Abstract is missing.
- Micro solid state silicon plate wind velocity sensorLidong Du, Zhan Zhao, Cheng Pang, Zhen Fang, Yonghong Liu, Youjun Han. 1-4 [doi]
- Performance comparison of methods to evading notching effect for SOG structures in DRIEHaitao Ding, Zhenchuan Yang, Guizhen Yan. 5-8 [doi]
- Electrophoresis deposition and field emission properties of composites films ZnO nanoneedles/CNTsLing-min Yu, Chang-Chun Zhu. 9-12 [doi]
- A precise measurement of quality factor for Planar Microtoroid ResonatorsShubin Yan, Yingzhan Yan, Zhe Ji, Baohua Wang, Shaohui Wang, Guoqing Jiang, Jijun Xiong, Xiongying Ye, Zhaoying Zhou, Wendong Zhang. 13-16 [doi]
- Molecular dynamics simulation on the out-of plane thermal conductivity of monocrystal germanium thin-filmXingli Zhang, Zhaowei Sun, Guoqiang Wu. 17-20 [doi]
- Design and simulation of 4-bit 10-14GHz RF MEMS tunable filterXudong Zou, Kenle Chen, Hualiang Zhang, Jinwen Zhang. 21-24 [doi]
- Tunable MEMS capacitors considering deformation factorDong-Ming Fang, Hai-Xia Zhang, Xiao-Lin Zhao. 25-28 [doi]
- The simulation of frequency-capacitance characteristics of fresh water conductivity sensorJikun Yi, Wei Li, Lingfang Wang, Zhiyu Wen. 29-32 [doi]
- Research on the output characteristics of MEMS convective accelerometer under heavy impactShao-Chun Sun, Geng-Chen Shi. 33-36 [doi]
- Angularly parameterized macromodel extraction for microstructures with a large number of terminalsJinghui Xu, Weizheng Yuan, Honglong Chang, Binghe Ma. 37-40 [doi]
- Sigma-delta modulator based control systems for MEMS gyroscopesMichael Kraft, Haitao Ding. 41-46 [doi]
- Preparation of kerosene based nano-magnetic fluid and its application in pressure difference sensorsRuican Hao, Decai Li. 47-50 [doi]
- Theoretical analysis and fabrication of PDMS-based surface plasmon resonance sensor chipsZhaoxin Geng, Qing Li, Wei Wang, Zhihong Li. 51-54 [doi]
- The analysis and structural design of micro SOI pressure sensorsBian Tian, Yulong Zhao, Zhuangde Jiang, Ling Zhang, Nansheng Liao, Yuanhao Liu, Chao Meng. 55-58 [doi]
- Research on the resonant frequency formula of V-shaped cantileversKai Yang, Zhigang Li, Yupeng Jing, Dapeng Chen, Tianchun Ye. 59-62 [doi]
- Emerging non-CMOS nanoelectronic devices - What are they?Nor Zaidi Haron, Said Hamdioui, Sorin Cotofana. 63-68 [doi]
- Enhancement of mixing performance of water solutions in a micro-mixer with immiscible ferrofluidTsung-Han Tsai, Dar-Sun Liou, Ping-Hei Chen, Chin-Ting Yang. 69-74 [doi]
- Design of a four-arm structure MEMS gripper integrated with sidewall force sensorTao Chen, Liguo Chen, Baixu Liu, Jiachou Wang, Xinxin Li. 75-79 [doi]
- Design and simulation of an active electrostatic bearing for MEMS micromotorsFengtian Han, Zhenbin Fu, Jingxin Dong. 80-85 [doi]
- Silicon Nanowire fabricated by MEMS technology and its application in biochemical detectionYibin Gong, Huamin Gao, Xiang Liu, WenPing Liu, Tie Li, Ping Zhou, Yuelin Wang. 86-89 [doi]
- Research on deep RIE-based through-Si-via micromachining for 3-D system-in-package integrationMin Miao, Yufeng Jin, Hongguang Liao, Liwei Zhao, Yunhui Zhu, Xin Sun, Yunxia Guo. 90-93 [doi]
- Nanomechanical mass sensor for monitoring deposition rates through confined aperturesJulien Arcamone, Marc Sansa, Jaume Verd, Arantxa Uranga, Gabriel Abadal, Nuria Barniol, Marc A. F. van den Boogaart, Juergen Brugger, Francesc Pérez-Murano. 94-97 [doi]
- Design and fabrication of microfluidic chip with micro/nano structuresX. Chen, D. F. Cui, L. L. Zhang. 98-101 [doi]
- Microfabricated breath sensor based on carbon nanotubes for respiration monitoringHai Liu, Xiaohang Chen, Dong Xu, Zhongyu Hou, Yafei Zhang. 102-105 [doi]
- Analysis on electro-thermal property of micro-bubble generator using carbon nanotube heating elementsWenli Zhou, Sanping Wan, Chao Zhu. 106-111 [doi]
- Novel synthesis design of a 3-DOF silicon piezoresistive micro accelerometerTan D. Tran, Minh D. Nguyen, Long T. Nguyen, Tue H. Huynh, Thuy P. Nguyen. 112-115 [doi]
- Nanoscale welding by AFM tip induced electric fieldHaibo Yu, Niandong Jiao, Zaili Dong, Yanli Qu, Wen J. Li, Yuechao Wang. 116-120 [doi]
- Effect of effective viscosity on characteristics of microscale gas journal bearingsHaijun Zhang, Changsheng Zhu, Qin Yang. 121-125 [doi]
- Sensitivity analysis and structure design for tri-mass structure micromachined gyroscopeLiqiang Xie, Dingbang Xiao, Haoxu Wang, Xuezhong Wu, Shengyi Li. 126-129 [doi]
- SOI-based capacitive micromechanical resonator with submicron gap-spacingYi Liu, Yaquan Tang, Xiaomei Yu. 130-133 [doi]
- Direct bonding SOI Wafer based MEMS cantilever resonator for trace gas sensor applicaitonDong Ying, Gao Wei, You Zheng. 134-138 [doi]
- Fabrication of nanobeam using Focused ion beam (FIB) and KOH etchingHaitao Cheng, Heng Yang, Yuelin Wang. 139-142 [doi]
