Bowei Cao. 2385-2387 [doi]
• The investigation on the selection of measuring distance of acoustical holographyDesen Yang, Xiaoxia Guo, Shengguo Shi, Jianan Ma. 2388-2391 [doi]
• Extraction and analysis of high-speed wires finishing mill group rolling bearings weak breakdown signalJialian Shi, Leigang Liu. 2392-2395 [doi]
• A new 12 DOF biped robot's mechanical design and kinematic analysisFei Sun, He Hua Ju, Ping-yuan Cui. 2396-2400 [doi]
• Research on the accessibility model in transportationLianyuan Cheng, Wenzhi Liu, Gang Zong. 2401-2403 [doi]
• The simulation of harmonic vibration response based on the rigid and flexible boom system of the ttruck-mounted concrete pumpZhi-Jian Gou. 2404-2407 [doi]
• Numerical simulation of the collection efficiency on aircraft ground icingDan-dan Xu, Li-wen Wang, Zhi-wei Xing. 2408-2411 [doi]
• Integrative simulation and analysis of induction motor and control systemMeiyang Zuo, Hui Guo. 2412-2414 [doi]
• Temperature field of the instrument for measuring the yield stress of magnetorheological fluidZuzhi Tian, Youfu Hou, Nannan Wang. 2415-2418 [doi]
• Research of differenced driving behavior modeling and simulationQing Xue, Xiaoming Ren, Changwei Zheng, Yonghong Liu. 2419-2422 [doi]
• Dual-band dual-beam relativistic backward wave oscillator with different inner and outer slow-wave structure periodsYongfu Tang, Lin Meng, Hailong Li, Feng Liu. 2423-2426 [doi]
• On the intelligent detection of insects in stored grainDai Ting, Zhang Miao, Zhang De Xian. 2427-2430 [doi]
• The integrated design of small multi-axis driver based on CANopen protocolGuodong Li, Jianyi Peng, Jijie Su, Chaofeng Zhao, Mengnan Gao. 2431-2434 [doi]
• Numerical simulation and analysis of spectral characteristic for weak fiber Bragg gratingXiaofu Li, Haihu Yu, Hua Huang, Dongsheng Zhang. 2435-2438 [doi]
• Input-output linearization design for dive-plane control of AUVJian Cao, Yumin Su. 2439-2442 [doi]
• Study and design of fine marking and accurate positing for expressway networkLicheng Qu, Dayue Sun, Wei Cao, Peng Li. 2443-2446 [doi]
• Simulation of soil moisture content and its application of peanut field in low hilly area in southern ChinaYuanshu Jing, Xueyuan Li, Alexander Thimm. 2447-2450 [doi]
• A universal model for ruled surface's linear cutting with four-axis linkage machineGuangming Lv, Xiaomeng Sun, Yuyong Tang. 2451-2453 [doi]
• Non-linear compensation algorithm of LOS locating in aerial remote sensorJun Li, Jihong Xiu, Pu Huang, Youyi Li, Li Chen. 2454-2457 [doi]
• Study on the integrity detection and evaluation method of damaged pipelineHua Bai, Bing Chen. 2458-2461 [doi]
• Ponderomotive force of a electromechanical coupling system and its applicationZhi-an Yang. 2462-2465 [doi]
• Study on virtual soldier's behavior modeling in urban battlefield simulationAi-lan Li, Bo-wei Cao. 2466-2469 [doi]
• Model updating applied to an missile structureRonghe Liu, Kaiping Yu, Kai Yang, Wei Liu. 2470-2473 [doi]
• Research on switching losses for induction heating power supply with LLC resonant loadZheng Gao, Yueqing Zhou. 2474-2477 [doi]
• Preparation of titanium nanopowder by induction plasma technologyMinming Zou, Fujun Shang, Wei Huang, Yong Liu, Wenlu Shi. 2478-2481 [doi]
• Effects of intercooling and recuperation on turbofan engine performanceHao Gong, Zhan-xue Wang. 2482-2485 [doi]
• ZnO thin films produced by the RF magnetron sputteringHuawa Yu, Jing Wang, Yangan Yan, Xin Wang, Bin Gao, Hanchen Liu, Yali Du. 2486-2489 [doi]
• Data acquisition technology of link layer filtering under Linux environmentXiaoyu Ma, Feiyan Chen. 2490-2492 [doi]
• The algorithm of creating cloud in skyLin Gong, Dingjun Hu. 2493-2496 [doi]
• Simulation and research on mechanism-hydraulics system of working device of HT-25J wheel loaderLei Du, Weifeng Peng, Jian Huang. 2497-2500 [doi]
• A research on influences of wind and solar power generation system on the grid and the control strategiesGaowa, Wuyun. 2501-2504 [doi]
• Study on 2-dimensional microphone circular array speech enhancement algorithm based on the DOAXiaoyu Ma, Kun Mu. 2505-2508 [doi]