- Design of two-wheel self-balanced electric vehicle based on MEMSHua Sun, Haixu Zhou, Xiang Li, Yanhui Wei, Xiao Li. 143-146 [doi]
- Battery-powered miniaturized electroporation system for in-situ gene transfer in stem cell researchHuiqi He, Donald C. Chang, Yi-Kuen Lee. 147-151 [doi]
- A low-loss RF MEMS switch with dielectric layer on the lower surface of the bridgeKenle Chen, Yueyang Dai, Xudong Zou, Jinwen Zhang. 152-155 [doi]
- Etch-back in DDSOG process by ultrasonic agitation and application to tunneling gyroscope fabricationLingyun Wang, Yibo Zeng, Wenwang Li, Daoheng Sun. 156-159 [doi]
- Simulation of levitation control for a micromachined electrostatically levitated gyroscopeQijun Xiao, Wenyuan Chen, Gaoyin Ma, Feng Cui, Shengyong Li, Weiping Zhang. 160-163 [doi]
- Effect of temperature and elastic constant correction on piezoresistivity of silicon nanobeamsJia-Hong Zhang, Qing-An Huang, Hong Yu. 164-167 [doi]
- Integration of micro temperature sensor and metal foil as gas diffusion layer for micro fuel cellChi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Chen-Hen Lin, Yu-Ming Lee, Wei-Yuan Fan. 168-171 [doi]
- Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformerChi-Yuan Lee, Shuo-Jen Lee, Wen-Pin Shih, Chen-Hen Lin, Chi-Chung Chang, Pei-Zen Chang. 172-175 [doi]
- Design and modeling of a tunable optical antenna enabled by a micromachined actuatorSiva Penmetsa, Tianhua Zhang, Zhongcheng Gong, Tae-Woo Lee, Long Que. 176-180 [doi]
- A white-light source operated polymer-based micromachined Fabry-Perot chemo/biosensorTianhua Zhang, Zhongcheng Gong, Long Que. 181-184 [doi]
- Design of movable contactless conductivity detector for microchip capillary electrophoresisHai-feng Zhang, Xiao-wei Liui, Zhi-cheng Peng, Xi-Lian Wang, Wei Wang, Yu-feng Chen. 190-193 [doi]
- Electroreduction of nitrite based on Ag/PPy nanowires modified electrodesXiuling Zhang, Feng Jin, Jianxin Xing. 194-197 [doi]
- Parameter characterization of anodic bonded electrical interconnect in MEMS/NEMS devicesXuejiao Fan, Dacheng Zhang. 198-201 [doi]
- EWOD using P(VDF-TrFE)Pingan Zhao, Yinqing Li, Xiangyu Zeng, Jia Zhou, Yiping Huang, Ran Liu. 202-205 [doi]
- Integration micro-magnetic sensor and accelerometer microsystem for orienting applicationWeihua Li, Wenzhong Lou, Xin Li, Rongsen Hong, Liang Hu. 206-210 [doi]
- Fabrication and vibration analysis of micro-cross beamsWei-Hsin Gau, Shin-Chun Huang, Yuh-Chung Hu. 211-214 [doi]
- State engine based validation of MEMS process sequencesXu Zhao, Xin Zhao, Guizhang Lu. 215-218 [doi]
- Using micro-reactors to synthesize alloy FeGa::2::O::4:: magnetic nanoparticlesChen-Hsun Weng, Chih-Chia Huang, Chen-Sheng Yeh, Gwo-Bin Lee. 219-222 [doi]
- A microfluidic-based cell culture platform for cellular and subcellular imagingDar-Bin Shieh, Chia-Chun Hsieh, Song-Bin Huang, Gwo-Bin Lee. 223-226 [doi]
- Synthesis of gold nanoparticles using a vortex-type micro-mixing systemSung-Yi Yang, Fong-Yu Cheng, Chen-Sheng Yeh, Huan-Yao Lei, Gwo-Bin Lee. 227-230 [doi]
- Chip scale atomic magnetometer based on SERFSong Xing, Dong Haifeng, Fang Jiancheng. 231-234 [doi]
- A novel design of micro-magnetic sensor guidance system for the blindLiang Hu, Wenzhong Lou, Renlong Song, Chao Gao, Xin Li. 235-237 [doi]
- Controlling of micro/nano fluidics array using single ice valveYang Yang, Jing Liu. 238-243 [doi]
- Theoretical characterization on nano freeze tweezer enabled from convective cooling principleYang Yang, Jing Liu. 244-248 [doi]
- A novel SERS active particle with highly bio-organics absorption affinity for the description of bacteria fingerprintChi-Chang Lin, Chen-Yuan Yu, Ying-Mei Yang, Yung-Ming Chu, Hong-Ping Lin, Hsien-Chang Chang. 249-252 [doi]
- A novel method for the manufacture of MEMS devices with large exposed area based on SOI wafersJianbing Xie, Weizheng Yuan, Honglong Chang. 253-256 [doi]
- Development of a novel perfusion microfluidic cell culture device for cell-based assaysYunhuan Zheng, Jianzhang Wu, Jianbo Shao, Qinghui Jin, Jianlong Zhao. 257-260 [doi]
- A novel multi-direction high shock reliability test on MEMS devicesWenzhong Lou, Renlong Song, Yunjian Liu, Xiaosong Liu, Weihua Li, Wanfeng Lin. 261-264 [doi]
- Numerical and experimental study of Microscale Laser Shock Processing using excimer laserZhigang Che, Liangcai Xiong, Tielin Shi, Zirong Tang, Huayang Cheng, Likun Yang. 265-269 [doi]
- An advantageous fabrication technology to integrate pressure sensor into multi-sensor for micro weather stationCheng Pang, Zhan Zhao, Jiangang Zhang, Li Shi, Lidong Du, Zhen Fang, Yonghong Liu. 270-273 [doi]
- Comparison of methods for sensing contact potential difference of nanocrystalline alloy films using a kelvin actuating capacitorC. K. Chung, W. T. Chang. 274-277 [doi]
- A patch-clamp device with integrated actuators for cell selection and positioningZhongcheng Gong, Krithika Nagarajan, Siva Penmetsa, David Mills, Long Que. 278-281 [doi]
- Single-neuron spinning control system for a non-silicon micromachined rotational gyroGaoyin Ma, Wenyuan Chen, Qijun Xiao, Weiping Zhang, Feng Cui, Kai Li. 282-285 [doi]
- Study on PSZT thin films for microforce sensorsYan Cui, Huilin Chen, Jinsong Xia, Jiaxin Zhao, Jing Wang, Liding Wang. 286-290 [doi]
- Design and analysis of novel solid biaxial micro-gyroscope with special mode excitationYipeng Lu, Weiping Zhang, Xiaosheng Wu, Wenyuan Chen, Feng Cui. 291-294 [doi]
- A micro amperometric immunosensor immobilized with electropolymerized staphylococcal protein a for the detection of salmonella typhimuriumJizhou Sun, Chao Bian, Lan Qu, Shanhong Xia. 295-298 [doi]
- Characterization of line edge roughness and line width roughness of nano-scale typical structuresZhuangde Jiang, Fengxia Zhao, Weixuan Jing, Philip D. Prewett, Kyle Jiang. 299-303 [doi]
- Modeling analysis of piezoelectric micromachined modal gyroscope (PMMG)Xiaosheng Wu, Wenyuan Chen, Weiping Zhang, Yipeng Lu, Feng Cui, Xiaolin Zhao. 304-309 [doi]
- Investigations on electrohydrodynamical drop-on-demand inkjet printingYinhong Dai, Donghang Chen, Lingyun Wang, Daoheng Sun. 310-313 [doi]
- The micropatterns of glutaraldehyde-crosslinked gelatin as ECM for attachment of tumor cellsYu-Cheng Ou, Chih-Wen Hsu, Lung-Jieh Yang, Hsieh-Cheng Han, Yi-Wen Liu, Chien-Yuan Chen. 314-318 [doi]
- Optimization of corona-triggered PDMS-PDMS bonding methodChenying Yang, Wei Wang, Zhihong Li. 319-322 [doi]
- Artifical fish flocked surface as a possible anti-biofoulantJing Wang, Bing Qu, Yan Ming Su, Chao Pan, Wei Guo Cai. 323-326 [doi]
- Boron doped hydrogenated nanocrystalline silicon thin films prepared by layer-by-layer technique and its application in n-i-p flexible amorphous silicon thin film solar cellsKe Tao, Dexian Zhang, Yun Sun, Linshen Wang, Jingfang Zhao, Ying Xue, Yuanjian Jiang, Hongkun Cai, Yanping Sui, Jin Wang. 327-330 [doi]
- Vehicle supervision system based on MEMS geomagnetic sensorJin Wang, Guofeng Li, Yiyi Liu, Yi Lu, Xianhu Gao, Yong Zhang, Ke Tao. 331-334 [doi]
- Nafion coated enzyme free glucose micro-biosensors for anti-fouling of proteinYi Jae Lee, Jung Doo Kim, Jae Yeong Park. 335-338 [doi]
- Analyzing the frequency response of micromachined capacitive inertial devices by the third harmonic detectionDingbang Xiao, Liqiang Xie, Zhanqiang Hou, Xuezhong Wu, Shengyi Li. 339-342 [doi]
- Design and parametric study of a tubular passive micro direct methanol fuel cellXiuling Ji, Yunjian Liu, Wenzhong Lou. 343-347 [doi]
- Using the improved DSMC method to predict the reliability of micro-flow channelsPing Tang, Jian Yang, Jianjun Ye, Jinyang Zheng, Chikong Lam, Ieong Wong, Yanbao Ma. 353-358 [doi]
- The arrowed surface ratchets with hydrophobic parylene for droplet transportationFu-Wen Yeh, Lung-Jieh Yang, Guo-Yuan Hess, Ching-Jiun Lee, Che-Chien Chu, Horn-Jiunn Sheen. 359-362 [doi]
- Diffraction angle prediction of surface micromachined planar curved grating and crossed gratingKuan-Yu Chen, Ju-Nan Kuo. 363-366 [doi]
- Synthesis and studies of spindle-shaped lead selenide nanocrystalsGuangmei Zhai, Daoli Zhang, Lin Yuan, Jianbing Zhang. 367-370 [doi]
- Improvement of a micro-beam in a smart gas sensor with resonating mechanismJia Hao Zhao, Shi-jie Yu, Ke Li, Ying Dong, Qin Zhou, Zheng You. 371-375 [doi]
- Study on the electrical contact property at the interface of the NiCr/TiW filmsGuanggui Cheng, Jianning Ding, Biao Kan, Junziong Wang, Ningyi Yuan. 376-379 [doi]
- Effect of pressure on the Q factor and the resonance frequency of SiN microcantileversKhashayar Babaei Gavan, Joost van der Heijden, Emile W. J. M. van der Drift, Herre S. J. van der Zant. 380-384 [doi]
- DNA ligation using coplanar electrodes electro-wetting-ondielectric (EWOD) deviceHung-Chia Lin, Yi-Ju Liu, Da-Jeng Yao. 385-389 [doi]
- Lamb wave excitation on non-piezoelectric materials using Lorentz force induced by current in meander line structureFei-Bin Hsiao, Yung-Chun Lee, Lee Chang Hsiang. 390-395 [doi]
- Analysis of the self-test characteristics of a micromachined accelerometerWeiping Chen, Xiaoliang Chen, Guoguang Zheng, Xiaowei Liu, Haifeng Zhang. 396-399 [doi]
- Surface contamination-induced resonance frequency shift of cantileversHamed Sadeghian, Chung Kai Yang, Khashayar Babaei Gavan, Hans Goosen, Emile W. J. M. van der Drift, Here van der Zant, Paddy J. French, Andre Bossche, Fred van Keulen. 400-403 [doi]
- Vehicle detection and recognition based on a MEMS magnetic sensorJinhui Lan, Yuqiao Shi. 404-408 [doi]
- Solution growth of HgTe Nanoweires at lowtemperatureAimiao Qin, Yuzi Liu, Zhong Lin Wang. 409-412 [doi]
- Influence of post-annealing on the mechanical and electrical properties of boron-doped nanocrystalline silicon thin filmsJ. N. Ding, H. S. Qi, N. Y. Yuan, Y. L. He, G. G. Cheng. 413-415 [doi]