• Access control method based on multi-level security tag for distributed database systemYing-Guang Sun. 2509-2512 [doi]
• The system development of FMS monitoring and fault diagnosisQianliang Chen. 2513-2516 [doi]
• Design of vineyard production monitoring system based on wireless sensor networksXiang Sun, Baoguo Wu, Huarui Wu, Huaji Zhu, Yan Liu. 2517-2520 [doi]
• Design of carving machine controller based on MCX314Gang Zhou. 2521-2523 [doi]
• Study of sensing properties of quartz fiber Bragg grating sensor based on metalized encapsulationXiaofu Li, Haihu Yu, Yuanyuan Jiang, Dongsheng Zhang. 2524-2527 [doi]
• Damping force of MR damper analysis and experimentalZhen Yang, Hui Wang, Xiaoming Han, Wei Fang. 2528-2531 [doi]
• Finite element analysis of X-cor sandwich's compressive modulusXudan Dang, Xinli Wang, Meng Wei, Jun Xiao. 2532-2535 [doi]
• Design and mechanics simulation for shell parts of fiber compositesShengxue Qin, Jidong Hao, Lixin Ren, Xingming Xu. 2536-2539 [doi]
• Parameter design and manufacture for the 4RRR parallel manipulatorXian Huang, Tiemin Li, Boqiang Xu, Jun Wu. 2540-2543 [doi]
• Study on large-scale in-situ immersion static load test for bearing behavior of collapsible loess pile foundationJin Wei, Zhe Li. 2544-2547 [doi]
• An improved fair subcarrier allocation algorithm for multiuser OFDM systemXiao-juan Zhou, Jun-sheng Zhang. 2548-2552 [doi]
• The computer application in the route measurementWeijun Xing, Yi Li. 2553-2556 [doi]
• The study of shift strategy for pure electric bus without synchronizerXiangyu Dong, Junqiang Xi. 2557-2562 [doi]
• An approach of near infrared image accurate orientation and recognitionXuejuan Hu, Shuangchen Ruan, Chengxiang Liu. 2563-2566 [doi]
• Computer network security and measuresXiaoxia Zheng. 2567-2570 [doi]
• Unified format definition for bulk dataBo Xiao, Bilong Wen. 2571-2575 [doi]
• Computer-aided design of lead compensator of control system via MATLABYanqiu Cui, Yaning Yang, Tao Zhang. 2576-2578 [doi]
• Research on PZT multi-channel power supply and control methodWei Fan, Zhongshen Li, Shouhong Chen. 2579-2582 [doi]
• Study on wetting model with combined level Set-VOF method when drop impact onto a dry surfaceYun-chao Song, Chun-hai Wang, Zhi Ning. 2583-2586 [doi]
• Back analysis of non-adiabatic temperature parameters of roller-compacted concretePeng Liu, Kun Zhang. 2587-2589 [doi]
• Pattern matching and simulation research of extended range electric vehicleXiaogang Wu, Languang Lu, Mingyin Hu, Yuankun Xiao. 2590-2595 [doi]
• Electric braking performance analysis of PMSM for electric vehicle applicationsKangkang Zhang, Jianqiu Li, Minggao Ouyang, Jing Gu, Yan Ma. 2596-2599 [doi]
• Microwave frequency measurement using photonic methodsXiaomin Zhang, Ping Cheng, Juan Ni, Ze Li. 2600-2605 [doi]
• Discuss the modeling technique of 3D animated characters under three-dimensional visual angleManyu Zhang, Weimin Zhao. 2606-2608 [doi]
• Effect of cerium addition on microstructure and mechanical properties of die-cast AM60 alloyWenxian Huang, Hong Yan. 2609-2611 [doi]
• Application of BP neural network in welding joint data processingYuan-Peng Liu, Zhen-hua Wen. 2612-2614 [doi]
• Technology of USB HOST applying in traffic controller based on ISP1161AHaibo Liu, Kefei Song. 2615-2618 [doi]
• Design of UAV video compression system based on H.264 encoding algorithmXiao-lin Chen, Shan-cong Zhang, Jie Liu. 2619-2622 [doi]
• Research on the influence of a contour - Parallel path interval on the surface quality in NC machining a spatially curved surfaceXin Song, Chun Jia. 2623-2627 [doi]
• Research on method choosing parting line in die NC machiningXin Song, Yantao Yang, Bing Yu. 2628-2631 [doi]
• Force analysis of tension hoses based on catenary theoryGuo Kui, Minyan Li, Xingquan Zhai. 2632-2635 [doi]
• Design of train ride quality testing system based on wireless sensor networkChao Gao, Xiaoya Hu, Bingwen Wang, Lejiang Guo, Wei Wang. 2636-2639 [doi]
• Imperfect monitoring and impermanent reputations in infinite dynamic gamesZhang Jiong, Zuwei Yu. 2640-2643 [doi]
• Ant colony algorithm for a class of non-differentiable optimization problemsJiajia He, Zai-En Hou. 2644-2647 [doi]