- SiN-based micro cantilever actuators using NdFeB/Ta permanent magnetic thin filmSen Yao, Shunji Goto, Junpei Sakurai, Tadahiko Shinshi, Minoru Uehara, Hitoshi Yamamoto. 416-419 [doi]
- Optimization of process parameters based on ANN when synthesizing nano-size hydroxyapatite using Solgel methodZongwei Niu, Zhiyong Li, Li Li, Rongguo Hou. 420-423 [doi]
- Thermodynamics analyse of the synthesizing of nano-size hydroxyapatite using Sol-gel methodZongwei Niu, Zhiyong Li, Li Li, Rongguo Hou. 424-427 [doi]
- Fabrication of bulk titanium out-of-plane microneedlesGang Zhao, Wen Li, Guanrong Tang, Jing Chen. 428-431 [doi]
- Spiral capacitor based on copper electroplatingYue Chen, Xiuhan Li, Dongming Fang, Quan Yuan, Haixia Zhang. 432-435 [doi]
- Structural and strain relaxation study of epitaxially grown nano-thick Nd::2::O::3::/Si(111) heterostructureJinxing Wang, Apurba Laha, Andreas Fissel, Dominik Schwendt, Rytis Dargis, Tatsuro Watahiki, Roman Shayduk, Wolfgang Braun, Tianmo Liu, H. Jörg Osten. 436-440 [doi]
- Bottom-up fabrication of special parylene films based on selective growth on Au-coated surfaceYi Zhou, Fei Ding, Chao Ni, Wei Wang, Wengang Wu. 441-444 [doi]
- Layer-by-layer nanoscale-coating of microparticles with a droplet microfluidic deviceShailesh Madisetti, Zhiguo Zheng, Zhongcheng Gong, Siva Penmetsa, Yuri Lvov, Long Que. 445-448 [doi]
- Design and optimization of parylee nanomechanical cantilevers with integrated piezoresistors for surface-stress based biochemical sensingQinglong Zheng, Zhuo Wang, Yong Xu. 449-453 [doi]
- A study on inteference between 3D MEMS inductor and VCOSewan Park, Joonyeop Lee, Hyeon Cheol Kim, Kukjin. 454-457 [doi]
- UV absorption and photoluminescence of nanometer-sized ZnS prepared by different routesYuguang Li, Yinfeng Liu, Liping Wang, Beilei Gu, Haiyan Mao, Hefeng Hu, Li Liu, Ying Gu, Yiben Xia. 458-462 [doi]
- Battery-powered miniaturized electroporation system for in-situ gene transfer in stem cell researchHuiqi He, Donald C. Chang, Yi-Kuen Lee. 463-467 [doi]
- The design and fabrication of a new blood-filtering chip based on SU-8 and PDMSChaohui Wang, Peng Ye, Kerun Lee, Jingju Wang, Jing Wang. 468-471 [doi]
- Low temperature direct bonding for hermetic wafer level packagingLei Nie, Tielin Shi, Zirong Tang, Shiyuan Liu, Guanglan Liao. 472-475 [doi]
- Design, fabrication and characterization of a solid propellant micro-ThrusterXuezhong Wu, Peitao Dong, Zhaoze li, Shengyi Li, Qinghui Liu, Chao Xu, Hong Wan. 476-479 [doi]
- A novel p+ Poly-SiGe Gate CMOS deviceJing Zhang, Kaizhou Tan, Siliu Xu, Zhengfan Zhang, Yukui Liu, Guangbing Chen, Kaicheng Li, Heming Zhang, Huiyong Hu. 480-484 [doi]
- Investigation of InGaN/GaN multiple quantum wells with strain relief behavior for light-emitting diodesT.-W. Chang, T. J. Chung, T. Ru, T. E. Nee, H. C. Lu, G. M. Wu. 485-488 [doi]
- Multi-category human motion recognition based on MEMS inertial sensing dataGuangyi Shi, Yuexian Zou, Yufeng Jin, Yali Zheng, Wen J. Li. 489-493 [doi]
- Distributed MEMS transmission line-based uniplanar compact electromagnetic bandgap (UC-EBG) tunable filtersLi Zhang, Jun Yao, Dajia Wang, HongSheng Zhong. 494-497 [doi]
- Piezoresistive properties of heavily doped P-type polysilicon filmsXuebin Lu, Xiaowei Liu, Rongyan Chuai, Changzhi Shi, Mingxue Huo, Weiping Chen. 498-501 [doi]
- A low-noise CMOS interface circuit for closed-loop accelerometerLiang Yin, Xiaowei Liu, Wei Chen, Weiping Chen, Zhiping Zhou. 502-505 [doi]
- The method of prevent footing effect in making SOI micro-mechanical structureXu Mao, Zhenchuan Yang, Zhihong Li, Guizhen Yan. 506-509 [doi]
- CMOs interface circuitry for a closed-loop capacitive MEMS accelerometerYuntao Liu, Xiaowei Liu, Liang Yin, Weiping Chen, Qun Wu. 510-513 [doi]
- Evalution of bulk titanium DRIE Using SU-8 as soft maskGang Zhao, Yao Tian, Qiong Shu, Jing Chen. 514-517 [doi]
- Shape and thermal effects of metal films on stress-induced bending of surface micromachined curved gratingChen-Chieh Liao, Ju-Nan Kuo. 518-521 [doi]
- Structure optimization of a monolithic high-shock three-axis piezoresistive accelerometer using Ant Colony OptimizationQingzhou Li, Ping Song, Kejie Li. 522-526 [doi]
- Simulation of the novel micro-valve using dynamic analysisC. K. Chung, T. R. Shih, B. H. Wu. 527-530 [doi]
- Metrology of deep trench structures with polarized FTIR reflectance spectrumChuanwei Zhang, Shiyuan Liu, Tielin Shi. 531-534 [doi]
- Characteristics of truncate-angle rhombic micromixer and rapid mold fabrication using CO::2:: laser micromachiningC. K. Chung, T. R. Shih, B. H. Wu. 535-538 [doi]
- Mechanical and dynamical behavior of carbon nanotube with defects: A molecular dynamics simulationJenn-Sen Lin, Shin-Pon Ju, Shih-Wen Yung, Wen-Shian Wu, Meng-Hsiung Weng, Wen-Jay Lee. 539-542 [doi]
- Design and implementation of software system of E-beam lithography based on SEMShuhua Wei, Jinzhao Zhang, Li Han. 547-550 [doi]
- Influence of substrate bias on the resistivity and TCR of nanostructured Ta-Si-N filmsC. K. Chung, Y. L. Chang, T. S. Chen. 551-554 [doi]
- Surface acoustic wave linear motor for two-dimensional optical positioning systemYumei Xing, Yigui Li, Junfeng Zhang, Gaoyang Gao. 555-558 [doi]
- Synthesis of horizontally aligned single-walled carbon nanotubes without external force and their growth characteristicsFubo Rao, Tie Li, Yuelin Wang. 559-562 [doi]
- Extraocular image processing for retinal prosthesis based on DSPYuexian Zou, Guangyi Shi, Yufeng Jin, Yali Zheng. 563-566 [doi]
- A novel integrated micro-scale closed synthetic-jet-like flow field as gas lubrication in MEMS devicesFei Ding, Wenxuan Yu, Tingting Yu, Chao Ni, Ruyan Tang, Wengang Wu. 567-571 [doi]
- Electrical and optical testing system for microplasma in scanning plasma etchingWeiwei Xiang, Li Wen, Hai Wang, Qiuping Zhang, Jiaru Chu. 572-576 [doi]
- Design and fabrication of the microplasma reactor for maskless scanning plasma etchingLi Wen, Qiuping Zhang, Weiwei Xiang, Hai Wang, Jiaru Chu. 577-580 [doi]
- Low voltage plug dispersion compensation for moving field capillary electrophoresis with flow loss via the side channelsLujun Zhang, Andre Bossche. 581-584 [doi]
- A new 2D structure for chemotaxis measurement of adhesive cellsYeon H. Kwak, Soon S. Park, Sung M. Hong. 585-588 [doi]
- Patterned deposition of PEO nanofibersDezhi Wu, Lingyun Wang, Daoheng Sun. 589-592 [doi]
- Calculation of phase transformation of vanadium oxide using MD simulation and its validation by experimental valuesDi Wang, Xiaodong Chen, Qun Zhang, Yu Liu, Jincheng Liu, Lijiang Hu. 593-596 [doi]
- Electrochemical synthesis of gold nanoparticles in polypyrrole for antibody immobilizationLan Qu, Chao Bian, Jizhou Sun, Zhenxing Ren, Jinghong Han, Shanhong Xia. 597-600 [doi]
- Fabrication of compact collateral silicon nanowires based on continuously alternating depositionD. Wu, H. Y. Mao, W. G. Wu. 601-604 [doi]
- Study on phenolic-resin/carbon-fiber ablation composites modified with polyhedral oligomeric silsesquioxanesYu Liu, Zushun Lu, Xiaodong Chen, Di Wang, Jincheng Liu, Lijiang Hu. 605-608 [doi]
- Design of a multi-walled carbon nanotubes vacuum gaugeKi-Young Dong, Youngmin, Seung-Il Moon, Jinwoo Lee, Jinnil Choi, Byeong Kwon Ju. 609-611 [doi]
- Chip scale packaging with surface mountable solder ball terminals for microsensorsAhra Lee, SangChul Lee, Sungsik Lee, Chang Han Je, Sunghae Jung, Myoung-Lae Lee, Gunn Hwang, Byoung Gon Yu, Chang-Auck Choi. 612-615 [doi]
- A high sensitivity quartz tuning fork temperature sensorJun Xu, Bo You, Xin Li, Jing Ma. 616-619 [doi]
- Research on a novel SAW actuator of Floating Electrode Unidirectional TransducerJunfeng Zhang, Yigui Li, Chun Hui, Yumei Xing, Yang Gao. 620-623 [doi]
- Improved adhesion between C-MEMS and substrate by micromechanical interlockingJie Gong, Zirong Tang, Tielin Shi, Guanglan Liao, Lei Nie, Shiyuan Liu. 624-627 [doi]
- SOI digital accelerometer based on pull-in time configurationLukasz S. Pakula, Vijayekumar Rajaraman, Patrick J. French. 628-631 [doi]
- Signal modulation schemes comparison in the telemetry unit for retinal prosthesis systemYuexian Zou, Yali Zheng, Yufeng Jin, Guangyi Shi. 632-636 [doi]
- Integration of micro flow sensor and flexible substrate as GDL in micro fuel cellChi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee, Kuan-Yu Chu. 637-640 [doi]
- Effect of Al thickness on the Al induced low temperature poly-si film crystallization processHsiao-Yeh Chu, Ming-Hang Weng, Ru-Yuan Yang, Chien-Wei Huang, Chia-Hsing Li. 641-644 [doi]
- 3 thin film capacitorsMinh Duc Nguyen, Ruud Johannes Antonius Steenwelle, Paul M. te Riele, Jan Matthijn Dekkers, Dave H. A. Blank, Guus Rijnders. 649-652 [doi]
- Cell affinity of PHBV thin films evaluated by a parallel plate flow chamberYuping Zhang, Yanyan Wang, Lanxin Lv, Shancheng Yan, Haitao Wang, Yong Zhang, Dan Zhu, Ningping Huang, Zhongdang Xiao. 653-656 [doi]
- Effect of opposite side electrodes in organic field-effect transistor structureRawat Jaisutti, Wittawat Yamwong, Sirapat Pratontep, Tanakorn Osotchan. 657-660 [doi]
- Research and evaluation of a high temperature pressure sensor chipZhuangde Jiang, Libo Zhao, Yulong Zhao, Philip D. Prewett, Kyle Jiang. 661-665 [doi]
- Effects of wall temperature on the heat and mass transfer in microchannels using the DSMC methodJianjun Ye, Jian Yang, Jinyang Zheng, Ping Xu, Chikong Lam, Ieong Wong, Yanbao Ma. 666-671 [doi]
- Memory characteristics of double-layer metal and semiconductor heterogeneous nanocrystals embedded in SiO::2::Henan Ni, Liangcai Wu, Zhitang Song, Chun Hui. 672-675 [doi]
- Finite elements study of high mechanical stress in nanostructures for innovative NEMS sensorsXin Xu, Bogdan Bercu, Francois Lime, Laurent Montes. 676-681 [doi]
- A uncooled a-Si infrared detector with novel thermal isolation methodHuajun Fang, Xingming Liu, Litian Liu. 682-685 [doi]
- DC electrical trimming characteristics of polysilicon nanofilms with different doping concentrationsChangzhi Shi, Xiaowei Liu, Rongyan Chuai. 686-689 [doi]
- High sensitivity, low operational temperature ITO nano gas sensor with integrated circuitsShiyou Xu, Yong Shi. 690-693 [doi]
- Effect of mixing hopping sites for carrier transport in organic semiconductor nanodevicesSurachai Pengmanayol, Tanakorn Osotchan. 694-697 [doi]
- Thermo-oxidative stability of Nano-SiO::2:: /bismaleimide compositeDongbing Geng, Liming Zeng, Yi Li. 698-702 [doi]
- High sensitivity capacitive humidity sensor with a novel polyimide design fabricated by MEMS technologyJi Hong Kim, Sung-Min Hong, Jang Sub Lee, Byung-Moo Moon, Kunnyun Kim. 703-706 [doi]
- Fabrication of carbon nanocoils based tactile sensorC. C. Su, C. H. Li, N. K. Chang, T. C. Wu, S. H. Chang. 707-710 [doi]
- A backstepping controller for piezoelectric actuators with hysteresis in nanopositioningAmir Farrokh Payam, Morteza Fathipour, Mohammad Javad Yazdanpanah. 711-716 [doi]
- Design of a feedforward controller for AFM nanopositioning based on neural network control theoryAmir Farrokh Payam, Mohammad Javad Yazdanpanah, Morteza Fathipour. 717-721 [doi]
- Experimental and numerical investigations into high-voltage pulsed DC electric fields for enhancing CE chip performanceJing-Hui Wang, Meng-Ku Chi, Lung-Ming Fu, Che-Hsin Lin. 726-730 [doi]
- Microfabrication of conductive PDMS on flexible substrates for biomedical applicationsHailin Cong, Tingrui Pan. 731-734 [doi]
- Micropattern-assisted nanoassembly: Ordered nanocolloidal array on PEG microstructuresHailin Cong, Alexander Revzin, Tingrui Pan. 735-738 [doi]
- A novel method of anodic bondingWei Tang, Zhe Chen, Haixia Zhang. 739-742 [doi]
- Effect of laser annealing on amorphous silicon carbide films prepared by PECVDPin Lv, Zhe Chen, Alice H. X. Zhang. 743-746 [doi]
- New pumping mechanism by surface waves in a microchannelTzong-Shyng Leu, Horng-Jiann Song. 747-750 [doi]
- Numerical investigation of biochemical binding kinetics on the microfluidic chip with FO-LPRChun-Ping Jen, Ching-Te Huang, Yun-Hung Lu. 751-753 [doi]
- Design and modeling of an electromagnetically excited silicon nitride beam resonant pressure sensorDeyong Chen, Zhengwei Wu, Xiaojing Shi, Junbo Wang, Lei Liu. 754-757 [doi]
- On the mechanical behavior of LIGA nickelGuang He, Geng-Chen Shi. 758-762 [doi]
- Transcutaneous power link design for implanted systemsKui Zou, Xiuhan Li, Haixia Zhang. 763-766 [doi]
- Fabrication of seamless roller mold with excimer laser direct writing technologyYung-Chun Lee, Pin-Chang Chen, Hung-Yi Lin. 767-770 [doi]
- An investigation of buckypapers' Young's modulus utilizing nanoscale modeling and Molecular Dynamics simulationYunguang Ji, Yueh-Jaw Lin, Alper Buldum. 771-774 [doi]
- A novel method for fabricating aspheric fiber lens and its applicationsYung-Chun Lee, Yi-Chien Lin, Chen-Hui Tsai. 775-778 [doi]
- Infrared heating and roller-based contact printing technology for the fabrication of micro/nano-structuresYung-Chun Lee, Hsueh-Liang Chen, Chun-Hung Chen, Hung-Yi Lin. 779-782 [doi]
- Effect of nitrogen flow ratios on microstructure and mechanical properties of nanocomposite Ti-Si-N thin flimsC. K. Chung, J. J. Jhu. 783-786 [doi]
- Microfluidic mixing with electrokinetic instability in a double T-shaped microchannelShou-Ping Hsu, Kao-Feng Yarn, Win-Jet Luo, I-Ting Hsieh, Hong-Jun Ye, Meng-Hua Chung. 787-792 [doi]
- Raman descrimination of Helicobacter pylori fingerprint in dielectrophoresis chipChi-Chang Lin, Ying-Mei Yang, Hsien-Chang Chang. 793-796 [doi]
- A biocompatible affinity MEMS sensor for continuous monitoring of glucoseXian Huang, Siqi Li, Jerome Schultz, Qian Wang, Qiao Lin. 797-802 [doi]
- Development of vacuum packaged CMOS thermoelectric energy harvesterChengkuo Lee, Jin Xie. 803-807 [doi]
- Nanomechanical cantilever sensor using optical nanocavity resonatorChengkuo Lee, Wenfeng Xiang, Jayaraj Thillaigovindan, Fu-Li Hsiao. 808-812 [doi]
- Experimental investigation on the dynamic response of thermal EG-CNT flow sensorsYanli Qu, Zaili Dong, Steve C. H. Tung, Wen J. Li. 813-817 [doi]
- Microfluidic patterning of nanoparticle monolayer: Mechanism analysis and noncontinuously patterning approachZhen Chen, Yu Zhao, Wei Wang, Zhihong Li. 818-821 [doi]
- Plasma lithography for control of cell morphology and proliferationMichael Junkin, Donna D. Zhang, Pak-Kin Wong. 822-826 [doi]
- An electrothermal micromixer for molecular analysisMandy L. Y. Sin, Vinay Gidwani, Vincent Gau, Pak-Kin Wong. 827-831 [doi]
- Nanoengineered platforms for cancer chemopreventionVinay Gidwani, Yi Lu, Donna D. Zhang, Pak-Kin Wong. 832-836 [doi]
- Kinetic and processing studies on a novel technology of producing high purity nano-silicon dioxide from an alumina rich coal fly ash with carbon dioxideGuanghui Bai, Wei Teng, Xianggang Wang, Hui Zhang, Peng Xu. 837-842 [doi]
- Investigation of thermal and methanol-vapor treatments for MgTPP as an optical gas sensorSumana Kladsomboon, Sirapat Pratontep, Theeraporn Puntheeranurak, Teerakiat Kerdcharoen. 843-847 [doi]
- Current capacity and thermal transport in carbon nanofiber interconnectsDrazen Fabris, Tsutomu Saito, Toshishige Yamada, Xuhui Sun, Patrick Wilhite, Cary Y. Yang. 848-853 [doi]
- A DEP chip with arc-shape microelectrode arrays for the separation of different-size particlesCheng-Hsin Chuang, Yu-Chi Chen, You-Ming Hsu, Huei-Sheng Huang, Fei-Bin Hsiao, Chin-Hung Wang. 854-857 [doi]
- Single cell imaging using electrical impedance tomographyTao Sun, Soichiro Tsuda, Klaus-Peter Zauner, Hywel Morgan. 858-863 [doi]
- An improved method to remove anti-footing Al layer after DRIEYuan Li, Zhenchuan Yang, Guizhen Yan. 868-871 [doi]
- Improvement of Au cantilever fabrication process with Cu as a sacrificial layerQiang Liu, Bo Liu, Zhihong Li. 872-876 [doi]
- Functionalized bio-nanoparticles in immunosensing using Surface-Enhanced Raman scattering methodsChi-Chang Lin, Chen-Yuan Yu, Ying-Mei Yang, Yan-Fu Chen, Hsien-Chang Chang. 877-880 [doi]
- A new design methodology for electro-mechanical Sigma- Delta-ModulatorsJian Luo, Haitao Ding, Michael Kraft. 881-884 [doi]
- Fabrication of a novel micro liquid flow sensor using a TaN thin filmC. K. Chung, T.-C. Chen, T. R. Shih, W. T. Chang. 885-888 [doi]
- Design of a novel MEMS IDT dual axes surface acoustic wave gyroscopeQinghui Liu, Xuezhong Wu, Di Di, Peitao Dong, Dapeng Fan. 889-892 [doi]
- Calibration of MEMS accelerometer based on plane optical tracking technique and measurementsZhuxin Dong, Uchechukwu C. Wejinya, Wen J. Li. 893-897 [doi]
- Analysis on thermal balance and design principles of catalytic combustion gas sensorDing-jun Xu, Zheng-yong Zhang, Zhen Yu. 898-903 [doi]
- Application of microfluidic system to construct cross-linked chitosan microfibers by PDMS chipChia-Hsien Yeh, Po-Wen Lin, Qiaole Zhao, Tsung-Che Chou, Yu-Cheng Lin. 904-906 [doi]
- A novel 3D flexible parylene-metal structure fabrication techniqueXianju Huang, Yu Tang, Renxin Wang, Chuang Qian, Wei Wang, Zhihong Li. 907-910 [doi]
- Analysis and design of a micromachined Rb-85 filter in passive rubidium atomic clockShenggui Wang, Liwei Lin, Hang Guo. 911-914 [doi]
- Growth and characterization of PZT thin films with A Pt/Ti layer on silicon substrateYi Zhang, Daqun Bao, Hang Guo. 915-918 [doi]
- Anticancer drug delivery for tumor targeting and therapyYu-Jin Kim, Il Kyu Park, Jin-Soo Kim, Joon Hwang, Eui-Sik Chung, Kang Moo Huh, Yong Kyu Lee. 919-922 [doi]
- The development of piezoelectric biosensor based on nano-crystalline PZT/quartsAnzhou Hou, Henan Ni, Chun Hui, Ailan Xu. 923-925 [doi]
- Study on self-alignment property of silicon nanowire in temperature gradientYanfeng Jiang, Xiaobo Zhang, Bing Yang. 926-929 [doi]
- Research on mixing mechanism of micromixer based on segmented gas-liquid flowYi-Feng Wang, Rui-Jin Wang, Ling-na Wang. 930-934 [doi]
- Gesture recognition for interactive controllers using MEMS motion sensorsShengli Zhou, Qing Shan, Fei-Fei, Wen J. Li, Chung-Ping Kwong, Patrick C. K. Wu, Bojun Meng, Christina K. H. Chan, Jay Y. J. Liou. 935-940 [doi]
- Fabrication and analysis of microfluidic mold insert by micro electrical discharge machiningJeou-Long Lee, Yung-Kang Shen, Yi Lin, Ping-Tun Teng, Chuan-Min Huang. 941-945 [doi]
- Two new micro programmable gratings and their potential applicationsYiting Yu, Weizheng Yuan, Bin Yan, Taiping Li, LanLan Wang. 946-949 [doi]
- Design and analysis of helical flagella propelled nanorobotsS. Subramanian, J. S. Rathore, N. N. Sharma. 950-953 [doi]
- Microfluidic chip of fast DNA hybridization using denature and motion of nucleic acidsYung-Chiang Chung, Yu-Cheng Lin, Chaung-Di Chueh, Chuan-You Ye, Li-Wei Lai, Wei-Chieh Liao. 960-963 [doi]
- The improvement of electrochemical etching process for silicon microchannel platesDing Yuan, Pengliang Ci, Fei Tian, Jing Shi, Shaohui Xu, Peisheng Xin, Lianwei Wang. 964-969 [doi]
- Numerical simulation of an electrokinetic micromixer using harmonic and chaotic electric fieldsHer-Terng Yau, Cheng Chi Wang, Ching-Chang Cho, Ming-Jyi Jang. 970-974 [doi]
- Influence of the bearing number on micro gas bearing systemCheng Chi Wang, Her-Terng Yau, Yen-Liang Yeh, Ming-Jyi Jang, Jing-Fung Lin. 975-979 [doi]
- Research of nano-material doped fiber in SBS slow light systemRu Zhang, Ying Zhang, Peilin Lang, Yuwen Duan. 980-982 [doi]
- Scratch of submicron grooves on aluminum film with AFM diamond tipPing Peng, Tielin Shi, Guanglan Liao, Zirong Tang, Chang Liu. 983-986 [doi]
- Novel optical nanobiosensor assembled with silver nanoparticles on gold surfaceZhong Cao, Meng-Xue Zeng, Ling Zhang, Xi-Xi Huang, Ming-Xing Wang, Fu-Chun Gong, Shu-Zhen Tan. 987-990 [doi]
- The analysis of microtoroid cavity coupling system based on fullwaveShubin Yan, Baohua Wang, Yingzhan Yan, Nini Hao, Shaohui Wang, Xiaohong Ren, Xiongying Ye, Zhaoying Zhou, Chenyang Xue, Jun Liu. 991-995 [doi]
- Flat suppercontinuum generation in the inner cladding fiber with InP nano thin filmYuwen Duan, Ru Zhang, Peilin Lang, Ying Zhang. 996-999 [doi]
- Integrated high sensitivity displacement sensor based on micro ring resonatorXin Liu, Chenyang Xue, Shubin Yan, Jijun Xiong, Wendong Zhang. 1000-1003 [doi]
- Magnetic nanowire-enhanced optomagnetic tweezersKaran K. Mehta, Ting-Hsiang Wu, Eric P. Y. Chiou. 1004-1007 [doi]
- Design of the miniature optical fiber voltage sensorJun Liu, Guoqing Jiang, Shubin Yan, Shaohui Wang, Yingzhan Yan, Yanfeng Jing, Jijun Xiong, Xiongying Ye, Zhaoying Zhou, Wendong Zhang. 1008-1012 [doi]
- Trilayer nanoimprint fabrication and simulation of the silicon nanowire sensor for gas detectionJing Wan, Shao-Ren Deng, Yifang Chen, Ejaz Huq, Ran Liu, Xin-Ping Qu. 1013-1016 [doi]
- Superhydrophilic anti-fog polyester film by oxygen plasma treatmentMin Nie, Pragnesh Patel, Kai Sun, Dennis Desheng Meng. 1017-1020 [doi]
- Wedging leakage flow and its impact on the maximum pressure head of bubble-driven micropumpingRyan Lemmens, Dennis Desheng Meng. 1021-1025 [doi]
- Fuzzy Adaptive Extended Kalman Filter for miniature Attitude and Heading Reference SystemWei Qin, Weizheng Yuan, Honglong Chang, Liang Xue, Guangmin Yuan. 1026-1030 [doi]
- MEMS-based multi-sensor integrated attitude estimation technology for MAV applicationsLiang Xue, Weizheng Yuan, Honglong Chang, Chengyu Jiang. 1031-1035 [doi]
- Acting force comparison of microbeads and hemocytes in microchannel using optical tweezers systemYung-Chiang Chung, Yen-Wen Hu, Tsong-Long Hwang, Po-Wen Chen, Fong-Jian Sie. 1036-1039 [doi]
- Extreme-low-power thermal convective accelerometer based on CNT sensing elementYu Zhang, Wen J. Li, Osamu Tabata. 1040-1042 [doi]
- Experimental investigation of CNT-Based micro bubble generation inside microchannelsPeng Xiao, Wen J. Li, Ruxu Du. 1043-1047 [doi]
- Extreme-low power NaOCl sensor using EG-CNTs as Sensing ElementLi Yang, Mengxing Ouyang, Wen J. Li. 1048-1053 [doi]
- 2 Jungil Park, Sunyoung Ahn, Youngmi Kim Pak, James Jungho Pak. 1054-1057 [doi]
- Micromachined interferometric accelerometer fabricated using SGADER processKang Wu, Xiongying Ye, Feng Chen, Litao Liu, Linrui Guo, Zhaoying Zhou. 1058-1061 [doi]
- Highly effective bacterial removal system using carbon nanotube clustersJin-Woo Kim, Hyung-Mo Moon, Steve Tung, Hyun-Ho Lee. 1062-1064 [doi]
- Exploring the potential of microarray technology for bio/nano sensingJu Seok Lee, Joon Jin Song, Russell Deaton, Jin-Woo Kim. 1065-1068 [doi]
- Fabrication of a stepped shape tip using a self-descending phenomena of meniscusMi-Hyun Kang, Chang-Sin Park, Bo young Choi, Dong-Weon Lee. 1069-1072 [doi]
- Effect of sacrificial layer compliance on thermal stresses of composite MEMS beamsJin Qiu, Shawn Cunningham, Arthur Morris. 1073-1078 [doi]
- Microfluidic high viability separation of neural cellsZhigang Wu, Grzegorz Wicher, Asa Fex Svenningsen, Klas Hjort. 1079-1083 [doi]
- Multi-wall carbon nanotubes film used for determination of salbutamol sulfateShu-long, Zhong Cao, Yu-Ting Zhao, Yi Zhou, Ming-Xing Wang, Yun-Lin Dai, Fu-Chun Gong, Shu-Zhen Tan. 1084-1087 [doi]
- Low temperature growth of ZnO rods by EDTA-assisted hydrothermal synthesisGuangmei Zhai, Hua Gong, Minqiang Wang, Zhonghai Lin, Kaiping Liu, Daoli Zhang. 1088-1091 [doi]
- A novel micro-electrostatic field sensor based on parallel-plate resonatorChunrong Peng, Shanhong Xia. 1092-1095 [doi]
- Investigation of electrostatic bonding time model with point cathodeJialu Tang, Xiaowei Liu, Haifeng Zhang, Xilian Wang. 1096-1098 [doi]
- The study of the improved wavelet thresholding with translation invariant de-noising on capillary electrophoresis signalHai-feng Zhang, Xiao-wei Liui, Xian-hui Shao, Xi-Lian Wang, Bin Zhou. 1099-1102 [doi]
- Design of a novel sensor based on piezo-resistive effect of GaAs/AlGaAs/InGaAs PHEMTJing Cui, Bingzhen Zhang, Jun Liu, Chengyang Xue, Guowen Liu, Xiaojuan Jia. 1103-1106 [doi]
- Fabrication of complicated three dimensional structures utilizing multi-stack bondingMingda Zhou, Yilong Hao, Chengchen Gao, Zhihong Li, Qifang Hu. 1107-1111 [doi]
- Electron mobility in enhanced N-type silicon nanowire MOSFETJie Chen, Tao Guo, Hang Guo. 1112-1116 [doi]
- Analysis of high frequency breakdown of noble gases in A MEMS-based Rb-87 lamp for miniaturized passive rubidium atomic clockJie Chen, Tao Guo, Hang Guo. 1117-1119 [doi]